DOOGEE T10E Smart Tablet User Manual
- June 12, 2024
- DOOGEE
Table of Contents
Thanks for choosing DOOGEE products
User Manual
T10E Smart Tablet
Scan the QR code for more function information https://doogee.cc/manual/p4series/
1) FCC 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2）FCC 15.21
Warning: Changes or modifications to this unit not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
3) FCC 15.105
For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Tablet meets the government’s requirements for exposure to radio waves.
The guide lines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types: Tablet (FCC ID:
2AX4YT10E) has also been tested against this SAR limit. The highest SAR
value reported under this standard during product certification is 1.562W/kg
when properly worn on the body. This device was tested for typical body-worn
operations with the back of the Smart Phone kept 00mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 00cm separation distance between the user’s body and the back of
the Tablet. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided. very high volume, prolonged listening to
a mobile phone can damage your hearing.
01: Speaker
02: Power Button
03: Restart Button
04: Volume Button
05: Microphone
06: Front Camera| 07: Indicator light
08: 3.5 Headphone Jack
09: SIM/TF Card
10: Type-C Port
11: Speaker
---|---
12: Flash
13: Rear camera
How to insert the card
To make sure your pad be able to call, put the SIM card in the following order.
- Press the card pin into the side hole and then the card tray pops up and pull out it.
- Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
- With the pad facing up, insert the card holder into the pad in the direction of the arrow.
How to boot
Non-removable battery Press the power button for 3-5 seconds to boot
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS – video
- When writing a text message
- Select images, videos or other files you want to add, even You can take a new picture or video right away.
- Selecting or sending
Language switching settings
- Main menu–settings-system setting– language and input method
- Language and input method–language–language adding
- Select the language you need, the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the first one.
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is s2.0W/kg.
- In line with the requirements of the national standard GB 21288-2007.
Safety
In order to ensure safely using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, battery or device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
Steps for entering low blue light mode:
- Pull down menu bar-eye comfort mode
- Setting- display -eye comfort mode
Suggestions for healthy use of users:
- Do not use it for a long time without interruption, and pay attention to rest. It is recommended to take a 5-10 minute break every 20-30 minutes.
- When resting, look into the distance for a while to relieve visual fatigue
- When resting, do eye exercises to relax
Function of low blue light mode:
With the increasing popularity of digital products, people spend a lot of time
looking at various display screens (mobile phones, computers, tablets, etc.)
every day. Today’s LCD mainly relies on blue light or ultraviolet light to
excite phosphor to emit light, so we will inevitably be exposed to blue light
or ultraviolet light radiation. Looking at the LCD screen for a long time will
not only cause visual fatigue, but also may cause eye diseases, such as
retinal inflammation, color discrimination, etc. Opening low blue light mode
can reduce the blue light radiation ratio of mobile phones and tablets, reduce
the screen brightness, and reduce the screen color temperature (making the
screen yellow); The total energy of the blue light band and the peak energy of
the blue light band are both suppressed, thereby reducing the damage of the
harmful blue light radiation of the screen to the eye health.
This user manual is for reference only.
The specific functions and product pictures may be slightly different from the
actual ones.Please prevail in kind.
DOOGEE mobile
DOOGEE_official
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>