LONE AUDIO LA-30KIT-HP 15W In Wall Speaker Set Instruction Manual
- June 12, 2024
- LONE AUDIO
Table of Contents
LONE AUDIO LA-30KIT-HP 15W In Wall Speaker Set
Product Information
- Product Name: LA-30KIT-HP
- Model Number: LA-30KIT-HP
- Product Type: Audio Unit
- Brand: LONE AUDIO
- Features: This product is equipped with a speaker inside and is certified with the CE mark.
Product Usage Instructions
- Before using the unit, carefully read the instruction manual to fully understand all features and precautions.
- Consult a specialist for advice before using the unit for the first time.
- When switching on the unit for the first time, a temporary smell may occur which is normal and will dissipate.
- Do not open the housing of the unit as it contains voltage-carrying parts.
- Avoid placing metal objects or pouring liquids into the unit to prevent electrical shock and malfunction.
- Keep the unit away from heat sources and do not place it on a vibrating surface. Ensure ventilation holes are not covered.
- The unit is not suitable for continuous use.
- Handle the mains lead carefully to avoid damage.
- Avoid repeatedly switching the unit on and off to extend its lifespan.
- Keep the unit out of the reach of children and do not leave it unattended.
- Do not use cleaning sprays on switches as they can cause dust and grease deposits. Consult a specialist in case of malfunction.
- Avoid forcing the controls of the unit.
- Dispose of electric products responsibly by bringing them to a recycling center.
- Do not attempt to repair or modify the unit yourself as it will invalidate the warranty.
- The warranty does not cover accidents or damages caused by inappropriate use or disregard of the safety recommendations and warnings in this manual.
Always refer to the instruction manual for any specific instructions or troubleshooting steps.
Introductions
Congratulations to the purchase of this LONE AUDIO product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.
- Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
- The unit contains voltage-carrying parts. Therefore do not open the housing.
- Do not place metal objects or pour liquids into the unit this may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
- When unplugging the unit from a mains outlet, always use the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer.
- To avoid fire and shock hazards, do not expose the unit to rain and moisture.
- All repairs should be carried out by a qualified technician only.
- Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rules: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This shortens the lifetime.
- Keep the unit out of the reach of children. Do not leave the unit unattended.
- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
- Do not force the controls.
- This unit is with a speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
- If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise, the battery may be permanently damaged.
- If the battery is damaged please replace it with a battery of the same specifications. And dispose the damaged battery environment friendly.
- If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise, serious damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
- Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if the power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
- Keep the original packing material so that you can transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. LONE AUDIO cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the
carton, check the contents to ensure that all parts are present, and have been
received in good condition. Notify the shipper immediately and retain packing
material for inspection if any parts appear damage from shipping or the
package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it
is important that the product be returned in the original factory box and
packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched off until it has
reached room temperature.
POWER SUPPLY
On the label on the backside of the product is indicated on this type of power
supply must be connected. Check that the mains voltage corresponds to this,
all other voltages than specified, the light effect can be irreparably
damaged. The product must also be directly connected to the mains and may be
used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (fuse).
INSTALLATION
- Connect your speakers correctly with the speaker output terminal of the LA-30KIT-HP amplifier module. For the left speaker, make sure to connect with the left 2 slots of the output terminal. For the right speaker, the right 2slots should be used.
- Only use the supplied adapter to connect the module with the mains supply. The adapter can be inserted in the designated slot.
- Enable the BT function on your device (smartphone, tablet, etc.) containing the music you want to play. Search for possible BT connections and select “LONE AUDIO” to make a connection. If a password is required, enter “1234”.
TECHNICAL SPECIFICATION
- Output Power Max: 60W
- Output Power RMS: 30W
- Diameter Tweeter: 2”
- Diameter Woofer: 5.25”
- Tweeter Type: Dome
- Impedance: 8Ohm
- Frequency Response: 90Hz – 20kHz
- SPL @ 1W/1m: 88dB
- IP Rating: IPX5
- Mounting Depth: 65mm
- Mounting Diameter: 120mm
- Power Supply: 100-240VAC 50/60Hz (15V adapter)
- Power Consumption: 0.4 – 0.2A
- Dimensions (L x W x H): 85 x 45 x 25mm
- Weight (kg): 1.20
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:
- Low Voltage (LVD) 2014/35/EU
- Electromagnetic Compatibility (EMC) 2014/30/EU
- Restriction of Hazardous Substances (RoHS) 2011/65/EU
SPEAKER INSTALLATION
- Drill a hole big enough to fit the speaker (check the technical specification sheet for size).
- Connect the speaker wires to the speaker(+/-).
- Insert the speaker in the hole and screw down each of the screws.