ORIENTek K350 Fiber Master OTDR User Manual
- June 12, 2024
- ORIENTek
Table of Contents
We integrate.
You communicate.
K350
FIBER MASTER OTDR
Application scenarios
KL350 OTDR is widely used in optical network terminals (ONT), FTTH distribution (F2) fiber characterized distribution hubs (FDH), fault diagnosis and fault finding.
Product Features
- Long-haul network testing
- Access network testing
- FTTx/PON testing through splitters
- Compact, rugged, light weight 0.7kg
- All new UI design with innovation
- 32dB Dynamic range
- 1m Event dead zone
- Bult-in OPM、SLS、VFL、RJ45、FIP modules
- Link Map & Pass/Fail judgment functions
- Dual wavelengths testing
Multi-function
Dual Working Mode
Four test modes meet your measurement needs
Real-time test:
Monitors link measurement information, but does not analyze event information.
Average test:
Fixed time measurement, the results and event information will be analyzed
after the measurement.
Intelligent automatic
It is convenient for beginners to quickly complete the test
Expert Manual Mode
Select the expert manual mode to test
Brand-new UI Design
Intelligent trace analysis
Intelligent trace analysis Dynamic display of test results
The test results are shown in a trace with distance on horizontal axis, lost
power on vertical axis. When too many events, the horizontal and vertical axes
can be enlarged to analyze.
Events List
Optical cable breakpoint, loss, length, bending, connection, etc., in the
trace, the loss or reflection obtained by the test is represented by events,
and three event parameters can be viewed at the same time.
Link Map
Splitter Test
Self Calibration
Self Calibration
Convenience to Maintenance
Circuit board
Optical circuit
Optical device
After the machine has been used for a long time, when its accuracy is not enough, it can perform self-calibration, reduce maintenance time and save costs
OTDR Trace Manager
Read and analyze on PC Mass Traces Operation
View the sor file in the OTDR trace manager, mass traces operation, add/delete
events, bidirectional trace analysis, print preview, etc.
Fiber Connector
Standard Package
- Carry Bag
- OTDR main body
- Inspection Certificate
- Power adapter
- Gallus’s
- Quick Reference Guide
- Calibration Certificate
- Brochure-JILONG/TAWAA
Specifications
‘ OTDR Specifications
Model| K350-S| K350-P
Wavelength (nm)| SM 1310/1550| PON 1310/1550/1625 (built-in filter)
Dynamic range (dB)| 32/30| 32/30/28
Number of optical port| 1| 2
Applicable fiber| SM (ITU-T G.652)
Distance range (km)| 0.5,1,2,5,10,20,35,50,75,100,150,200
Pulse width (ns)| 5,10,20,50,100,200,500,1000,2000,10000,20000
Event dead zone1 (m)| 1
Attenuation dead zone2 (m)| 4.
Number of sampling points| Max.80000
_
Sampling resolution| Min.0.04m
Distance measurement accuracy| ±(0.75 m + Measurement distance x 2 x 10-5 +
Sampling resolution)
measurement accuracy
_Loss| ±0.03 dB/dB
Return loss measurement accuracy| ±2 dB
Optical Power Meter Module (Built-in)| ✔| x
OPM
.
| Wavelength (nm)| 800 – 1650nm
Power range| -70 – +6dBm
Measure accuracy| < (±0.2dB or ±5%)
Display resolution| 0.01dB
Optical input port| SC/UPC + 2.5mm Universal ferrule
Stabilized Light Source Module (Built-in)| ✔| ✔
SLS
| Wavelength (nm)| 1310/1550
Output power| ≥-10dBm
Modulation mode| CW, 270 Hz, 1 kHz, 2 kHz
Laser class| Class 1M or Class 1
Optical input port| OTDR port
‘ Visual Fault Locator Module (Built-in)| ✔| ✔
VFL
| Wavelength (nm)| 650
Output power| 10mW
Modulation mode| CW, CHOP (2 Hz)
Laser class| Class 3R
Optical input port| 2.5 mm Universal ferrule type
Fiber Inspection Probe (Built-in) Optional| Optional| Optional
FIP
| Magnification| 250X
Resolution(um)| ≥-1.0
Electrical interface| USB2.0
Optical Connector| FC/UPC,SC/UPC,ST/UPC
Sensor| 1/3 inch
| ✔| ✔
RJ45
| Wavelength (nm)| CAT5, CAT6
Distance of Cable Collation!| 300m
Distance of emitting signal| 300m
General Specifications
Link Map| ✔
Pass/Fail judgment| ✔
Distance unit| m, km, mile, ft, kit
PC Analysis Software| ✔
Languages| English, Espanola, Chinese, Portuguese, Francis, PyCCRL41
Optical connector| SC/UPC (FC/UPC,ST/UPC,LC/UP is Optional)
Display| 3.5-inch color TFT LCD (Resolution: 640 x 480)
Electrical interface| Charge port x 1, USB 2.0 x 3, RJ45 x 2
Operating temperature| -10 – 50°C (0 – 40°C when AC adapter is being used. 0
to 35°C when battery is be charged)
Storage temperature| -20 to 60°C
Altitude| 4000 m
Humidity| 0 to 90% RH (20 to 90% with 739874 AC adapter, non-condensing)
Power requirements| 100 – 240V AC, 50/60Hz (AC adapter)
Battery| 3000mAh
LED Light illumination| ≥15000mcd
Operating time*3| 5 hours
Data storage| Internal storage: ≥1000 waveforms, External storage: USB memory
Dimensions| 118 mm (W) x 218 mm (H) x 55 mm (D)
Weight| Approx. 0.73 kg (including internal battery and protectors, excluding
OTDR unit and options)
Notes:
- Minimum pulse width, return loss: ≥55 dB (≥40 dB for 850/1300 nm), group refractive index: 1.5, at 1.5 dB below the unsaturated peak level.
- Minimum pulse width, group refractive index: 1.5, at a point where the backscatter level is within ±0.5dB of the normal level. For SMF, at 1310nm, return loss: ≥55dB.
- New Battery
All specifications valid at 23°C ± 2°C (73.4°F ± 3.6°F) unless otherwise specified.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>