Delonghi EX Series 8,600 Portable Air Conditioner User Manual

Delonghi EX Series 8,600 Portable Air Conditioner

Product Information

The EX Series Portable Air Conditioner is a versatile appliance that provides cooling and dehumidifying functions. It is designed to be portable and easy to use. The appliance operates on electrical characteristics of 115 V~ 60 Hz. It comes with various accessories including an air outlet flap, control panel, handles, castors, dust filter, air intake grille, air exhaust hose housing, power cable, drainage hose with cap, remote control compartment, and remote control signal receiver. The package may also include additional accessories such as an adapter for window bracket, air exhaust hose, hose adaptor, additional window bracket, window bracket with wing nut, window bracket cap, remote control, end of season accessories bag (not available on all models), end of season dust cover (not available on all models), and stripping foam.

Product Usage Instructions

Electrical Connection

Before using the portable air conditioner, ensure that it is properly connected to a power source. The appliance operates on 115 V~ 60 Hz electrical characteristics. Make sure to use a suitable power outlet. If the outlet is not compatible, choose another outlet or consult a qualified professional for assistance. Before plugging the appliance into the outlet, check that:

• The outlet’s power supply corresponds to the value  indicated on the rating label on the back of the appliance.
• The outlet and electrical circuit are adequate for the appliance.
• The outlet is a 3-hole grounded outlet . If this is not the case, you must choose another outlet. Failure to follow these important safety instructions absolves the manufac-turer of all liability.
• If it becomes necessary, the power cable must be re- placed by a qualified professional only.

Air Conditioning Installation:

For optimal results, follow the suggested minimum distance guidelines provided below:

• Place the portable air conditioner at least 20 inches (50 cm) away from walls or other objects.
• Ensure there is a minimum distance of 20 inches (50 cm) between the air conditioner and any obstruction above it.
• Leave a minimum distance of 36 inches (90 cm) in front of the air conditioner and 32 inches (80 cm) on the sides for proper airflow.
• DOUBLE-HUNG WINDOW
  • Place the window bracket (B5) in the window sill, extend the bracket fully within the window frame (fig. 1).
  • Fix the bracket into place by tightening the wing nut (fig. 2). Attach the provided stripping foam (B10) to the top of the window bracket and then lower the window onto the bracket (should the window bracket be too large for the window the plastic can be cut with a saw by a qualified professional).
  • If the windows are large, use additional window bracket (B4) to cover your window opening, extending it to the required length, then securing it with the locking wing nut supplied (fig. 3).
  • Insert and lock the accessory for window bracket (B1) already attached to the air exhaust hose, into the slot of the window bracket (fig. 4).
  • At the other end, be sure hose adapter’s tab is straight up (like the 12 position on a clock) as shown in fig. 5.
  • Attach assembled hose to the back of the air conditioner (fig. 6).

SLIDING WINDOWS

• Thanks to the locking wing nut, it’s possible to use the window bracket also for sliding windows. Position the hole of the window bracket in the lower corner to allow for correct installation of the exhaust hose.

To install the window bracket:

1. Position the bracket fully within the window frame.
2. Secure the bracket using the provided wing nut.

Note: Refer to figure 1 in the user manual for visual guidance.

3. Auto-evaporation feature:

This portable air conditioner is equipped with an auto-evaporation feature for condensate removal during cooling and dehumidifying modes. This eliminates the need for manual draining of condensate.

4. Maintenance and Disposal:

Maintenance and disposal of the appliance should be carried out by qualified professionals. Do not attempt to disassemble or repair the appliance yourself. If any maintenance or repair is required, contact an authorized Repair Service Center.

Please refer to the complete user manual for detailed instructions and safety precautions.

