ENLITE S-Lite Pro GU10 IP65 Adjustable Spotlight Instruction Manual
- June 4, 2024
- ENLITE
Table of Contents
ENLITE S-Lite Pro GU10 IP65 Adjustable Spotlight Instruction Manual
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE
IMPORTANT INSTALLATION INFORMATION
-
Installation should be carried out in accordance with the latest edition of the I.E.E. Wiring Regulations (BS7671) and taking into consideration the latest Building Regulations. If in doubt, consult a qualified electrician.
-
Mains supply voltage 220-240V AC 50/60Hz
-
Please take note of the IP (Ingress Protection) rating of your luminaire when deciding location.
-
CAUTION: DO NOT ATTEMPT TO ADJUST POSITION OF LUMINAIRE UNTIL IT HAS COOLED DOWN.
-
Please take note of the maximum lamp wattage for this luminaire is 35W halogen bulb.
(LED lamps are recommended) -
Use a suitable IP rated junction box to connect to the mains supply: Brown – (L) Live, Blue – (N) Neutral, Green/Yellow – Earth.
(These fittings are class I and must be earthed.) -
Ensure that ALL electrical connections are tight with no loose strands, including factory made.
-
Not suitable for coastal areas.
IMPORTANT USER INFORMATION
-
Always switch off mains supply before installation, servicing, fitting or changing the lamp.
-
Replace failed lamps immediately. Allow the lamp and fitting to cool before replacing lamp.
Check that the correct lamp type and wattage is fitted. Dispose of failed lamps correctly. -
It is recommended to clean every two to three months to preserve the finish of this product.
Do not use solvents or aggressive cleaning agents. -
If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or his service agent or similar qualified person in order to avoid a hazard.
-
Replace any cracked protective glass immediat ely and use only original parts to do this.
-
Please Note: May not be compatible with PIR’s. Please contact sales office for compatibility.
Safety instruction
Fitting without spike:
Environmental Protection
(W.E.E.E.) – Enlite’s WEEE Reg.No. WEE/BG0130YX (UK Only)
Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any of our products showing this marking (left) must not be disposed of with other household or commercial waste. Enlite does not levy any WEEE disposal charges to its customers for affected WEEE related products. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate any such product from other waste types and recycle it responsibly at your local facilities. Check with your Local Authority, Recycling Centre or retailer for recycling advice. If, when you purchased any Enlite product, your supplier included a WEEE disposal fee, you should then contact your supplier for advice on his take back of the product for the correct disposal.
GUARANTEE
This product is guaranteed for a period of 3 years from the date of purchase. The guarantee is invalid in the case of improper use, installation, tampering, and removal of the Q.C. date label, installation in an improper working environment or installation not according to the current edition of the National Wiring Regulations. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Enlite does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Enlite reserves the right to alter specifications without prior notice.
Support
Enlite
Tel: 01727 836611
Fax: 01727 836622
Website: www.enlitelighting.com
Email: [email protected]