04994001001 Keuco Reva Adhesive Set Instruction Manual
- June 8, 2024
- KEUCO
Table of Contents
04994001001 Keuco Reva Adhesive Set
Mounting instruction
-
Bonding set
-
Sand the adhesive surface of the mounting plate with the abrasive fl eece and then thoroughly clean the mounting plate and the tile surface withthe i.CLEANER cleaning cloth.
-
Roll up the space containing the adhesive, pushing the adhesive in the direction of the narrow reaction space until the dividing seam bursts open.
-
Push the adhesive into the reaction space by rolling up the pouch. Mix the adhesive together with the reactant in this space.
-
Cut open the pouch and squeeze three hazelnut-sized amounts to the mounting plate. Use cardboard if necessary to hold in place.
-
Press on the mounting plate and allow it to harden for 4 hours. After that carefully remove residual adhesive and mount the accessory.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>