Important safeguard

• Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many situations as possible. Caution and common sense should be used when operating and installing this air conditioner.
• This appliance has been manufactured to cool and dehumidify domestic environments and must not be used for other purposes.
• It is dangerous to alter or modify the unit’s characteristics in any way.
• The appliance must be installed in accordance with the relevant national legislation.
• Should repairs be necessary, contact the nearest authorized Repair Service Center. Unauthorized servicing can be dangerous.
• Do not use the appliance if it is visibly damaged.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• If the power cable is damaged, it must be replaced by the manufacturer or an authorized technical service centre in order to avoid all risk.
• Always ensure the appliance is plugged into a grounded 3-prong outlet. If you have any doubts check with a qualified electrician.
• Do not use extension cables.
• Before cleaning or maintenance operations, always unplug the unit from the outlet.
• Do not pull on or place strain on the power cord when moving the appliance.
• The appliance should not be installed where the atmosphere may contain combustible gases, oil or sulphur, or near heat sources.
• Do not rest hot or heavy objects on the appliance.
• Clean the filters at least once a week.
• Avoid using heaters near the unit.
• The unit should be transported in a vertical position. If this is not possible secure the unit at an angle, do not lie it horizontally.
• Before transporting the unit, drain the unit. After transportation, wait at least 6 hours before switching the unit on.
• The packaging materials can be recycled. You are therefore recommended to place them in the special containers for differentiated waste collection.
• This appliance is fitted with a special safety device. When the compressor switches off, this device prevents it from switching on again for at least 3 minutes.
• WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Specific warnings for appliances with R410A refrigerant gas
R410A is a refrigerant that complies with European eco logical standards; nevertheless, it is recommended not to pierce the cooling circuit of the machine. At the end of its useful life, deliver the appliance to a special waste collec tion centre for disposal. This hermetically sealed system contains fluorinated gre enhouse gases.

SPECIFIC WARNINGS FOR APPLIANCES WITH UV-C LAMP

• This appliance contains a UV-C lamp.
• Read the maintence instructions before opening the appliance.
• Unintended use of the appliance or damage to the outer cabinet/housing where the UV-C light is exposed, and unit is powered ON, may result in the escape of dangerous UV-C radiation. This radiation, even in small doses, can cause harm to the eyes and skin. Appliances that are obviously damaged must not be operated.
• For cleaning instructions, read “CLEANING AND MAINTENANCE” on page 11 of this manual.

ENVIRONMENTAL INFORMATION:

• This unit contains fluorinated greenhouse gases covered by the Kyoto Protocol.
• Maintenance and disposal must be carried out by qualified personnel only (R410A, GWP=2088).
• Save these instructions
• This product is for household use only

INTRODUCTION

Thank you for choosing a De’Longhi product. Please take a few moments to read the instructions to avoid risks or damage to the appliance.

DESCRIPTION

Description of the appliance  A1 air outlet flap

• A2 control panel
• A3 handles
• A4 castors
• A5 dust filter
• A6 air intake grille
• A7 air exhaust hose housing
• A8 air intake grille
• A9 power cable
• A10 drainage hose with cap
• A11 remote control compartment
• A12 remote control signal receiver
• Description of the accessories (see page 3 – B) B1 adapter for window bracket
• B2 air exhaust hose
• B3 hose adaptor
• B4 additional window bracket
• B5 window bracket with wing nut
• B6 window bracket cap
• B7 remote control
• B8 end of season accessories bag (not on all models) B9 end of season dust cover (not on all models) B10 stripping foam

USE

The instructions below will enable you to prepare your air con- ditioner for operation as efficiently as possible. Before use, make  sure the air intake and air outlet flap are unobstructed.

Please note: This appliance is provided with an auto-evapora-tion feature for condensate removal during cooling and dehu-midifying modes.

