SENA Spider ST1 Motorcycle Mesh Communication System User Guide

SENA Spider ST1 Motorcycle Mesh Communication System

Product Information

• Product Name: Sena Motorcycle Mesh Communication System
• Model: SPIDER ST1
• Version: 2.1.0
• Language: English
• Manufacturer: SENA Technologies, Inc.
• Customer Support: sena.com

Features

• Status LED
• DC Power Charging & Firmware Upgrade Port
• Mesh Intercom Antenna
• Jog Dial
• Mesh Intercom Button
• Phone Button
• Charging LED
• Speaker and Microphone Port

Installation

Using the Clamp Unit

Using the Glued Surface Mounting Plate

Installing the Speakers

Installing the Wired Boom Microphone

Installing the Wired Microphone

Mesh Intercom Antenna

Pulling Out the Mesh Intercom Antenna:
NOTICE

• This Quick Start Guide (Version 2.0.0 or higher) explains how to operate the SPIDER ST1 with firmware version 2.0.0 or higher.
• For operating the SPIDER ST1 with a firmware version lower than 2.0.0, refer to the SPIDER ST1 Quick Start Guide that is available when you connect the SPIDER ST1 to the Sena Motorcycles App.

Basic Operations

• Powering On:
  Press and hold the Power button for 1 second.

• Powering Off:
  Tap the Power button once.

• Volume Up

• Volume Down

Checking the Battery Level:
Tap the Power button once.
Phone Pairing

1. Press and hold the Phone button for 5 seconds until the Phone pairing LED starts blinking.
2. Select “SPIDER ST1” in the list of Bluetooth devices detected on your phone.

Using the Phone

• Answer a Call: Tap the Phone button once.
• Reject a Call: Press and hold the Phone button for 2 seconds.
• End a Call: Tap the Phone button once.
• Voice Dial (in stand-by mode): Tap the Phone button once.

Music Control:

• Play/Pause: Press and hold the Jog Dial for 1 second.
• Track Forward: Rotate the Jog Dial clockwise (right).
• Track Backward: Rotate the Jog Dial counterclockwise (left).

Mesh Intercom

Open Mesh:

• To enable Mesh Intercom, tap the Mesh Intercom button once.
• To disable Mesh Intercom, tap the Mesh Intercom button once.

For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
Mesh Intercom Off
Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.

Open Mesh

Channel Setting (Default: channel 1) in Open Mesh:
Using the Button

• To enter into the Channel Setting, tap the Mesh Intercom button twice.
• To rotate the channel, rotate the Jog Dial clockwise (right) or counterclockwise (left).
• To save the channel, tap the Mesh Intercom button once.

Using the Sena Motorcycles App
You can select the channel through the Sena Motorcycles App.

Group Mesh

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.

1. Creating a Group Mesh:
   • Creating a Group Mesh requires two or more Open Mesh users.
   • Users enter into Mesh Grouping to create a Group Mesh by pressing and holding the Mesh Intercom button for 5 seconds.
   • When Mesh Grouping is completed, the users will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
2. Joining an Existing Group Mesh:

One of the current users in an Existing Group Mesh can allow new users in Open Mesh to join the Existing Group Mesh by entering into Mesh Grouping together .

• * One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.![SENA-Spider-ST1-Motorcycle-Mesh-Communication-System-26](https://manuals.plus/wp-content/uploads/2023/07/SENA-Spider-ST1-Motorcycle-Mesh-Communication-System-26.png)

  • When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.

Downloadable Sena Software

• Download the Sena Motorcycles App at Google Play Store or App Store.
• Download the following items at sena.com.

Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.

Product Details

Icon Legend

Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a Mesh Intercom.

Mesh Reach-Out Request

You (caller) can send a request message to turn on the Mesh Intercom to nearby friends who have it turned off.

1. If you want to send or receive a request massage, you need to enable Mesh Reach-Out on the Sena Motorcycles App.
2. While your headset’s Mesh Intercom is on, you (caller) send a request message using the headset’s Button or the Sena Motorcycles App.
3. Friends who receive the request message need to manually turn on their Mesh Intercom using the headset’s Button or the Sena Motorcycles App.

Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).

Configuration Menu

• Accessing the Configuration Menu
• Navigating Between Menu Options
• Execute Menu Options

Troubleshooting

Factory Reset

Fault Reset
Note: Fault Reset will not restore the headset to the factory default settings.

Quick Reference

References

• SENA
• SENA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>