PYLE PMAX4 Wireless BT Streaming Mini Line Mixer User Guide
- June 12, 2024
- Pyle
Table of Contents
PYLE PMAX4 Wireless BT Streaming Mini Line Mixer
Product Information
This device is designed to comply with part 15 of the FCC Rules, ensuring that it operates within the specified limits for electromagnetic interference. It also meets the FCC radiation exposure limits for an uncontrolled environment.
Product Usage Instructions
- Caution: Any changes or modifications made to this device that are not explicitly approved by the manufacturer may void your authority to operate the equipment.
- To ensure compliance with FCC regulations, it is important to maintain a minimum distance of 0cm between the radiator of the device and your body during installation and operation.
- Make sure the device is placed in an unobstructed area, away from any potential sources of interference.
- Connect the device to a power source using the provided power cord or adapter.
- Follow the manufacturer’s instructions for turning on and setting up the device.
- If you experience any interference while using the device, try repositioning it or adjusting its settings to minimize the interference.
- If you have any questions or concerns regarding the operation of this device, refer to the user manual or contact the manufacturer for assistance.
Please note that these instructions are a general guide. For specific details on operating and using this device, refer to the complete user manual provided by the manufacturer.
Please read this manual thoroughly, and retain it for future reference.
GENERAL SPECIFICATIONS
Features
- Flexible Stereo/Mono Switching Inputs
- Ultra-low Noise Design with High Headroom
- Built-in USB Sound Card, for Computer Playing & Recording
- Input level Control for Each Channel
- DC SV Power Supply, or PC Power Supply
- Rugged Metal Chassis and Compact Size
Bluetooth Connectivity
- Instantly Receives Wireless Music Streaming Audio
- Works with All of Your Favorite Devices (iPhone, Android, Smartphones, iPad, Tablet, MP3 Player, etc.)
- Bluetooth Version: 5.0
- Bluetooth Network Name: ‘KAM-8T’
- Bluetooth Wireless Range: 50′ Feet
What’s In the Box
- Mixer
- (2 Flat Plug) Power Adapter
- USB Cable
Technical Specs
- Power Input: DC SV, 1 A
- Voltage: 100-240V
- USB Sound Card: 2.0 Type-C
- Frequency Response: 20Hz-20KHz
- Total Harmonic Distortion: <0.5%@+4dBu
| MODEL | PMAX4 | PMAX6 | PMAXB |
|---|---|---|---|
| Power Consumption | 2W | 3W | 4W |
Product Dimension
(LxWxH)
| 4.4″x 3.3″x 1.8″-in.| 5.9″x 3.3″x 1.5″-in.| 4.6″x 5″x 2.4″in.
SOCKET LIST (PIN ARRANGEMENT)
CONNECTION
CONTROLS & FUNCTIONS
- [LEVEL] Controller: Control the input level of each channel, adjust to balance the volume.
- [STEREO/MONO] Converting switch for 6.35 input signals:
- Press down for MONO, bounce up for STEREO.
- [OUTPUT] Controller: Adjust the volume of main out.
- Note: Excessive high volume output may damage the output operation equipment (such as speakers, headphones, etc.).
- Please turn the output controller to zero or an appropriate volume position before turning on the device.
- [1-8 CHANNEL OUTPUT MIX L-R] Button: Press it to mix the audio output of 1-8 inputs, at this point NB output audio synchronization.
- Note: Please turn the NB output knob to the minimum output volume before pressing this mixing button.
- [BT/USB] Converting switch: When it is bounced up, the input signal is from Bluetooth. Press it down, the input signal is from USB.
- Power and Bluetooth indicator: It will light up when the mixer’s power is on.
- It will flash when connecting Bluetooth. After the Bluetooth is connected, the flashing speed will slow down.
- 6.35 Input jack: Connect signal sources with line level to this mono or twochannel input. If the volume of the signal source is adjusted too high, the input end of the corresponding channel may be distorted.
- 6.35 Output jack: For transmitting output signal.
- Type-C terminal: For data transferring, recording and power supply.
- When connected to a computer, it supplies power to the mixer, and audio data can be sent between mixer and computer. Supports stereo play and record with 24 Bit, 48kHz sampling rate. When using as a power socket or power bank for power supply, it must meet the following requirements:
- Output voltage: 4.8V to 5.2V
- Output current: 1 A or even more
- [GND] Connection: When connecting multiple devices, please connect the ground wire of each device shell to each other, which can reduce the bottom interference noise and increase the safety of use.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.