denver PPS-42000 Portable Power Station User Manual
- June 12, 2024
- Denver
Table of Contents
denver PPS-42000 Portable Power Station
SAFETY INSTRUCTIONS
Important safety instructions
WARNING: Please read the safety instructions carefully before using the
product for the first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Please keep the product away from pets.
- Warning this power station is with lithium ion battery Cells inside
- Do not try to open the power station.
- Do not short-circuit the unit. Keep the unit away from all metal objects like coins, hairpins, keys etc. to prevent this.
- Do not expose to heat, water or other liquids, moisture, direct sunlight!
- Keep it away from high humidity and dusty places.
- Do not disassemble or reassemble this unit.
- Do not attempt to replace the batteries inside yourself – you may damage the battery pack, which could cause overheating and injury. Repairs or service should only be performed by qualified personnel.
- Do not cover the unit with a towel, clothing or other items.
- The unit may become hot when charging. This is normal. Use caution when handling.
- Battery must be recycled or disposed of separately from household waste. Do not incinerate the battery.
- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture
- We urge owners of this power station to charge the model in a safe way. Disconnect the power station when the power station is fully charged. Do not charge the unit over the required time and without supervision.
- Please remove the charging cable when the power station is fully charged.
- Product operating and storage temperature is from 5 degree Celsius to 35 degree Celsius. Under and over this temperature might affect the function.
- Do not drop or expose to impact shock in any way.
- We recommend that you comply with the temperature range of 10°C to 30°C to obtain the optimal charging capacity. Cold temperatures (below freezing) can affect the unit’s battery capacity due to the chemical characteristics of the battery.
- When charging, keep the unit away from TV radio and other equipment to avoid interference.
- Important. To extend the life of the product, the lithium battery should optimally be charged every 3 months or at least every 6 months.
- When you charge the power station, do not charge it using the DC port and USB port simultaneously for better charging efficiency.
Manufacturer’s name or trade mark, commercial registration number and address|
Shenzhen Run Sheng Feng Power Supply Techonolgy Co., Ltd commercial
registration number: 91440300580068676U
3rd Floor, 4th Building, Zone A Xinfu Industrial Park, Chongqing Road, Fuyong
Street, Bao’an District, Shenzhen, China
---|---
Model identifier| RSF-DY098B-1502000EU
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 15V
Output current| 2A
Output power| 30W
Average active efficiency| 91.2% at 115V/60Hz
91.08% at 230V/50Hz
Efficiency at low load (10%)| 88.99% at 115V/60Hz
87.46% at 230V/50Hz
No-load power consumption| 0.04W at 115V/60Hz
0.06W at 230V/50Hz
Product Description
NOTE: AC outlets, AC output voltage and frequency will vary in different countries or regions. Please refer to the actual product specifications before use.
Product instruction
- How to supply power to AC appliances with this product?
Connect the power plug of the electrical appliance to the AC outlet of the product. Switch on the power button, and the unit will start supplying power to your appliance.
WARNING! AC outlets, AC output voltage and frequency vary in different countries. Please make sure the product rating matches that of the appliance before use. Otherwise, it can lead to dangerous situations.
LED Light function:
- Double tap main power switch to turn on LED light
- To switch between different light modes Double tap main power switch.
When the AC outlet is not in use, turn it off to save power
NOTE: AC outlets, AC output voltage and frequency will vary in different
countries or regions. Please refer to the actual product specifications before
use.
Protection mode:
Short-circuit/overload protection. If the AC outlet is short-circuited or
overloaded (load exceeds 150 W), the unit will shut down the AC output for
protection. Please eliminate the problem and press the AC button to switch the
AC outlet on again.
Some electrical appliances such as refrigerators, ice makers or laser printers
may require a surge power to start or operate for a certain time. The surge
power could exceed 150 W, thus triggering the overload protection of this
unit. Please disconnect the appliances and consult with the respective
manufacturers for further guidance. Please eliminate the problem and press the
AC button to switch the AC outlet again.
How to supply power to USB(C) digital appliances with this product?
Connect the standard USB cable of a digital appliance to the USB port of the
unit, and press the “ ” to turn on the USB port.
- Qualcomm Quick Charge 3.0 technology. This product supports Qualcomm Quick Charge 3.0 technology and the 5 V, 9 V, 12 V/2A maximum output and is therefore suitable for smart USB devices such as mobile phones or tablets that also support the Qualcomm Quick Charge 3.0 technology for fast charging. The actual charging voltage and current depend on the actual USB smart device. Consult the device manufacturer for more information.
- PD Type-C. The PD Type-C port 5 V/2.4 A 9 V/3 A 12 V/3 A 15 V/3 A 20 V/3 A is suitable for smart devices such as mobile phones or tablets that also support the PD fast charging protocol for a quick charge. When in use, you must press the “Power On Key” screen to light up for normal output charging.
How to charge the unit?
-
a. Charging through the AC wall charger
Connect the AC adapter of the charging adapter that comes complete with this product to a household AC outlet to charge the product. When the screen number reaches 100%, the product is fully charged. Please unplug the charging adapter from the AC outlet in time.
-
b. Charging from the solar panel
1. Place your solar panel where it will get as much direct sunlight as possible.
2. Plug the solar panel output into the unit input to start charging. You will know the unit is charging when the blue LED battery indicator lights up and blinks. The unit is fully charged when all battery indicators stop blinking and remain solid.- c. DC port 12 V/50 W output, used to charge 12 V car and home appliances
Product parameters
| Capacity | 155 Wh/11.1 V(or 42000 mAh, 3.7 V) |
|---|---|
| Dimensions (L x W x H) | 186 x 107 x 180 mm |
| Weight | 1.6 kg |
| Built-in battery | Lithium-ion battery cells |
| Charging input | DC adapter 15 V/2 A Wide input voltage charging 5-20 V Solar |
charging: DC 13.5 V-24 V/2 A (Max)
Charging time| 4 – 5 hours
USB output| 2x USB 5 V/2.1 A
QC3.0 output: 5 V/3 A 9 V 2 A 12 V 1.5 A 18 W
1x USB-C 30 W output
AC output| Modified sine wave output:
AC output: 110 V- 230 V AC ± 10%
Output frequency: 50 Hz ± 10%
AC output power| Rated power: 150 W, peak power: 200 W
Battery indicator| LED digital display
Operating temperature| 5°C – 35°C
How to use the solar panel?
- a. Solar panel specifications****
Solar capacity| 40 W
---|---
DC output| DC 18 V/2.22 A
USB output| 2x 5 V/2 A USB ports
Efficiency| 21-22%
Cell type| Monocrystalline silicon
Operating & storage temperature| -20°C to 85°C - b. Instructions for use
1. Unfold the solar panel and expose it to sunlight. Wait about 5 seconds for the light to go on.
2. Connect the devices that need to be charged.
3. Check the device charge status. If charging is unstable, try adjusting the charger’s position to direct sunlight.
4. If sunlight is not sufficient, try using the other power source.Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
Electric and electronic equipment and including batteries contains materials,
components and substances that can be hazardous to your health and the
environment if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly. Electric and electronic equipment and
batteries is marked with the crossed-out trash can symbol, seen above. This
symbol signifies that electric and electronic equipment and batteries should
not be disposed of with other household waste, but should be disposed of
separately. As the end user it is important that you submit your used
batteries to the appropriate and designated facility. In this manner you make
sure that the batteries are recycled in accordance with legislature and will
not harm the environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites, or be collected from households.
Additional information is available at the technical department of your city
Denver A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu