Lucci 286110 Moka 1 Light Floor Lamp Instruction Manual

Lucci 286110 Moka 1 Light Floor Lamp

Product Information

The MOKA 1LT FLOOR LAMP is a stylish and functional lighting fixture designed for indoor use. It is available in two colors: Natural and Black. The lamp has a rated voltage of 220-240V~ and operates at a frequency of 50Hz. It features a maximum wattage of 45W and uses an ES / E27 lamp holder. The floor lamp weighs approximately 4.2kg and has dimensions of Dia:290mm H:1360mm.

Product Usage Instructions

1. Before assembly, installation, and use of the product, carefully read and follow all instructions provided in the user manual.
2. Start by removing all packaging material from the product. Pay attention not to discard any accessories that may be hidden within the packaging.
3. Place the luminaire on a smooth non-scratch surface to facilitate assembly.
4. Ensure that the globe is already installed in the lamp before proceeding with the installation.
5. Follow the provided assembly directions to securely assemble the floor lamp.
6. Once assembled, connect the floor lamp to a suitable power outlet with a compatible voltage (220-240V~) and frequency (50Hz).
7. To turn on the lamp, insert a bulb with a maximum wattage of 45W into the ES / E27 lamp holder.
8. Ensure that the bulb is securely screwed in place.
9. After installation, carefully position the floor lamp in the desired location.

Please note that this product comes with a warranty. Keep the user manual and warranty information for future reference.

To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.

Warranty

• This luminaire is covered by a 12 month warranty from the date of purchase. Please retain proof of purchase.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty

Installation Requirements

• Select a suitable location for this luminaire:

  • Ensure it is on a flat and stable surface.
  • This luminaire is suitable for indoor use only.
  • Do not place flammable material near or over the luminaire.
  • Ensure the luminaire is not installed in direct line of an air vent/system.
  • If the luminaire is placed in an area prone to moisture, ensure that the area is well ventilated and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

• Do not exceed the maximum wattage rating.

• Take care not to pull any electrical wires during unpacking as this may damage the connection.

• Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
  If parts are missing, return the complete product to the place of purchase for inspection or replacement.

• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

• Do not plug into the mains power socket outlet before or during assembly. Only do so after the luminaire is fully assembled with the globe installed and is ready to use for the first time

Installation Directions

1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. Place the luminaire on a smooth non-scratch surface to help with assembly.
2. Remove the lamp holder ring (C) from the lamp holder (D).
3. Install the shade (A) onto the lamp holder (D) and secure with the lamp holder ring (C).
4. Install a globe (B – not included) into the lamp holder of the luminaire (D). Do not exceed the maximum rated wattage.
5. Select a suitable location for the portable luminaire. See the installation requirements above.
6. Insert the plug (F) into the mains power socket outlet and ensure it is fully plugged in.
7. Adjust the shades to your desired angle.
8. Turn power on at the mains power socket outlet.
9. Use the cord line foot switch (G) to turn the luminaire on/off.

Safety Tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
• Young children should be supervised to ensure that they do not play with the portable lamp.
• Handle the luminaire and/or shade with care to avoid any damage or breakage.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
• Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Specifications

SKU #| 286110|
---|---|---
Colour| Natural|
Rated Voltage| 220-240V~ 50Hz
Rated Wattage| Max. 45W
Lamp Holder| ES / E27
Weight| 4.2kg
Dimensions| Dia:290mm    H:1360mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>