compulocks TCDP04209IPDSB Rise Pole Stand Instruction Manual
- June 12, 2024
- compulocks
Table of Contents
compulocks TCDP04209IPDSB Rise Pole Stand
Product Information
The Rise Pole Stand is available in two models: Rise Pole Stand 10 and Rise Pole Stand 20. It comes in four different SKUs: TCDP04, TCDP04W, TCDP01, and TCDP01W. The product is designed to securely hold a tablet enclosure for various applications. It can be installed on a counter top or below the counter.
Assembly Instructions (Installation On Counter Top)
- Counter Mounting Pattern:
- 25.40mm (1.50 in)
- If wiring through the counter, use a 23.80mm (0.94 in) hole
- 67.31mm (2.65 in) B.C.
- 4X 5.6mm (0.219 in, 7/32 in) screws
- Wire Pass Thru from Enclosure:
- Wire Inlet
- If mounting to a monitor, remove M4 press-in nuts
- Install your tablet enclosure using M4 screws provided with the enclosure
- Wire Outlet
- Accessories:
- Hardware Kit
- Fixed Pole Stand
- 3.28″ (83.32mm) diameter cover
- Adhesive Base
- Single Add On Bracket
Assembly Instructions (Installation Below Counter)
- Bottom View of Counter:
- Remove 100mm plate and cover plate
- 44.50mm (1.75 in)
- 67.31mm (2.65 in) B.C.
- 23.80mm (0.94 in)
- 4X 5.6mm (0.219 in, 7/32 in) screws
- Reinstall 100mm plate and adjust tilt tension
- Counter screws should be shorter than counter depth
Space Assembly Instructions
©Compulocks Brands Inc. All Rights Reserved.
For more information, visit www.compulocks.com, contact [email protected], or call +1 800-948-0344.
References
Read User Manual Online (PDF format)
Loading......