OPERATING FROM THE CONTROL PANEL

DESCRIPTION OF THE CONTROL PANEL (C)

• C1. ON/STAND-BY (on/off) key
• C2. Mode selection key (air conditioning, dehumidifying, fan)
• C3. Increase key
• C4. Decrease key
• C5. Air flow selection key (MIN/MED/MAX/AUTO)
• C6. Air conditioning symbol
• C7. Dehumidifying symbol
• C8. Fan symbol
• C9. Swing symbol
• C10. Air flow indicator
• C11. Alarm symbol
• C12. Set temperature display, programmed on/off time
• C13. Timer symbol
• C14. Timer hour indicator
• C15. Selected temperature scale indicator
• C16. UV-Carelight key
• C17. UV-Carelight symbol

CONTROL PANEL OPERATION

TURNING THE APPLIANCE ON AND OFF
Insert the plug in the socket. Two dashes appear on the display indicating that the appliance is in stand-by.

Touch the (C1) key to turn on the appliance. The flap (A1) will open after few seconds. When the appliance comes on, it will start with the last function set before it was shut off. Please note: If start-up is not continued, after a few minutes the display light dims in order to reduce energy consumption. To turn the appliance off, touch the key. Please note: Never turn off the air conditioner by simply pulling the plug. Touch the key in order to put your air conditioner in stand-by and wait a few minutes before pulling the plug. In this manner, the appliance can perform the operating status checks

MODES SELECTION

To select desired operating mode, touch repeatedly the MODE key (C2) until the desired function is selected.

AIR CONDITIONING MODE

This is ideal for hot and humid weather when the room needs to be cooled. This function also helps to dehumidify the air.
To correctly set this mode:

• Touch repeatedly the MODE key (C2) until the air condition-ing symbol appears. The display will show the desired temperature.
• To change the desired temper-ature, touch the (C3) or (C4) key.
• Select the desired air flow by touching the (C5) key.

The speeds available are:

Minimum air flow: when maximum quiet operation is desired.
Medium air flow: when the noise level needs to be low but with a good comfort level.
Maximum air flow: for maximum performance.
Auto: the appliance automatically chooses the best air flow based on the temperature selected and the environmental conditions.

DEHUMIDIFYING MODE

This is ideal for reducing humidity in the room (spring and autumn, damp rooms, rainy periods, etc). For this type of use, the appliance must be set up same as in the air conditioner mode. That is, the air exhaust hose (B2) must be fitted to the appliance to allow the humidity to be discharged outside.

To correctly set this mode:

• Touch repeatedly the MODE key (C2) until the dehumidifying symbol appears.
• The appliance will automatically choose the best air flow.

FAN MODE

When using this mode, the air ex-haust hose (B2) does not need to be attached to the appliance.
To correctly set this mode:

• Touch repeatedly the MODE (C2) key until the fan sym-bol appears.
• Select the desired air flow by touching button (C5).

The air flows available are:

Minimum air flow: when quiet operation is de-sired.
Medium air flow: when the noise level needs to be low but with a good comfort level.
Maximum air flow: for maximum performance.

SELECT THE TEMPERATURE SCALE

The temperature can be displayed in °C or °F. To change the temper-ature unit of measure touch both the increase (C3) and decrease C4) keys for about 10 seconds.

OPERATING FROM THE REMOTE CONTROL INSERTING OR REPLACING THE BATTERIES

• Remove the cover on the rear of the remote control;
• Insert or replace the batteries with two new LR03 “AAA” 1.5V batteries, inserting them correctly (see the directions inside the battery compartment) (fig. 7);
• Replace the cover.

Please note: If the remote control unit is replaced or discarded, the batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak. If the remote control is not be used for a certain length of time, remove the batteries.

USING THE REMOTE CONTROL

• Point the remote control at the receiver no more than 23 feet (7 meters) away from the appliance (fig. 7) without obstacles between the remote control and the receiver.
• The remote control must be handled with care. Do not drop it or expose it to direct sunlight or sources of heat.

Please note: The remote control can be safely stored in the ap-propriate compartment (A11).

DESCRIPTION OF THE REMOTE CONTROL D1. ON/STAND-BY button

• D2. MODE button
• D3. Decrease button
• D4. Increase button
• D5. Air flow selection button
• D6. Swing button
• D7. Timer button
• D8. UV-Carelight button

TURNING THE APPLIANCE ON/OFF

• Plug into the outlet.
• Press the button (D1) to turn the  unit on.
• When turned on, the air conditioner starts operating in the same mode when it was turned off
• To switch the appliance off, press the button (D

Please note: Never switch the appliance off by removing the  plug. Always switch it off by pushing the button an aiting a few minutes before removing the plug. Only in this way will the appliance be able to perform its standard checks.

SELECTING THE OPERATING MODES
To select the desired operating mode, press repeatedly the MODE button (D2) until the desired function is selected. Most of the commands available on the remote control corre-spond to those on the appliance control panel (C).

SELECTING THE TEMPERATURE
In air conditioning mode, press (D3) and (D4) keys to de-crease/increase the desired temperature.

SELECTING THE AIR FLOW
In air conditioning and fan modes, press (D5) button on re-mote control to increase/decrease the desired air flow.

SWING FUNCTION

The swing button (D6) activates and deactivates the swing fun-ction. When the internal fan is running, the swing function di-stributes the air evenly into the room moving the flap forwards and backwards alternatively. If pressed again, the flap will be locked into its current position. NOTE: If the internal fan is not running, the swing function will also not operate. In order to avoid damaging the internal mechanisms, the flap must not be moved manually.

SETTING THE TIMER

The timer allows the delayed start up or shut down of the appli-ance. This function will prevent wasting electricity by optimizing the operating periods.

How to program delayed shut down

• Plug in the appliance an to standby.
• Press the  timer button D7), the timer symbol (C13) and  hours (C14) light up.
• Press the (D3) and 4) buttons until the desired number of  hours to start up appears. Start up can be programmed at any time in the next 24 hours.

When the set time is elapsed, the appliance will start to operate in the same operating mode that was previously set.
To cancel the timer program, press the timer button (D7) twice. The timer symbol (C13) will go off.
Note: Once the timer has been activated, by pressing the timer key only one time, the remaining hours to the start up will be displayed.

UV·Carelight FUNCTION
The UV-C technology can also be activated in the dehumidifier and fan/ventilate modes.
Pinguino UV-Carelight incorporates Ultra-Violet LEDs (UV-C) between the heat exchanger and the air fan.
To turn ON the function, you can touch the button (C16) on the control panel or push the button (D8) on the remote control and repeat to turn OFF. The symbol (C17) on the control panel wil be ON when the UV·Carelight function is active.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residen-tial installation.
• This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s au-thority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) this de-vice may not cause harmful interference, and (2) this device must accept any interference received, including interfer-ence that may cause undesired operation. This Class B digital apparatus complies with Canadian CAN  ICES-3 (B) / NMB-3 (B).

FCC Responsible party:

• De Longhi America
• Upper Saddle River NJ 07452 201-919-4000

SELF-DIAGNOSIS

The appliance has a self diagnosis system to identify a number of warning/malfunctions. Error messages are displayed on the appliance display.

TIPS FOR CORRECT USE

To ensure optimal results from your air conditioner, follow these recommendations:

• Close the windows and doors where air conditioner will be used. When installing the air conditioner semi-perma-nently, you should leave a door slightly open (as little as 1/2 inch – 1 cm) to guarantee proper ventilation.
• Never use the appliance in very damp rooms (laundries for example).
• Protect the room from direct exposure to the sun by par-tially closing curtains and/or blinds to make the appliance much more economical to run.
• Never use the appliance outdoors.
• Make sure there are no heat sources in the room.
• Make sure the air conditioner is standing on a level surface.
• Never rest objects of any kind on the air conditioner.
• Never obstruct the air intake or air outlet flap (see figure below).

CLEANING AND MAINTENANCE

Before cleaning or maintenance, turn the  appliance off by using  the button, then unplug  from the outlet. For safety reasons, never wash the appliance using a water jet. Clean the air filter/filters regularly.

