merit Technologies PS2 Wireless Joystick Instructions
- June 12, 2024
- merit Technologies
Table of Contents
merit Technologies PS2 Wireless Joystick
PS2 Wireless Joystick
The PS2 Wireless Joystick is a gaming controller that allows you to play
games on your PlayStation 2 wirelessly. It provides a convenient and
comfortable gaming experience.
Transmitter **
**
The transmitter is the main control unit of the PS2 Wireless Joystick. It has several functions and features:
- Power on: To power on the joystick, press and hold the START key for more than 2 seconds.
- Power off: To power off the joystick, press and hold the START key for more than 3 seconds.
- Bind Mode: During normal operation, you can enter the bind mode by pressing and holding the L3 key for more than 2 seconds.
- Neutral point correction: To calibrate the neutral point of the joystick, press and hold the L1 and R1 keys simultaneously, and then power on the joystick for more than 2 seconds. The LED will flash twice to indicate the completion of the calibration.
- LED indication: The LED on the joystick provides various indications:
- a. Normal emission & Analog Mode (Default) – LED remains constantly bright.
- b. Normal emission & Digital Mode – LED flashes for 0.5 seconds ON, then OFF continuously.
- c. Low battery voltage warning – LED flashes for 0.25 seconds ON and OFF continuously.
- d. Bind Mode – The LED flashes for 0.1 seconds ON and OFF for 3 consecutive seconds before returning to normal operating mode.
- e. Neutral point correction – The LED flashes for 0.15 seconds ON, 0.15 seconds OFF, 0.15 seconds ON, and 0.15 seconds OFF before returning to normal working mode.
- f. Sleep mode – If the joystick is not operated for more than 15 minutes, the LED flashes for 1 second and then remains ON and OFF continuously. It returns to normal working mode once any function is activated. After each function has not been operated for more than 15 minutes, the LED flashes for 1 second and remains ON and OFF continuously. After the function is activated, it returns to normal working mode.
FCC Statement **
**
This equipment complies with FCC radiation exposure limits for an uncontrolled
environment. To ensure compliance with FCC exposure requirements, please
follow the operation instructions provided in this manual. Any changes or
modifications not approved by the responsible party could void the user’s
authority to operate the equipment.
The equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment