NETGEAR WPN111 RangeMax Wireless USB 2.0 Adapter Installation Manual
- June 12, 2024
- NETGEAR
Table of Contents
NETGEAR WPN111 RangeMax Wireless USB 2.0 Adapter
NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111
These setup instructions assume that you will connect to an access point or wireless router. Estimated Completion 10 minutes.
Installation
-
First, install the WPN111 software.
Insert the NETGEAR CD. If the CD main page does not appear, double-click Autorun.exe on the CD.- a. Click Install the Software. The Check for Updates window opens.
- b. If you are connected to the Internet, click Check for Updates. If not, you can choose to install it from the CD.
- c. Follow the Wizard steps and click Next to continue.
When the software has been installed the Connection Wizard prompts you to shut down the computer.
-
Now, connect the wireless USB adapter.
- a. Locate an available USB port on your PC. When prompted, shut down the computer.
- b. Connect the USB cable to the WPN111 and insert the other end of the cable into the USB slot on your PC. See “Placing the USB Adapter Cradle” on the other side of this card.
- c. Restart your computer.
- d. You will be prompted to select the country where you are located.
- e. Select the country and click Agree.
-
Use the Smart Wizard to set up your wireless USB adapter.
-
a. Windows 2000 users go to Step b. Windows XP or Vista users can set up the wireless adapter either with the NETGEAR Smart Wizard (recommended) or the Windows configuration utilities.
• NETGEAR Smart Wizard: Reveals more information about each network and makes it easier to troubleshoot network connection problems.
• Windows configuration utilities: See the Windows documentation or
“Using Windows XP and Vista Wireless Configuration Utilities” at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm. -
b. Click Next to accept the NETGEAR Smart Wizard.
You will be prompted to let the wizard help you connect to a network (recommended). -
c. Click Next to accept.
-
-
Connect to a wireless network.
-
a. Select the wireless network from the drop-down list, and the wizard records your choice.
Note: Hidden networks do not broadcast the Network Name (SSID). These networks are in the drop-down list, but the Network Name (SSID) is blank.
If the network uses security, then the Smart Wizard detects it. -
b. Follow the Wizard steps for Security (if used) and for saving a Profile.
-
c. After you have reviewed the settings, click Finish.
-
The WPN111 icon appears in the system tray and on the desktop, and the Settings page opens. The wizard initiates your wireless connection. It could take up to a minute for your wireless connection to be established. Check the status bar.
Using the Status Bar
The status bar is located at the bottom of the Settings page.
Understanding the Status Bar
Wireless network| Identifies which wireless network you have joined.
Security| • Locked: security enabled.
• Unlocked: security not enabled.
Channel| The wireless channel used by the network. If many wireless networks
in your area use the same channel they can interfere with one another.
Throughput| Wireless throughput is measured in Megabits per second.
For best performance, connect the WPN111 to a USB 2.0 port. With a USB 1.1 port, the WPN111 throughput is limited to 14 Mbps of the USB 1.1 standard.
Signal strength| More dots indicate a stronger signal. Usually, you will
experience higher throughput when the signal is strongest.
Find a Network| Click Find a Network to open the Connection Wizard.
Connection status| Identifies the status of your network connection.
• Connected to the Internet: Wireless Internet connection is OK.
• Connected to Router: Wireless connection to the router is OK but the router is not connected to the Internet.
• 169.254.x.x or …………………………… The wireless connection to the
router is OK but there is a problem with the router. See the online help or the NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual on the NETGEAR CD for troubleshooting tips.
Placing the USB Adapter Cradle
You can attach the RangeMax™ WPN111 Wireless USB 2.0 Adapter directly to a USB port on your computer, or use the USB cable to extend the range and obtain better wireless reception. Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided in the package for better USB Adapter placement on a notebook computer:
-
The RangeMax™ WPN111 Wireless USB 2.0 Adapter comes with three black fasteners. Locate the one that has a prickly side and attach it to the plastic cradle in the middle of the outside rear.
-
Insert the RangeMax™ WPN111 Wireless USB 2.0 Adapter in the plastic cradle.
-
Place one of the other pieces of loop and hook fastener on the back of your notebook monitor near the top for better reception.
Note: The last piece of fastener can be placed on the side of your PC monitor nearest your wireless access point, if you are using the USB Adapter with a desktop PC. -
Join the pieces of the fastener to attach the USB Adapter in the plastic cradle to the notebook or desktop monitor. See the installation instructions for your operating system before attaching the USB cable to the USB Adapter and your computer.
Technical Support
After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to http://kbserver.netgear.com for product updates and Web support.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
Download this PDF Link:NETGEAR WPN111 RangeMax Wireless USB 2.0 Adapter Installation Manual
FAQ’s
Can the NETGEAR WPN111 adapter be used with a Mac computer?
No, the WPN111 adapter is not compatible with Mac computers. It is designed for use with Windows-based systems.
Does the adapter require any drivers to be installed?
Yes, the adapter requires drivers to be installed for proper functionality. The drivers are typically included in the package or can be downloaded from NETGEAR's website.
Can I use the WPN111 to connect to a 5 GHz Wi-Fi network?
No, the WPN111 supports only the 2.4 GHz frequency band and is not compatible with 5 GHz networks.
What is the range of the WPN111 adapter?
The range of the adapter depends on various factors such as environmental conditions and potential interference. In general, it offers a range typical of 802.11b/g Wi-Fi devices.
Is the WPN111 compatible with Windows 10?
As of my knowledge cutoff date in September 2021, the WPN111 does not officially support Windows 10. It is compatible with Windows 2000, XP, Vista, and 7.
Can I use the WPN111 with a gaming console or smart TV?
The WPN111 is designed for use with Windows-based computers and may not be compatible with gaming consoles or smart TVs.
Does the adapter support WPA3 encryption?
No, the WPN111 does not support WPA3 encryption. It supports WEP, WPA, and WPA2 encryption methods.
Can the WPN111 be used as an access point to create a Wi-Fi hotspot?
No, the WPN111 is a client adapter and cannot be used as an access point to create a Wi-Fi hotspot.
Does the WPN111 require an external power source?
No, the WPN111 draws power directly from the USB port of your computer, so it does not require an external power source.
Is there a way to improve the signal strength of the adapter?
You can try repositioning the adapter to get better signal reception or consider using a USB extension cable to move it to a more optimal location.
What is the warranty period for the WPN111 adapter?
The warranty period for the WPN111 may vary depending on the region and retailer. It is recommended to check the product packaging or NETGEAR's website for warranty details.
Does the WPN111 support WPS (Wi-Fi Protected Setup)?
No, the WPN111 does not support WPS. It requires manual configuration of the Wi-Fi settings.
Reference: NETGEAR WPN111 RangeMax Wireless USB 2.0 Adapter – Device.Report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>