10shidu A8PLUS Dream Catcher Audio User Manual

DREAM CATCHER AUDIO USER MANUAL

SOUND OF CHANGE

Welcome to use SHIDU digital speaker. A6 is a multifunction portable speaker with Bluetooth and voice amplifier functions, and it can also support Guitar and Instrument input. Please enjoy it after reading the user manual.

Technical Parameters:

Structure Instruction:

1.Power on/off: Long press it for 3 seconds, the green battery indicator light on means power on. Long press it again for 3 seconds, the green battery indicator light out means power off.
2.USB slot: Support USB flash drive, maximum up to 32G (MP3 WAV WMA)( Reading the data of USB flash drive only)
3.TF card slot: Support TF card, maximum up to 32G (MP3 WAV WMA).
4.Bluetooth Indicator light
5.Audio input
6.Monitor jack (Reference function description for details)
7.Live broadcast jack (Reference function description for details)
8.Direct recording jack
9.Bluetooth/Disconnect: Short press this in any mode to enter into Bluetooth waiting for pairing status, long press this button in Bluetooth mode to disconnect.
10.Previous: Short press to select previous audio file.
11.Play/Pause: In audio playing mode, press it to pause; press it again to play.
12.Next: Short press to select next audio file.
13.Mode/Loop: Short press it to select the following modes: AUX mode, Bluetooth mode, USB flash drive mode, TF card mode, UHF mode. When play music on TF card/USB flash drive, long press it for 3 seconds to switch to single song repeat, long press it again to switch back to all repeat.
14.DC 18V Charging port: Charging port, please using original adapter to charge.
15.MIC: Support wired Mic (not included).
16.Guitar input
17.Instrument input
18.Battery indicator light
19.Guitar/Instrument ECHO control
20.Guitar/Instrument volume control
21.Music volume control
22.Music bass control
23.Music treble control
24.Microphone volume control
25.Microphone bass control
26.Microphone treble control
27.Microphone ECHO control
28.Microphone DELAY control

Playing from TF card/USB flash drive:

The speaker will automatically play the music file after insert TF card/USB flash drive, and the previous song and the next song can be selected by short press the ”  ” / “ ” button.

Bluetooth Function:

Please pair with your Bluetooth device as follows:

1. Turn on the amplifier and press “Mode/Loop” key to switch to Bluetooth mode. A voice will prompt “Bluetooth is waiting for connection” and the Bluetooth indicator light will flash.
2. From your mobile setting, turn on the Bluetooth function. Then search for “A6” and connect. Bluetooth pairing is completed with a voice prompt “Bluetooth is connected”.
   When playing music, please keep the amplifier close to the Bluetooth-enable device to maintain a stable connection.

Monitor Function:

1. Plug in your headphones and you can hear the music the machine is playing, including sound of the microphone, to get a more realistic feeling for what you’re recording live. At the sa-me time, the machine still has sound.
2. You can mute it with the remote control, and the machine will have no sound, only the earphones have sound.

Live Broadcast Function:

This feature allows you to achieve better recording effects during live broadcasts.
When you use our machine to play music and use a microphone to record a live broadcast, use the red cable in the standard configuration. One end is plugged into the headphone jack of your mobile phone, and the other end is plugged into the live broadcast jack. This red line is passed from the machine to achieve better recording sound.

Direct Recording Function:

This function allows you to achieve better recording effects for Karaoke APP.
When you are using our machine to sing a song via Karaoke APP, use the red cable to recording the sound directly. One end is plugged into the headphone jack of your mobile phone, and the other end is plugged into the direct recording jack.

Charging the device:

1. Please power off speaker when charging, please use the standard adapter, the other end connects with the power supply AC 220V to charge. Please unplug the adapter timely after fully charged ( the charging time is normally 4-5 hours ).
2. Battery status: The green battery indicator light turns red color means that 20% battery left. When the red battery indicator light flash, the unit needs recharging.
3. The red indicator light is on all the time when charging, and it will go out after fully charged.
4. Please recharge the battery within 48 hours if the voltage is too low. Out of power is bad to the battery.

Wireless Microphone Operation:

1. LCD screen
2. Charging indicator
3. ON/OFF

1.Switch ON / OFF:

1. Long press ” ” to switch on and there will be UHF frequency point by default shows on the screen. Turn on the speaker, and then the speaker and microphone will connect automat-ical. Long press ” ” again to switch off and the screen will go out.
2. Short press “+” or “-” to change frequency point from 700MHz -740MHz.
3. Long press “+” to increase mic volume while long press “2 to decrease mic volume. (Volume level on the microphone from 0-20.)

2.Pair the UHF Wireless MIC Manually:

(This operation only suits for no sound from the MIC)
Step 1: Switch on the speaker, short press “Mode/Loop” key to switch to UHF mode, then long press “Mode/Loop” key 3 secon-ds to enter into UHF wireless pairing status with voice prompt “UHF is waiting for connection”.
Step 2: Switch on the UHF wireless MIC , short press “+” or “-” to change frequency point from 700MHz-740MHz. Quick press the ” ” 3 times and then current frequency stop flash-ing means pairing is successful. Please manually pairing the second microphone in the same way. Then it’ s possible to amplify voice with two wireless MIC.
Note: When pairing the second microphone, please stagger the frequency point of the first microphone to avoid interference with each other.

3.Battery Indication of UHF Wireless MIC:

In working status, it has sufficient battery power with “ ” indication showed on the screen; it’s low battery when screen shows ” ” indication, pls replace AA battery *2 timely.
Note: Please twist-off the battery cover and put the batteries properly. (Please mind the positive & negative anode)

Remote function:

1. Normally, the remote control should be in front of the receiving window and within the scope of 6M & 30°.
2. Please point the remote control toward the receiving window and avoid the obstacle.
3. Please avoid the strong light.
4. Please don’t use old & new battery at the same time.

Note: Please refer to the real product.

1. Mute
2. Volume down
3. Volume up
4. Enter
5. play / Pause
6. Next
7. EQ
8. Numbers
9. Recording play
10. Recording
11. loop
12. Previous
13. Mode
14. ON/OFF

Trouble Shooting:

1.Switch on the speaker but no sound.
1.1.No audio input: Please use another better audio files;
1.2.Haven’t turned on the volume: Please adjust the volume properly;
1.3.No power of speaker:Charge the speaker to see whether screen has been lightened.

2.With sound distortion.
2.1.The volume is too high: Please turn down the volume properly;
2.2.The speaker is broken: Please contact us for maintenance.

3.No sound with MP3 playing.
3.1.The audios’ format in USB flash drive or TF card is wrong: Please turn the format to MP3;
3.2.Chaotic procedure with wrong operation: Please restart the speaker;
3.3.Haven’t inserted the USB flash drive / TF card properly: Please insert the USB / TF card properly.

4.Can only work several minutes after charged.
4.1.The battery is broken: Please change a new same battery;
4.2.The connecting cable of battery is loosened or disconnect-ed: Please contact us for maintenance;
4.3.Hasn’t full charged the speaker: Please full charge it before using.

SHIDU After sales service:
If you have any questions, please feel free to contact us, we will try our best to provide best service.

www.10shidu.com      Email: service@10shidu.com

Shenzhen SHIDU digital Co.,Ltd.
Tel:+86 • 755 • 21635866    Hot line: 4008 939 488
Add:
Building A8, Zone 2, Xinhe Xinxing Industrial Park, Baoan District, Shenzhen, China

G88898-2011;GB17625.1-2012;GB/T13837.2012

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>