zelmer ZIS5400 Aqua Steam User Manual

zelmer ZIS5400 Aqua Steam

Product Information

• Product Name : ZIS5400 Aqua Steam
• Product Type : Steam Station
• Manufacturer : Unknown
• Model Number: ZIS5400
• Power Source: Corded Electric
• Weight: Not specified
• Dimensions : Not specified
• Warranty: Not specified

Product Usage Instructions

1. Before using the steam generator, read the user manual carefully and ensure that you understand the construction and functions of the device.
2. Remove all packaging materials and labels before using the device for the first time.
3. If there are any odors or vapors released from the device during the first use, do not spray steam directly on clothes as there may be impurities on the soleplate.
4. The device is designed for use at a maximum altitude of 2000 meters above sea level.
5. Water Filling: –
6. Fill the water tank
7. through the water inlet cover (1).
8. Do not fill above the MAX level indicator.
9. Ensure that the device is properly aligned when placing it back on the station.

Operation:

• Cotton/Linen Steaming:
• Hold the iron over a container of water and press and hold the steam button (3) until water stops flowing from the soleplate (11).

Maintenance and Cleaning:

• Unplug the power cord (8) and gently glide the soleplate (1) over a cloth to remove water stains.
• Empty any remaining water from the water tank. – Allow the steam generator to cool down before storing. 7.

Troubleshooting

• Problem: The generator does not produce steam. –
  Solution: Fill the water tank to the MAX water level mark. Press and hold the steam button to activate steam production.

• Problem: Strange pumping noise coming from the device. –
  Solution: Fill the water tank and press the steam button to reduce the noise and allow steam to be produced.

• Problem: Water dripping from the soleplate.
  Solution: Wipe the base and soleplate dry. Perform the descaling process.

• Problem: Dirty water and contaminants coming out of the soleplate.
  Solution: Repeat the descaling process. –

• Problem: The iron leaves bright spots or marks on clothes.
  Solution: These spots will disappear after washing. Place a cotton cloth on the ironing area to prevent any marks.

• Problem: Insufficient felt/sponge in the ironing board cover.
  Solution: Add an additional layer of felt/sponge under the ironing board cover. Please note that the product information provided is based on the given text extract from the user manual and some details may be missing or incomplete. It is recommended to refer to the complete user manual for accurate and detailed instructions on productusage

WE WOULD LIKE TO THANK YOU FOR CHOOSING UFESA. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

1. Water inlet cover
2. Water tank
3. Steam trigger/cleaning button
4. Heating indicator
5. Temperature adjustment knob
6. Iron lock
7. Steam hose
8. Power cord
9. Power cord storage
10. Power button
11. Soleplate

SAFETY INSTRUCTIONS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• The iron must not be left unattended while it is conncted to the supply mains.

• The plug must be removed from the socketoutlet before the water reservoir is filled with water.

• The iron must be used and rested on a flat, stable sur- face. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

• Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or coo- ling down.

• Instruction for the safe refilling of the water reser- voir are given in filling the water tank section.
  CAUTION. Hot surfaces. Surfaces are liable to get hot during use.

• Before connecting the appliance to the mains, put the iron in the unlocked position. To block the iron, wait until the appliance has cooled down completely and has been unplugged from the mains.

• This device is designed for use at a maximum altitude up to 2000m above sea level.

IMPORTANT WARNINGS

• This appliance is designed for home use and should never be used for commercial or industrial use under any circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void.
• Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.
• If you use one adaptor make sure it can reach 16 A and is provided with earth socket.
• The mains connection cable must not be tangled or wrapped around the product during use. Do not use the device, or connect and disconnect to supply mains with the hands and / or feet wet.
• Do not pull on the connection cord in order to unplug it or use it as a handle Do not direct steam at people and animals.
• Do not place the appliance under the tap to fill the water tank, or immerse it in water or other liquids.
• Unplug the product immediately from the mains in the event of any breakdown or damage and contact an Official Technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from
• the brand´s Official Technical support service may carry out repairs or procedures on the device.
• Proceed according to the conservation and cleaning section of this manual for cleaning.
• B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

BEFORE THE FIRST USE

• Before using the Steam Station, please ensure you read the user manual and understand all parts and features of the Steam Station. Be sure to remove any packaging material and labels before using for the first time.
• In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and there may be traces of dirt on the soleplate.

WATER TO BE USED

• The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your water supplier to determine the type of water in your area.
• Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.

FILLING THE WATER TANK

• Fill it through the water inlet cover. Do NOT fill over the MAX level indicator. Make sure when placing it back to the station that it fits correctly.

OPERATING INSTRUCTIONS

• NB: If it is the first time you have steam-ironed or if the product has not been used for some time, turn the temperature control to Max position and press the steam button continuously until steam comes out. This process can take a few minutes.

• Place the Steam Station on a firm level table, bench or ironing board. Plug the unit into a power outlet and switch on at the power point.

