Pawrama P-collar 660 Remote Training Collar User Manual

Pawrama P-collar 660 Remote Training Collar User Manual

Thanks for purchasing!
The dog training collaris designed to let dogs live safely, happily and getalong with people more harmoniously.

Warning Do not use with aggressive dogs. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer.

Caution safety during on-leash training.

It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him no to reach a road or other unsafe area. You must also be physically strong enough to restrain your dog when he tries to chase

Caution Risk of skin damage

Please read and follow the instructions in this manual. Proper fit of the collarisimportant. Acollar worn for too long or made too tighton the pet’s neck may cause skin damage ranging from redness to pressure ulcers. This condition is commonly known as bed sores

• Avoid leaving the collar on the dog for more than 12 hours per day.

• When possible reposition the collaron the pet’s neck every 1to 2 hours

• Never connectalead to the electronic collar; it will cause excessive pressure on the contacts.

• If arash orsore is found, discontinue use of the collar until the skin has healed.
  If the condition persists beyond 48 hours, see your veterinarian

• This productis not a toy, please keep away from children.

• This productis only for use with healthy dogs.

Overview

Remote

A: Tone Button
B: Level +
C: Level –
D: Vibration Button
E: Switch the intensity level of the shock and shock modes
F: Shock Button
G: Mode indication
H: Battery Display
I: Switch dog 1 or dog 2 mode
J: On/Off Button
K: Dog 1 or dog 2 mode
L: Level Display
M: Charging Port

Receiver Collar

P Contact Points
Q. Charging Port (with cover)
R. On/Off Button
S. LED Indicator
T Contact spring sheet

Setting Up the Product

Before you can use the Dog Training Collar, you must setupthe productas below steps:

1. Charging the Remote and the Receiver Collar.
2. Prepare the Remote and turn it on
3. Prepare the Receiver Collarand turniton.
4. Function test, test function of buttons before wearing it on dog.
5. How to use the Test Lamp, test Shock function or use as a screw driver.
6. Pair the Remote and the Receiver Collar, pair them when the product lose its code or pair for a second collar.

Charging the Remote and the Receiver Collar

1. Pluginand fully charge the Remote and the Receiver collar. Forthe initial charge,be sure to charge it for 4 hours, Subsequent charges only take 2-3 hours
2. When full charged, the red LED on the Receiver Collar will become green. The Battery Display of the Remote will stop cycling and appear full.
3. Please replace the rubber cover when the Receiver Collar is full charged

Tips:

1. Excessive charging will shorten battery life. Only charge them when batteries are low.
2. When you’re notusing the collar, please turnitoff to increase the battery life.
   

Note:
Please use the Output:DC 5V 500-800mA charger to charge the product. Don’tuse a charger that does not meet the specifications to charge the product. Prepare the Remote

Turn ON/OFF the Remote

1. Long press the ON/OFF button toturnthe remote ON
2. LCDwillbelighted, and show the information of current channel, battery power and levels. If not, please charge the remote.
3. Long press the ON/OFF button to turn the remote OFF.

Prepare the Receiver
Please use our wrench to install the contact points.

You can also choose to use contact spring sheet, which make the contact more effective and more comfortable.

Turn on the Receiver Collar

• Press the On/Off Button the Green LED light comes on
• In normal mode, the Green LED will flash every 4 seconds, indicating the Receiver Collaris on and ready to receive a signalfrom the Remote.

Turn off the Receiver Collar

• Press and hold the On/Off Button until the Red LED light shuts off (This takes approximately 3 seconds)
• Release the On/Off Button

NOTE:
To extend the life of the batteries, please turn the Receiver Collar off when itis not in use.

Function Test
We recommend you experience firsthand how the different levels feelon yourselfand always begin at the lowest level, and increase the levels up to your personal comfort levels.

1. Place one finger over both Contact Points of the training collar.
2. Press the Vibration Button continuously for 1 to 2 seconds You should feel continuous vibration.
3. Press — to decrease levels. Starting at level 1,press the Shock Button
4. Increase the level until the sensation begins to feel uncomfortable

NOTE: Continuous stimulation will transmit for no more the 10 continuous seconds. To reactivate, release and repress the button.

