CORNING E62-M3 MID Power 2T2R Digital Radio Owner’s Manual

: June 12, 2024
: Corning

Table of Contents

CORNING E62-M3 MID Power 2T2R Digital Radio
Product Information
Product Usage Instructions
Overview
Key Features
Block Diagram
Technical Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CORNING E62-M3 MID Power 2T2R Digital Radio

CORNING-E62-M3-MID-Power-2T2R-Digital-Radio-product

Product Information

Product Name: E62-M3

Power: Mid Power

Radio: 2T2R Digital Radio

Output Power: Up to 40dBm

Supported Band: B41

Product Usage Instructions

1. Ensure that the device is compliant with Part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received.

2. Install and operate the device with a minimum distance of 80cm between the radiator and your body to comply with FCC radiation exposure limits.

3. Make sure the socket-outlet is easily accessible.

4. Connect the A3 Access Unit, E3-O Optical Expansion Unit, and M3 Mid Power Remote Unit as per the supported configurations.

5. The E62-M3 is a digital transport platform designed for B41 operation using the CPRI protocol over fiber optic cable.

6. The power amplifier technology used in this platform is Digital Pre- Distortion, which improves power consumption compared to analogue technology.

7. The E62-M3 supports multi-operator multiband deployments of cellular services.

8. Key Features:

Supports 2T2R Digital Radio
Supports Full band41 SISO Single Fiber Link
Up to 40dBm Output Power
Supports External Alarm
5GNR Compliant

9. The system supports various configurations and has the following technical specifications:

Maximum RF Bands per Access Unit: 4
Maximum RF Bands per Remote Unit: 1
Maximum Access Units per System: 3 (1 x Primary A3 / 2 x Secondary A3)
Maximum E3s per Primary A3: 8
Maximum M3RUs per E3: 14
Maximum Cascaded Level: 6
Maximum IBW Band Selective Mode: 200MHz (280M by firmware upgrade)
Channel Selective Mode: 100MHz, @1MHz step
Fiber transmission Capacity: LTE: 5/10/15/20 MHz NR: 5/10/15/20/30/40/50/60/70/80/90/100 MHz
Filter Bandwidth Basic Units Occupied: 48 Basic Units
M3RU DSP Capacity: 25M
Filter Bandwidth DSP Units occupied: 25
Maximum Carriers Supported per Band: N/A
System Delay Adjustment System Delay (A3+E3+M3): N/A
VSWR Supported Configurations: Configuration B41 MIMO

Revision History

Revision Number	Revision Date	Summary of Changes	Author
1.0.0

Copyright © 2023 Sunwave All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from Sunwave.
All copyright, confidential information, patents, design rights and all other intellectual property rights of whatsoever nature contained herein are and shall remain the sole and exclusive property of Sunwave. The information furnished herein is believed to be accurate and reliable.
However, no responsibility is assumed by Sunwave for its use, or for any infringements of patents or other rights of third parties resulting from its use.
The Sunwave and CrossFire names and logos are trademarks or registered trademarks of Sunwave.
All other trademarks are the property of their respective owners.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 80cm between the radiator & your body.
The socket-outlet shall be easily accessible.

Overview

Everon E62-M3 is a digital transport platform dedicated for B41 operation supporting cellular technologies on fiber optic cable using the CPRI protocol. The power amplifier technology adopts Digital Pre-Distortion, allowing for a significant improvement in power consumption compared with analogue technology. This platform is ideal for multi-operator multi-band deployments of cellular services.

Key Features

2T2R Digital Radio
Support Full band41 SISO
Single Fiber Link
Up to 40dBm Output Power
Supports External Alarm
5GNR Compliant

System Elements

M3
Mid Power
Remote Unit

Block Diagram

CORNING-E62-M3-MID-Power-2T2R-Digital-Radio-fig
2

Technical Specifications

System| | | |
---|---|---|---|---
Maximum RF Bands per Access Unit| 4| | |
Maximum RF Bands per Remote Unit| 1| | |
Maximum Access Units per System| 3 (1 x Primary A3 / 2 x Secondary A3)| |
Maximum E3s per Primary A3| 8| | |
Maximum M3RUs per E3| 14| | |
Maximum Cascaded Level| 6| | |
Maximum IBW| 200MHz, (280M by firmware upgrade)| |
Band Selective Mode| ≤100MHz, @1MHz step| |
Channel Selective Mode| LTE: 5/10/15/20 MHz

NR: 5/10/15/20/30/40/50/60/70/80/90/100 MHz

|
Fiber transmission Capacity| 48 Basic Units| | |
Filter Bandwidth| ≤25M| 25<BW≤50M| 50<BW≤75M| 75<BW≤100M
Basic Units Occupied| 1| 2| 3| 4
M3RU DSP Capacity| 12 DSP Units per Band| |
Filter Bandwidth| ≤25M| 25<BW≤50M| 50<BW≤75M| 75<BW≤100M
DSP Units occupied| 1| 2| 4| 4
Maximum Carriers Supported per Band| 4| | |
System Delay Adjustment| Up to 80.00µs| | |
System Delay (A3+E3+M3)| 12µS| | |
VSWR| <1.6| | |
Supported Configurations

Configuration| CH1| CH2
B41 MIMO| 2496-2690M| 2496-2690M
B41 SISO| 2496-2690M| NC
---|---|---
Forward Path (Downlink)|
---|---
Output Power per Band| 39 ± 2dBm for B41
Maximum Gain| 39 ± 3dB for B41
Maximum Input Power| +15dBm (with AGC operating) / 0dBm (without AGC operating)
EVM| <3.5% @ 256 QAM
Manual Attenuation Control| 35dB @ 1dB/step (A3: 20dB, M3: 15dB)
Reverse Path (Uplink)|
---|---
Output Power per Band| -11 ± 2dBm for B41
Maximum Gain| 39 ± 3dB for B41
Maximum Input Power| -35dBm
Manual Gain Control| 35dB @ 1dB/step (AU: 20dB, M3: 15dB)
Noise Figure| 6dB@max Gain
IIP3| -22dBm
Interfaces|
---|---
M3 Antenna Interface| 4.3-10 Female
M3 RF coupling port| QMA Female
A3 RF Interface| QMA Female
Optical Connector Type| SFP28, Standard LC
Optical Transmission Rate| 24.33024 Gb/s
Optical Fibre Length| 10km
Physical Alarms| RJ45 (2x in, 2x out)
Maintenance Interface| Ethernet RJ45
Electrical|
---|---
Complies with| 3GPP TS36.106 | 3GPP TS25.106
EMC| EN 301489-1 / -50, FCC 47 CFR 1.1307(b), FCC 47 CFR 1.310
Safety| EN 62368-1
Maximum Power Consumption (A3/E3/M3)| 60W / 40W / 200W
Power Supply| 100-240V AC, 50/60Hz | 48VDC ± 20%
Environmental|
---|---
Mean Time Between Failure (MTBF)| >220,000 hours
Operating Temperature (A3/E3)| -10°C to +50°C / 14°F to +122°F
Operating Temperature (M3)| -40°C to +55°C / -40°F to +131°F
Humidity| 0% to 90% (Non-Condensing)
Cooling| Convection
Installation| A3/E3: Wall or 19” Rack | M3: Wall, Pole, 19” Rack
Mechanical|
---|---
A3 (Width / Height / Depth / Weight) With package| 440mm / 88mm / 329mm / 6.5kg, 17.32in / 3.46in / 12.95in / 14.33lb 555mm / 140mm / 535mm / 8.0kg, 21.85in / 7.09in / 21.06in / 17.64lb
E3 (Width / Height / Depth / Weight)