• Adjust the temperature dial in terms of choose the kind of fabrics that you want to iron. Note: If you want to use the steam ironing, we suggest you to adjust the temperature dial on MAX. When the iron operating light indicator goes out the  device will be ready for use.
  Note: During the whole operating time, the iron operating light indicator will go on and off in erratic intervals, this is normal.

• To make the steam jet come out, press the steam trigger, and if you want to stop the steam release the steam trigger, in a few seconds steam will stop.

• Pressing and holding the steam button, the steam can jet out from the iron soleplate. The steam can be switched off at any time by releasing the steam button.

IRONING TIPS

• Start with the fabrics to be ironed at a low temperature and finish with those that need higher temperatures.
• For mixed fibre fabric, set the ironing temperature to a lower setting.
• For woollen garments, press the steam trigger repeatedly over the garment without physically touching it with the iron.
• For thicker fabrics, raise the iron temperature at MAX position.

IRONING GUIDE CHART
Below is a guide on the temperature setting required for different types of fabric, along with the recommended iron method.

polypropylene
•                          • (2 dots)| Cupro, polyester, silk, triacetate, viscose, wool
••• (3 dots) / MAX| Cotton / Linen

VERTICAL STEAM IRONING
This feature allows you to smooth out creases in garments or drapery in a similar manner to a garment steamer. The high steam pressure of the Steam Station can provide bursts of steam while holding the iron vertically. For best results, utilise on delicate or light fabrics. Only direct steam at hanging garments in a safe area and ensure you always refer to gar- ment manufacturer recommendations.
WARNING : Do NOT direct the steam onto a garment that is being worn or at any person.

MAINTENANCE AND CLEANING

Iron lock
The easy carry locker attached to the base unit can be used to transport the steam Station with ease. To do so, lift it in an upward motion until it clicks into position. Before using the Steam Station, the easy carry handle must be locked back into position against the base unit; press and hold the handle release button and carefully lower it back to place.

Cleaning

• Turn off the Steam Station and unplug at the power outlet. Empty the water tank.
• Regularly clean the ceramic soleplate with a damp, non-metallic washing pad. Wipe the exterior of the Steam Station with a soft cloth.
• Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.

Descaling process
Proceed as follows:

1. Please prepare a water container.
2. Make sure that the plug of the product has been unplugged.
3. Fill the water tank to the maximum water level (MAX). Note: Do not pour vinegar or other descaling agents into the water tank.
4. Insert the pump steam station plug into the socket, and the steam control knob has been adjusted to the first point, wait for the heating indicator light to go out.
5. Hold the iron on top of the water container, press and hold the steam button until no scale is flushed out from the bottom of the iron.
6. Turn the steam control knob back to the third point, until there is no water and steam rus- hing out from the bottom of the iron.
7. Unplug the power plug of the iron, and move the iron gently on a cloth to remove the resi- dual water stains on the soleplate.
8. Pour out the remaining water in the water tank.
9. Let the iron cool down and store it.

TROUBLESHOOTING GUIDE

tank to the MAX water level mark. Press and hold the steam switch until the steam comes out. It may take 30 seconds to spray out steam
You didn’t press the steam switch| Tap the steam switch to turn on the steam function.
The product makes a loud pum- ping sound| No water in the water tank| Fill the water tank with water and press the steam switch until the sound of pumping water becomes smaller and the bottom plate emits steam
Water droplets from the sole- plate| After the descaling process is over, the remaining water can drip from the bottom plate| Wipe the bottom plate dry with a cloth. Please perform the descaling process (see “Maintenance and Cleaning”)
The descaling process has not been completed| You must perform the descaling process again (see “Maintenance and Cleaning”)
Dirty water and impurities will emerge from the soleplate| Impurities or chemicals in the water deposit on the steam outlet and/or soleplate| Perform the descaling process regularly
The iron leaves bright spots on clothing or imprint| The ironing surface is uneven, for example, because you are ironing where the clothes are stitched or folded| Bright spots or imprints will not per- sist; they will disappear after the clothes are washed. Avoid ironing seams or folds, or you can put a cotton cloth on the ironing area to avoid imprints
Insufficient felt in the ironing board cover| Add a layer of felt pad under the ironing board cover
The ironing board cover gets wet or water droplets appear on the floor/clothing| After a long ironing operation, steam will condense on the ironing board cover| If the foam or felt pad is damaged, replace the ironing board cover. You can also add a layer of felt pad under the ironing board cover to prevent condensation on the ironing board
The ironing board is not sui- table for the strong steam of the product| Add a layer of felt pad under the ironing board cover to prevent con- densation on the ironing board

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection center closest to your home.

WARRANTY REPORT

B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY
Customers must contact a TRENDS, S.L. authorised Technical Service for repair of the product Since any tampering of the same by anyone not authorised by TRENDS, S.L., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com

References

• Zelmer - Zelmer's official website
• Zelmer - Oficjalna strona marki Zelmer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>