SENA 220906 WiFi Docking Station User Guide

SENA 220906 WiFi Docking Station

The Sena WiFi Docking Station is a device that allows you to charge and upgrade the firmware of your Sena main unit. It provides a convenient and efficient way to keep your device powered and up-to-date.

Product Information

• Main Unit Holder with microUSB Connector
• LED Indicators for Charging Status, Firmware Upgrade Status, and WiFi Status
• microUSB Power Port for connecting the WiFi Docking Station
• USB Power and Data Cable for connecting the main unit
• World Wide USB Wall Charger for powering the WiFi Docking Station

Usage Instructions

Powering On:

1. Connect the main unit to the microUSB cable.
2. Attach the microUSB cable to the WiFi Docking Station.
3. Before connecting the main unit, make sure to power it off.
4. Note: If you leave the main unit on when connecting it, the charging LED on the WiFi Docking Station will blink red slowly.

Connection Setup:

1. Open the Sena Motorcycles App.
2. Tap the Menu button ( ) in the top-right corner of the screen and select Update via WiFi.
3. Follow the instructions on the Sena Motorcycles App to connect the WiFi Docking Station to a WiFi access point.
4. Note: To change the WiFi access point, perform a Factory Reset and repeat the steps above. You can download the Sena Motorcycles App for Android and Apple operating systems from www.sena.com.

Upgrading the Firmware of a Main Unit:

The firmware of the main unit can be upgraded automatically while it is charging. If you want to manually upgrade the firmware, change the setting on the Sena Motorcycles App.

Note: Do not unplug the USB Power and Data Cable from the WiFi Docking Station while upgrading the firmware to avoid potential damage to the product.

Factory Reset:

If you want to restore the WiFi Docking Station to its factory default settings, follow these steps:

1. Locate the pinhole reset button on the unit.
2. Gently insert a paperclip into the hole and tap the Factory\ Reset Button with light pressure.
3. The WiFi Docking Station will automatically restart with the three LEDs on.
4. Note: The Factory Reset will restore the WiFi configuration setup, firmware setup, and language setup to their default settings.

For further assistance or customer support, please visit sena.com.

Connection

Notice:
Please use the USB Power and Data Cable and the World Wide USB Wall Charger included in the package or a compatible third-party microUSB cable (5V and higher than 1A) with the WiFi Docking Station. Do not connect the WiFi Docking Station to a USB port on your PC.

LED Description

Charging Status

Disconnected
Charging (Main unit is powered off)
Fully charged

Note:

Charging (Main unit is powered on).
To upgrade the firmware, power off the main unit.

Firmware Upgrade Status

Disconnected or no firmware upgrade available
Upgrading firmware
Firmware upgrade completed

WiFi Status

Disconnected from an WiFi access point
Searching for WiFi access point
Connected to an access point

Powering On

• Insert the USB Power and Data Cable into the microUSB Power Port.

Attaching a Main Unit

• Connect the main unit to the microUSB cable and attach it to the WiFi Docking Station. Before connecting the main unit, power off the unit

Note:
If you leave the main unit on when connecting it, the charging LED on the WiFi Docking Station will blink red slowly.

Connection Setup

1. Open the Sena Motorcycles App.
2. Tap the Menu button ( ) in the top-right corner of the screen and select Update via WiFi.
3. Follow the instructions on the Sena Motorcycles App to connect the WiFi Docking Station to a WiFi access point.

Note:

1. To change the WiFi access point, perform the Factory Reset then repeat the steps above.
2. You can download the Sena Motorcycles App for Android and Apple operating systems from www.sena.com.

Upgrading the Firmware of a Main Unit
The firmware will be upgraded automatically while your main unit is charging. If you want to manually upgrade the firmware, change the setting on the Sena Motorcycles App.

Note:
Do not unplug the USB Power and Data Cable from the WiFi Docking Station while upgrading the firmware. The product may be damaged.

Factory Reset

If you want to restore the WiFi Docking Station to the factory default settings, you can easily reset the unit:

1. Locate the pinhole reset button on the unit.
2. Gently insert a paperclip into the hole and tap the Factory Reset Button with light pressure.
3. The WiFi Docking Station will automatically restart with the three LEDs on.

Note:
The WiFi Docking Station will be restored to factory default settings which include the WiFi configuration setup, the firmware setup and the language setup.

SENA Technologies, Inc.
Customer Support: sena.com

References

• SENA
• SENA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>