boAt AIRDOPES ALPHA True Wireless Earbuds User Guide
- June 12, 2024
- Boat
Table of Contents
- boAt AIRDOPES ALPHA True Wireless Earbuds
- PACKAGE CONTENTS
- OVERVIEW
- POWER ON (FIRST-TIME USER)
- CONNECTION MODE
- SINGLE EARBUD USAGE
- QUICK GLANCE AT FUNCTIONALITIES
- CHARGING THE EARBUDS
- THE REMAINING CASE BATTERY-LED INDICATIONS
- BASIC FUNCTIONS
- VOICE ASSISTANT
- BEAST™ MODE
- FACTORY RESET
- SPECIFICATIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
boAt AIRDOPES ALPHA True Wireless Earbuds
AIRDOPES ALPHA
Get ready to immerse yourself in musical bliss with your very own pair of boAt
Airdopes Alpha. Please consider this manual as your guiding map toward the
unparalleled shores of the auditory realm. Knowledge of Bluetooth and device
connectivity is essential for steering this boat and therefore we strongly
recommend thorough reading of this manual. Also, you may refer to the same at
times when you face any sort of difficulty.
PACKAGE CONTENTS
- 1x Pair of TWS Earbuds
- 1x Charging Case
- 1x Type-C Charging Cable
- 1x User Manual
- 1x Warranty Card
- 1x Catalogue
- 1x FAQ Card
OVERVIEW
- CTC (Capacitive Touch Control)/Power Button
POWER ON (FIRST-TIME USER)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when the earbuds are inside). Courtesy of our IP™ (Insta Wake N° Pair) technology. the earbuds power on automatically. get connected and enter the connection mode.
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds
Step 2:
After powering on, the earbuds enter the Connection Mode, indicated by
alternate red and blue LED flashes on the primary earbud and blue LED flashes
once every 5 seconds on the secondary earbud.
CONNECTION MODE
- Step 1: Turn on the Bluetooth functionality on your phone/media device and scan.
- Step 2: Search for Airdopes Alpha and pair accordingly.
Congratulations!
Your earbuds are connected successfully via Bluetooth.
Note
- Pairing Mode: It lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above-mentioned procedure
- Airdopes Alpha remembers previously connected devices: once switched on, the earbuds automatically reconnect to the previously connected devices in working range.
SINGLE EARBUD USAGE
- Step 1: Please note that both earbuds can be used in mono mode. Use Smart/Manual Power On for switching on the desired earbud
- Step 2: The Selected earbud automatically enters the connection mode indicated by rapid red & blue LED flashes.
- Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes Alpha’ to connect
Notes:
- To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
- You cannot return to the previous tracks in Mono(single-earbud) mode.
QUICK GLANCE AT FUNCTIONALITIES
- 3 Times: Triple tap on left CTC to activate the default smart voice assistant
- 3 Seconds: Long touch both CTs for 3 seconds to manually power on, indicated by white LED flash for 1 second
- 5 Seconds: Long touch both CTs for 5 seconds to perform factory reset
- 8 Seconds: Long touch either CTC for 8 seconds to manually power off
CHARGING THE EARBUDS
- Step 1: Please insert the earbuds back inside the charging case in the correct orientation and close the lid
- Step 2: In charging status, the red LED Solid turns on when the case lid gets opened. LED stays off when the lid stays closed,
- Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, and the red LED stays turned off
Note
- Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging
- To indicate low earbud battery. red LED blinks thrice every 30 seconds
CHARGING THE CASE
Step:
To charge the case, plug one end of the provided cable into the case and
connect the other to a computer/ wall adapter/power bank, etc.
THE REMAINING CASE BATTERY-LED INDICATIONS
CASE-LED INDICATION WHEN EARBUDS ARE GETTING CHARGED FROM THE CASE
This is to indicate the earbud getting charged from the case (when the case lid gets closed):
- WHITE LED is Solid ON for 8 seconds while charging
- WHITE LED is OFF when Earbuds are charged fully
BASIC FUNCTIONS
- Voice Assistant: Triple tap on the left CTC to activate the default smart voice assistant
- Answer: Single tap the CTC on either earbud to answer an incoming call
- Hang Up/Reject Call: Double tap the CTC on either earbud to end/reject the call
- Play/Pause Music: Single tap either earbud’s TC to play or pause music
- Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
- Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song
Note
- Volume can only be controlled via the media device.
VOICE ASSISTANT
- Step 1: Triple-tap on the left CTC to activate the default smart voice assistant
- Step 2: The respective voice assistant screen pops up and you may place your commands at ease
Tips: You may try the following commands,
- What is the weather?
- Play a song
- Set a reminder
Note
If the voice assistant doesn’t get triggered, then the functionality has to be
first enabled via your media device settings.
ENX TECH
- Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx™ as the mics are equipped with the same and activated by default.
- Deliver your voice without interruptions anywhere – traffic, railway stations, airports, workspace, literally anywhere!
SMART POWER OFF
- Step 1: After usage, remove both earbuds from your ears
- Step 2: Place the earbuds back into the charging case in the correct orientation and close the lid
The earbuds automatically switch off (and enter charging mode)
MANUAL POWER OFF
- Step 1: Long touch either CTC for 8 seconds to manually power off the earbuds
- Step 2: Once the earbuds get turned off, place them back inside the case and close the lid
BEAST™ MODE
- Triple tap the right CTC to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Triple tap the left CTC once again, to turn it off and return to standard Music Mode.
- Made for the Gamers – By Gamers, BEAST™ Mode reduces the latency significantly and improves the overall gaming experience.
FACTORY RESET
Perform the factory reset in case you feel any difficulty while operating your Airdopes.
NOTE:
Before performing a reset, clear “Airdopes Alpha” from the pairing device
history by forgetting the device
- Step 1: Take out the earbuds from the charging case, and long touch the CTC for 5 seconds on both earbuds.
- Step 2: Place the earbuds inside the Case.
- Step 3: Close the lid, wait for 5 seconds.
- Step 4: Take out the earbuds from the charging case and perform a fresh connection,
Note:
To complete the factory reset, all of the above steps should be performed.
Congratulations! Your Airdopes Alpha has been Reset
SPECIFICATIONS
WARNING
- Please follow the instructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the product away from heat sources, as the heat may damage it
- Don’t jam the ports such as the charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbud’s service life.