Hobolite Micro 8W Bi-Color Continuous LED Light Instruction Manual
- June 12, 2024
- Hobolite
Table of Contents
Hobolite Micro 8W Bi-Color Continuous LED Light
Features
| Lit| Bluetooth on
---|---|---
Unlit| Bluetooth off
| Blue and lit| Fan on
Unlit| Fan off
Red and flashing| Brightness exceeds 50% when fan is off
WARNINGS
- Please thoroughly read the manual prior to operating the product and operate in strict accordance with the manual.
- Don’t disassemble the product by yourself. If the product requires repair, contact our maintenance personnel.
- Product failures caused by unauthorized disassembly are not covered by warranty, and will be chargeable.
- The product is designed to be actively cooled by fans. Don’t block the fan ducts of the product during operation.
- Don’t touch the heat generating parts of the product during operation to avoid scalding injury.
- The power must be switched off during set-up and break down of the product.
- Don’t submerge the product in water or other liquid/s to avoid safety risk and product failure.
- Allow the product to properly cool after each use before storage.
- The product contains batteries. Don’t store the batteries in hot environments and keep them away from fire.
- Only use the originally supplied accessories to avoid product failure/s.
- Only use the supplied charging adapter and power cable to avoid damage to the product.
App Download
You can download the Hobolite app in the (Apple) App Store and Google Play store by scanning the following QR code.
|
---|---
| 
Product Specification
MICRO
| Power | 8W |
|---|---|
| Lumens (6500K) | 500lm |
| Lumens (2700K) | 360lm |
| Input | AC 100-240V, 50~60Hz |
DC 5V
Battery| 3.7V 2000mAh, 7.4Wh
CRI| 96
TLCI| 96
CCT| 2700-6500K
Dimming| 0-100%
Wireless Method| Bluetooth
Wireless Operating Range| 20m / 65.6ft
Noise| 18dB@1m
Operating Temperature| -10~40°C / 14~104°F
Dimension (Light）| 50×68.9x77mm/1.97×2.71×3.03in
Net Weight (Light）| 235g / 0.52Lbs
**
AEC LIGHTING SOLUTIONS CO., LTD.**
Add: 2548 Bao’an Highway, Jiading District, Shanghai 201801, China
Warranty Terms
We provide a one-year warranty period for the original buyer of the product.
For the detailed warranty scope, please log in our website
www.hobolite.com.
Important notes:
- Please retain your original purchase invoice and warranty card and ensure that the complete supplier information is on the invoice, including the purchase date and product serial number, which will be needed when making a claim against the warranty.
The warranty does not cover:
- Damage caused by improper use, false wiring, incompatible, poor quality or mis-adjusted external devices
- Damage to the appearance of the product from mishandling or abuse.
- Exposure to rain or water
- Damage caused by transportation. Please contact your dealer to issue a claim.
The warranty will be invalid if:
- The product serial number has been torn off or can’t be identified.
- The product has been repaired or modified by unauthorized persons.
FCC STATMENTS
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>