Tone: sends atone with non-adjustable level to the Receiver Collar.
Vibration: sends a vibration with 1-8 adjustable level to the Receiver Collar.
Shock: sends 0-16 adjustable levels of static stimulation to the Receiver Collar.
 Slide up,control dog 1, slide down,control dog 2
 Long press to turn on, long press to turn off.
+ Press to increase the Shock/Vibration Level
– Press to decrease the Shock/Vibration Level
 Slide up,Adjust the intensity level of the vibration, slide down,Adjust the intensity level of the shock.

Note:
The Shock Level can be adjusted from 1 to 16 levels ,

• please adjust it properly as per your dog’s reaction. Itis not recommended to press and hold the Vibration/Shock
• Button too long to avoid physical or psychological hurt to the dog.
• In order to reduce power consumption,the receiver collar will automatically sleep when there is no operation for 24 hours. Press the ON/OFF button of the receiver collar again to start working again

How to Use the Test Lamp Shock Function Test

1. urnon the Receiver Collar.
2. Hold the Test Lamp contacts against the Contact Points (or Conductive Silicone)
3. Press the Shock Button and the Test Lamp will be lighted. It will be lighter accordingly with the Shock Level increasing.
   

Pair the Remote and the Receiver Collar

1. Use the switch on the Remote to select Dog 1
2. With the Remote turned on and the Receiver Collar turned off, press and hold the ON/OFF Button on the Receiver Collar for 4-5 seconds.
3. The Red & Green LED will blink for about 10 seconds indicating that it is ready for pairing.
4. Press and hold Tone Button and Vibration Button at the same time the Remote and the Receiver Collar for 2-3 seconds, the Green LED on the Receiver Collar will blink for 5 times indicating successful pairing

P ingaSecond Collar with the Remote
Usethe [i§ Button onthe Remote to select Dog 2 Then follow the above pairing steps from 2-4

Dog Training

Selecting The Contact Points and The Contact spring sheet
For the best results, select the correct Contact Points based on your dog’s coat You can use the Contact point separately, oruse the Contact point and spring at the same time

Collar Fitting
Please fit the collar properly so that the Contact Points press firmly against the dog’s skin. When properly fitted, you should be able to put afinger in between the Receiver Collar and dog’s neck

Too loose: The Receiver Collar will move around the dog’s neck, the Contact Points may hurtthe dog’s skin
Too tight: It may cause dog’s to breathe hard
Caution: 1.Donotshave the pet’s neck as this may increase the risk of skin irritation. 2.The collar should notbe worn for more than 12 hours per day. Oritmay cause skin rritation

Find the Best Shock Level for Your Pet
The unitcomes with Up and Down buttons to control the Shock Level, with Level 1 being the lowest level and Level 16 being the highest. The level of Shock best suited for your dog depends on your dog’s temperamentand threshold for Shock. Always startat the lowest level and work your way up. The appropriate level can be found when the dog responds to the Shock with amild reaction, such as a flick of the ear, a lick of the lips, a tensing of the neck muscles etc. The Shock Level may vary depending on the training situation. When highly distracted, dog’s will require a higher level of Shock.

Device Information

Product Specification

The unitneedto be charged under any of below situations

1. The indicator light on the Receiver Collar is emitting a red color every 4seconds or flashes rapidly.
2. The 3 barindicator on the Remote LCD shows just 1 bar.
3. The indicator light on the Remote or Receiver Collar will not come on.
4. The in dicator light on the Remote or Receiver Collar comes on momentarily when any of the Mode Buttons is pressed

Others

Frequently Asked Questions

Is the Vibration/Shock safe for my pet?

While the Vibration/Shock is unpleasant itis harmless to your pet. Electronic training devices require interaction and training from the owner to achieve desired results.

How old does my pethave tobe before using the Remote Training Collar?

Once my petis trained and has been obeying my commands, will he have to

continue to wear the Receiver Collar?

Probably not. You may need to reinforce |training with the Receiver Collar from time to time.

Is the Receiver Collar waterproof?

Yes.

Willlgetexactly 984 feet ofrange withthe Remote Training Collar?

The range of the Remote Training will vary according to terrain, weather, vegetation, as well as transmission from other radio devices. Refer to “To maximize the distance” for tips on maximizing your range.

