SENA SF1 Rider to Passenger Communication System User Guide
- June 12, 2024
- Sena
Table of Contents
Rider to Passenger Communication System
Sena SF1 Quick Start Guide
Installation
Sena Motorcycles App
- Download
– Android: Google Play Store > Sena Motorcycles
– iOS: App Store > Sena Motorcycles
Sena Device Manager
The Sena Device Manager allows you to upgrade the firmware and configure its
settings directly from your PC or Apple computer. Download the Sena Device
Manager from sena.com
Charging
NOTICE
- This Quick Start Guide (Version 3.0.0 or higher) explains how to operate the SF1 with firmware version 3.0 or higher .
- For operating the SF1 with a firmware version lower than 3.0 , refer to the SF1 Quick Start Guide that is available when you connect the SF1 to the Motorcycles App.
Button Operation
Power On/Off Volume
Adjustment
Battery Check
Phone, Music
Pairing
- The headset will enter the Phone Pairing mode automatically when you initially turn on the headset.
- For more information on phone pairing, refer to the User’s Guide.
Music Operation
Mobile Phone
Call Making and Answering
Intercom Pairing
Intercom Pairing
Troubleshooting
Factory Reset
If you want to restore the Sena SF1 to factory default settings, use the
Factory Reset in the configuration menu. The headset automatically restores
the default settings and turns off.
Fault Reset
Fault Reset
If the Sena SF1 is not working properly for any reason, reset by gently
pushing the pin-hole reset button on the back of the main unit.
SENA Technologies, Inc.
Customer Support:
sena.com
SF Series Quick Reference
| Type | Operation | Button Command | LED |
|---|
Basic
Function| Power on| Press the Center Button and the (+) Button for 1 second|
Solid blue
Power off| Tap the Center Button and the (+) Button| Solid red
Volume adjustment| Tap the (+) Button or the (-) Button| –
Microphone Mute| Press the Center Button and the (-) Button for 1 second| –
Mobile
Phone| Answer mobile phone call| Tap the Center Button| –
End mobile phone call| Press the Center Button for 2 seconds| –
Voice dial| Press the Center Button for 3 seconds|
Speed dial| Press the (+) Button for 3 seconds|
Reject incoming call| Press the Center Button for 2 seconds|
Intercom| Intercom pairing| Press the Center Button for 5 seconds| Red
flashing
Tap the Center Button of any one of the two headsets
Start/End each intercom| Tap the Center Button|
End all intercoms”| Press the Center Button for 3 seconds|
Start Group Intercom”| Tap the (+) Button and the (-) Button at the same time|
Green flashing
End Group Intercom”| Press the Center Button for 3 seconds| –
Music| Play/Pause Bluetooth music| Press the Center Button for 1 second| –
Track forward/back| Press the (+) Button or the (-) Button for I second|
FM Radio “| FM radio on/off| Press the (-) Button for 1 second|
Select preset| Press the Center Button for 1 second|
Seek stations| Double tap the (+) Button or the (-) Button| –
Scan up FM band| Press the (+) Button for 1 second| –
Stop scanning| Press the (+) Button for 1 second|
Save preset while scanning| Tap the center Button|
** Available only in SF4
Setting
Configuration Menu
www.sena.com
3.0.1_EN_March2023
D00153_2.0_March2019