Lepro AI Bulb BR1 Smart LED Bulb User Manual
- June 12, 2024
- Lepro
Table of Contents
AI Bulb BR1 Smart LED Bulb
User Manual
AI Bulb BR1 Smart LED Bulb
- Turn on the phone’s Bluetooth and connect to the WiFi network.
- Install the light
- Follow the on-screen steps to finish set up.
Voice Control
If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.
How to reset your light.
Switch the light off and on four times (with a 2-second interval between each).
| Operation frequency range | 2412MHz-2462MHz(WiFi) 2402MHz-2480MHz(Bluetooth) |
|---|---|
| Modulation type | DSSS(DBPSK/DQPSK/CCK); OFDM(BPSK/CPSK/16QAM/640AM) GFSK |
| Maximum transmit power | 18 dBm |
| Antenna Type | PCB Antenna |
Does not support manual dimmer.
ISEDC Warning
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard (s). Operation is subject to the following two
conditions:
- This device may not cause interference, and
- This device must accept any interference,including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth
for an uncontrolled environment This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.This equipment
should be installed and operated with minimum distance 20cm between the
radiator& your body.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment . This transmitter must not be co – located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the
radiator& your body.
This product is subject to the provisions of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol. Products identified with
this symbol may not be discarded with normal household waste, but must be
taken to a collection point for recycling electric and electronic appliances.
This recycling symbol marks e.g. an object or parts of the material as
valuable for recycling. Recycling helps to reduce the consumption of raw
materials and protect the environment.
LEPRO INNOVATION INC
3651 Lindell Road Suite D1048, Las Vegas, NV 89103, USA
www.lepro.com
+1 866-287-2558
cs@lepro.com
Le Ming Trading Inc.
801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA
www.lepro.ca
+1 833-433-1453
cs@lepro.ca
Made in China
CAN ICES-005 (B) / NMB-005 (B)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>