Howlongcan| continuously deliver| Vibration/Shock to my pet?

The maximum amount of time you can press the Vibration/Shock Button and deliver Vibration/Shock to your pet continuously is 10 seconds. After this, there’s a time-out an Vibration/Shock cannot be delivered for 5 seconds. After the 5 second time-out period, Button can be pressed and Vibration/Shock can be delivered again.

Troubleshooting Guide

My pet does not respond when |
press a button.| Make sure the Receiver Collar has been turned on.
“Ifyour range has reduced from the first time you
used the Remote Training Collar, the battery(s) may be low in either the Remote or Receiver Collar.
Terrain, weather, vegetation, transmission from
other radio devices and many other factors can
impactthe amount of range you have with the unit
+Testthe Receiver Collar. Refer to “How to use the
TestLamp” for details. “Increase the Shock Level. Refer to “Find the Best
Shock Level for Your Pet” for more information. Make sure the Receiver Collar’s Contact Points
are placed snugly against your pet’s skin. Refer to
“Collar Fitting” for more information
---|---
The Receiver
Collar will not
turn on.| Make sure the Receiver Collarhas been charged
Forthe nitial charge, be sure to charge it for 4
hours. Subsequent charges only take 2-3 hours.
The Receiver Collar is not responding to
the Remote.| Make sure the Receiver Collaris on. +Ifthe Indicator Light does not come on when any
button is pressed on the remote, ensure that the
batteries are charged properly. “Ifthe first two solutions did not resolve your problem,
Refer to “Pair the Remote and the Receiver

Warranty and repairinformatio

1-Year Limited Lifetime Warranty
The original purchaser for this unit is provided with 1-YEAR WARRANTY The warranty begins from the date of purchase. For the first year, coverage s for both Parts and Labor on warranty repair services. Accessories such as straps and batteries are covered for the first year only. After the first year, the Limited Lifetime Warranty covers Parts only and does not cover Labor Fees and Accessories. All shipping fees incurred, the cost of Accessories after the first year, and Labor fees associated with out of warranty repair work, are the customer’s responsibility. Labor fees will be variable depending on the extent of the work required. The Limited Lifetime Warranty expires 5 years after To Qualify dossbaiWaeantym production All products must provided a proof of purchase is required to initiate repair work under warranty. We strongly recommend keeping the original receipt. If a proof of purchase is not available at the time of service, we will estimate the age of unit by the serial number. Serial number estimates can differ from the actual purchase date. A serial number estimate is the only method of determining an approximate NatOvvurednder Wariantyoof of purchase. We DO NOT offer warranty for products that have been bought secondhand or as aresold product. We DO NOT replace defective units or provide refunds for products purchased from us after 30 days from the date of purchase. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please sendthe units to us for service and repair. We DO NOT cover the cost of repairs and replacements due to misuse by the owner or dog, improper maintenance, and/or lostunits. Any water damage on the Water Resistant remote and the Water Resistant Receiver of our product series will notbe covered. All replacement costs for either the remote orreceiver willbe the owner’s responsibility. The warranty is void if the unithas been altered or an unauthorized person has damaged the unit while attempting repair work. We reserve the right to retain and discard any parts or accessories that have been found damaged upon replacementand repair.

Procedure for Repair Work
If the unit is malfunctioning, please refer to the “Troubleshooting Guide” in the quick start before sending it back for Service. The cost of shipping products under warranty back is the customer’s responsibility. We are not responsible for units damaged or lost in transition. We are not responsible for loss of training time or inconvenience while the unit is infor repair work. We do not provide loaner units or any form of compensation during the repair period. Acopy of the sales receipt showing the purchase date may be required before warranty work is initiated. Please include a brief explanation outlining the problem and include your name, address, city/state/zip code, daytime phone number, evening phone number, and email address

FCC-USA
This device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions:

1. This device may not cause harmful interference
2. this device must acceptany interference received, including interference that may cause undesired operation

CAUTION: Modification or changes to this equipment not expressly approved by manufacturer may voidthe user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipmentinto an outlet on a circuit different from that to which the receiver s connected
• Consultthe dealer or an experienced radio/ TV technician for help

Web: www.pawrama.com
Tel: (866)7297262

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>