Dongguan Haoxun Electronic Technology HX200Q9 Portable Power Source Instruction Manual
- June 5, 2024
- Dongguan Haoxun Electronic Technology
Table of Contents
Dongguan Haoxun Electronic Technology HX200Q9 Portable
Power Source Operation Instruction for Portable Power Source
Please read this operation instruction before using the product.
Product Ports
Product
Features
- Safety: With multiple protection designs, several abnormal conditions such as overcharge, overdischarge, high temperature and short circuit can be easily handled no matter in charging, discharging or standby state to provide reliable guarantee for your mobile phone and digital device.
- Efficiency: With quick charging and discharging efficiency, supporting quick charging and discharging, multi-protocol intelligent output.
- Compatibility: embedded with intelligent USB charge controller, compatible with main stream mobile phone and digital device, supporting main stream quick charging and discharging device.
- Quality: high-quality Li-polymer electric core is selected with customized charging and discharging electric chip.
Product Introduction
Thanks for using this product. This product is a high-capacity outdoor mobile
powe,Two-way fast charge,Support solar charging. Three lighting modes,
constant light, SOS, and flash. It is manufactured using high-quality lithium
polymer batteries and custom charge and discharge chips.
which performs well in safety, efficiency and compatibility, etc. parameter
- Product model: HX200Q9
- Battery type: Li-polymer electric core
- Input parameter: Type-c:5V/3A,9V/2A Micro:5V/2.1A
- Output parameter: Type-C–5V/3A,12V/1.67A,9V/2.77A(Max) 2USB QC–5V/3A,9V/2A,12V/1.5A,4.5V/5A(Max) Wireless charging output：15W(Max）
- Dimension: ~29.5×87.9×175.9 mm
- Usage temperature: 0℃~45℃
Product Operation
After the product stops working, the LED indicator will automatically turn off
in about 32 seconds. If you want to check the current remaining power of the
product, you can press this switch lightly, re-light the LED indicator, and
press 2 times continuously: stop charging
led flashlight
Long press
the key switch to turn on the lighting mode, then short press to turn on the
S0S mode, short press again to turn on the flash mode, and finally short press
to turn off. In any light mode, long press the key switch to turn off the
light
Charging
Charge the product with a brand power adapter connection. LED light shows the current battery charge while charging
capacity
Indicator light
|
0～25%
|
25～50%
|
50～75%
|
75～100%
|
finished charging
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
LED3| | | flicker| bright| bright
---|---|---|---|---|---
LED4| | | | bright| bright
Solar charging
Please put the solar charging board on the front,Let the solar charging board
fully receive the amount of solar energy and charge it.the corresponding
relation between the displayed status and electric quantity is as follows:
capacity
Indicator light
|
0～25%
|
25～50%
|
50～75%
|
75～100%
|
finished charging
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
LED3| | | flicker| bright| bright
LED4| | | | flicker| bright
Discharging
This product uses a smart identification charging design. When the digital
product is connected with a USB power cable, the digital product can be
intelligently and automatically recognized, and the charging function can be
activated. LED light shows the current battery charge during charging
Wireless charging function: align the position of the receiver of the digital
product supporting wireless charging with the position of the wireless
charging indicator of the mobile power supply, Press the button to start the
charging function（The wireless charging is abnormal, there is a foreign object
or the LED5 is red when it is fully charged）. During the charging process, the
LED indicator shows the current battery level.At the same time, LED5 flashes
green to indicate.
capacity
Indicator light
|
low battery
|
0～25%
|
25～50%
|
50～75%
|
75～100%
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | | bright| bright| bright
LED3| | | | bright| bright
LED4| | | | | bright
Notice
- Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of digital product and confirm that the chargingconnection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital product with this product, please select adaptive connecting line by yourself.
- If the LED light of this product goes out during the charging process of the digital product, it means that the battery of the product is low, please charge it immediately.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss.
- If the product enters into protection status due to output short circuit or other reasons (LED has no display afterpressing buttons), it can be recovered by charging activation via external charger.
Warning
Since this product contains Li-ion electric core, it’s forbidden to dismantle
the product shell arbitrarily to avoid possible damage to electric core or
other dangers.
It’s forbidden to arbitrarily dismantle, squeeze, puncture this product or put
it in short circuit, water, fire or exposed to an environment with a
temperature higher than 60℃ (140℉).
FCC Statement
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to Part 18 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.
MPORTANT NOTE FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>