YAMAHA SR, ATS Series Wall Mounting Sound Bar Installation Guide
- June 12, 2024
- Yamaha
Table of Contents
YAMAHA SR, ATS Series Wall Mounting Sound Bar
Product Information
Wall Mounting Installation Guide
Sound Bar This Wall Mounting Installation Guide provides instructions for qualified service personnel on how to mount the sound bar on a wall. It includes important precautions, necessary items for installation, and guidelines to ensure safe and proper installation.
About this Wall Mounting Installation Guide
-
This guide explains the installation method for qualified service personnel who mount the sound bar on a
wall. -
This guide uses the following signal words for important information.
CAUTION
This content indicates risk of injury.
-
NOTICE
Indicates points that you must observe in order to prevent product failure, damage, or malfunction, as well as to protect the environment. -
NOTE
Indicates notes on instructions, restrictions on functions, and additional information that may be helpful. -
The illustrations in this guide are for instructional purposes only.
-
The company names and product names in this guide are the trademarks or registered trademarks of their respective companies.
NOTE
-
The Quick Guide and the Safety Guide are included with this product. The Quick Guide explains the procedures for this product, from opening the box after purchase to enjoying the sound from a TV or Bluetooth device. General precautions for handling this product are described in the Safety Guide. See this document before installing the soundbar.
-
For details on the functions, see the User Guide of your product.
Precautions
Before mounting the sound bar on a wall, be sure to read the following
precautions for safe installation. Be sure to follow the precautions.
Precautions for mounting the sound bar on a wall
CAUTION
- For proper installation of the sound bar on a wall, make sure to have the work done by the dealer from where you purchased the unit or by a contractor with qualified service personnel. Some skills and experience are required for safe installation.
- Be sure to follow the precautions when mounting the sound bar on a wall. The sound bar may fall, resulting in injury.
- Do not attach it to a wall constructed of weak materials such as drywall or plasterboard.
- Use screws that are of the size specified in this guide and that can support the weight of the installation. Do not use nails, two-sided tape, screws other than the size specified, or screws that are worn out or damaged.
- Fix the cables in place so nothing will accidentally catch on them.
- When hanging the sound bar on the screws, be sure that the connected cables do not put stress on the jacks. Failure to observe this may cause damage to the jacks.
- Check that the sound bar is securely fixed in place immediately after the installation. Yamaha will bear no responsibility for any accidents caused by improper installations.
Precautions after installation
CAUTION
- Do not lean on the wall-mounted sound bar or apply excessive force to its top. Doing so may cause the sound bar to fall.
Items to use for wall mounting installation
Make sure that all of the following items are present before installing the
sound bar.
Items included with this product
- Spacers (×2)
- Mounting template
Screws (commercially available)
In addition to the included items, the following screws (commercially available) are required.
- ( Screws (×2)
Use round head wood screws of the following size:
Tools
Use the following tools for installation.
- Screwdriver
- Use a screwdriver that matches the screws.
- Pencil
- Use to mark the positions for the screws on a wall.
- Tape or thumbtacks
- Use to temporarily attach the mounting template to a wall.
Mounting the sound bar on a wall
- Before mounting the sound bar on a wall, be sure to read the following precautions.
- “Precautions” (p.4)
After installing the spacers and screws on the wall, hang the sound bar on those screws.
-
Attach the mounting template (included) on a wall temporarily.
-
Mark the positions for the screws on the wall using a pencil.
-
Remove the mounting template from the wall.
-
Install the screws and the spacers (included) at the points marked on the wall.
Install the screws on the wall, then hang the screw-hanging holes of the spacers on those
screws.
Be sure to use screws of the size shown in the illustration below. -
Connect cables to the sound bar.
For the connection procedure, see the Quick Guide or User Guide of your product. -
Hang the sound bar on the screws.
The installation is completed.
- Yamaha Global Site
- https://www.yamaha.com/
- Yamaha Downloads
- https://download.yamaha.com/
- 2023 Yamaha Corporation
- Published 06/2023 NV-A0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>