walmart E6 Smart Magnetic Wireless Charger User Manual
- June 12, 2024
- Walmart
Table of Contents
walmart E6 Smart Magnetic Wireless Charger User Manual
Smart magnetic wireless charger
Thank you for choosing our digital products.This product is a smart magnetic wireless charger that allows you to easily experience the fun of magnetic alignment wireless charging. Please read the instruction carefully before using this product and save it for future use.
Product List
- Magnetic Charger: *1
- User Manual: *1
Product parameter
- Input voltage:(compatible with QC/AFC/PD protocol) 5V/2A-9V/2.22A
- Output power:(automatic mobile phone adaptation): 5W-7.5W-10W-15W
- Output current:1A-1.67A
- Output voltage:5-9V 7.5W maximum efficiency:76%
- Charging distance:5mm
Charging method
Magnetic alignment, electromagnetic induction Working frequency:110-205KHZ
Precautions
- Please use a qualified PD protocol or QC protocol power charger, otherwise it may cause unstable charging or abnormal flicker;
- If you need to use a protective case for your iPhone12/ 13/14 during the charging, please use one with Magsafe;
- Do not use a mobile phone protective shell with metal back or a mobile phone protective shell with a thickness greater than 4mm;
- The receiving coil of a mobile phone that supports wireless charging is generally located at the center of the mobile phone.Please place the center of the mobile phone at the center of the charging board to get a better charging experience;
- Do not put metal debris or magnetic cards on the charging board, which may cause metalhair, magnetic card damage, charger damage or other abnormalities;
- If the receiving coil or the transmitting board is overheated and the charging stops during the use, please remove the charging device, After waiting to cool down, and try charging again.
Safety notice
- Do not pull the power cord violently to avoid the power cord from breaking or falling off.
- Do not disassemble CW120 by yourself or throw it into Dre or water to avoid short circuit and electric leakage.
- Do not use CW120 in severe high temperature, humidity or corrosive environment to avoid electric leakage caused by circuit damage.
Thank you for purchasing our CW120 wireless charger. In order to ensure you get reliable after-sales service, please read the following warranty instructions carefully.
Warranty scope
This product fails to work normally or malfunctions during normal use, and once our company confirmed, then can enjoy the company’s after-sales service commitment.
Thank you for choosing us！
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation i s subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any i interference received, including g interference that may cause undesired operation.
Warning: Changes or modifications not exp ressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been te sted and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen tial installation. This equipment generates use s and can radiate r adio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which c an be determined by by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving an tenna.
Increase the separation bet ween the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experi enced radio/TV technician for h elp.
FCC Radiation Exposure Statement:
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>