CLEANING THE CABINET

You should clean the appliance with a slightly damp cloth then dry with a dry cloth.

Attention! Never use petrol, alcohol or solvents to clean  the appliance. Never spray insecticide liquids or similar.

CLEANING THE  AIR FILTER

If the filter is dirty, air circulation is compromised and the efficiency of the appliance decreases. It is therefore good practice to clean the filter at regular intervals. The frequency depends on the duration and conditions of operation. If the unit is used constantly or systematically, you are recommended to clean the filter once a week. The filter is housed in the intake grille. To clean the filter, remove as shown in fig. 8.

• Use a vacuum cleaner to remove the dust collected on the filter. If it is very dirty, immerse in warm water and rinse a number of times.
• The water should never be hotter than 104°F.
• After washing the filter, allow it to dry completely before reposi-tioning it. The filter helps capture dust and pollen.

START OF SEASON CHECKS

• Make sure the power cable and plug are undamaged and the ground system is sufficient.
• Follow the installation instructions precisely.

END OF SEASON OPERATIONS
To drain all water from the circuit, remove the external cap by unscrewing it in the counter clockwise direction and allow the water to drain out into a basin (fig. 9).

• When the appliance is empty, replace the caps.
• Clean the filter and dry thoroughly before putting back.
• In order to properly storage the appliance at the end of the sea-son, we suggest you cover it with the supplied end of season dust cover (B9) and you put the accessories in the relevant end of season accessories bag (B8).

TECHNICAL SPECIFICATIONS

• Power supply voltage see rating label
• Max. absorbed power during air conditioning  “
• Refrigerant “
• Cooling capacity “

ONLY FOR SERVICE CENTERS USE
THE WIRING DIAGRAM IS LOCATED INSIDE THE UNIT

LIMIT CONDITIONS

• Room temperature for air conditioning 61° ÷ 95°F (16-35 °C)
• Maximum relative humidity 80% RH

Please note: outside of these conditions, the unit will take longer or may not reach the cooling temperature that is set.
Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a technical service centre appointed by the manufacturer only.
The appliance should be disposed of by a specialist centre appointed by the manufacturer only.
Attention! TO AVOID DAMAGE TO THE UNIT:
NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE ON, 24 HOURS IS RECOMMENDED. After the unit has been on its side, oil needs to return to the compressor to en-sure proper function. Without allowing the unit this time (6-24 hours) the unit may function for only a short time, and then the compressor will break down from lack of oil.

TROUBLESHOOTING

into the outlet
there is no power| wait for the current to return
the internal safety device has tripped| call the toll free customer service number
The air conditioner works for a short time only| there are bends or kinks in the air exhaust hose| position the air hose correctly, keeping it as short and free of curves as possible to avoid bottlenecks
something is preventing the air from being discharged| check and remove any obstacles obstructing air discharge
The air conditioner works, but does not cool the room| windows, doors and/or curtains open| close doors, windows and curtains, bearing in mind the “TIPS FOR CORRECT USE” given above
there are heat sources in the room (oven, hairdryer, etc| minimize heat sources impact by setting on low or unplugging unnecessary sources
the air exhaust hose is detached from the appliance| fit the air exhaust hose in the housing at the back of the appliance (fig. 1).
filter clogged| clean or replace the filter as described above
During operation, there is an unpleasant smell in the room| filter clogged or dirty| clean the filter as described above (fig. 8)
The air conditioner does not operate for about three minutes after restarting it| an internal safety device prevents the appliance from being restarted until three minutes have elapsed since it was last turned off| wait. This delay is part of normal operation.
One of the following messages is displayed: Lt/ Ht / Lh / PF / HL| the appliance has a self diagnosis system to identify a number of malfunctions.| see the SELF-DIAGNOSIS chapter

www.delonghi.com

5715114661_02_0122

References

• De'Longhi | Espresso Machines, Kitchen & Home Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>