MOSITOECO MST-F304A Remote Control Instruction Manual

October 30, 2023
MOSITOECO

MOSITOECO MST-F304A Remote Control Instruction Manual
MOSITOECO MST-F304A Remote Control

Product Overview

Product Overview

As shown in the figure:

  1. button: to turn light ON or OFF。
  2. 1 button: for fan LOW speed。
  3. 0 button: to turn fan OFF。
  4. 2 button: for fan MEDIUM speed。
  5. 3 button: for fan HIGH speed。
  6. REDLED: Indicator light: When pressing the button, this light will light up and the remote control will send instructions.

Restore electrical power.Within 30 seconds of restoring electrical power, press and hold the “0”button on the remote neurotransmitter for 5 seconds or until eight on the fan blink twice Use the remote control transmitter to test the light and fan functions to confirm the learning process is complete.

Tap button quickly to turn lights off or on. Hold button down to increase or decrease or decrease lights. If you press button in excess of 0.7 seconds, it becomes a dimmer. The lights vary cyclically in 8 seconds. The light button has an auto resume function, which keeps the light at the same brightness as the last time it was turned of

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

The devices has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction

MOSITOECO Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals