CHARGER Water IronBreaker III Water Treatment System with WS1 User Manual

Programming Manual
for IronBreaker III with WS1
10” x 54” Systems

IronBreaker III Water Treatment System with WS1

1. From the time of day screen, press and hold the NEXT and down arrow buttons until the display changes.
2. Push the up arrow until you get to IRON FILTER and press NEXT.
3. Set the First Backwash to 10 minutes. Press NEXT.
4. Set Rinse for 8 minutes. Press NEXT .
5. Set the Brine Draw to 40 minutes. Press NEXT.
6. Set the Second Backwash to OFF. Press NEXT.
7. Set the Pounds of Salt to OFF. Press NEXT.
8. If metered valve, set the Capacity to 5.0×1000. Press NEXT.
9. Set the Regen to OFF. Press NEXT.
10. Set the Relay to OFF. Press NEXT.
11. The Call setting can either be ignored or set to your preference. This setting will display CALL on the valve after a time period of your choosing to prompt the user to call for service. Press NEXT once you’ve got this set to your preference.
12. You should be at the time-of-day screen again. Press and hold the NEXT and up buttons until the display changes.
13. Set the Day Override to 3 DAYS. Press NEXT.
14. Set the Time of Regen to 12:30 AM. Press NEXT.
15. Set the Time of Day and the system is ready.

Charger Water Treatment Products
8150 N. Lehigh Ave, Morton Grove, IL 60053
www.chargerwater.com/FAQ
IBWS1MANUAL

Documents / Resources

| CHARGER Water IronBreaker III Water Treatment System with WS1 [pdf] User Manual
10 x 54 Systems, IronBreaker III Water Treatment System with WS1, IronBreaker III, Water Treatment System with WS1
---|---

References

• FAQ - Wholesale Water Treatment Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>