Apps Miracles.Star App User Manual

Apps Miracles.Star App

Product Information
This product is a lamp that requires a USB power supply. It comes with a bracket to fix the lamp in place. The lamp can be connected to a power source using the USB cable provided. The power source can be a computer, mobile phone charger, power bank, USB socket, or any other device with a USB interface. Once the lamp is turned on and connected to the power supply, it
will emit light. The default setting is a 7-color cycle change.

There are three control modes available for this product:

1. Button on the lamp: Press once to switch between different luminous modes. Press and hold for 3 seconds to turn the lamp on or off.
2. Remote control: Use the infrared remote control to press the required function key and control the lamp.
3. App control: Download the App on your mobile phone, turn on the Bluetooth function, and search for “miracles star” to connect to the lamp. The App allows you to control multiple lights simultaneously.

Please note that different packaging boxes may include remote controllers of different sizes. In the App, you can adjust the color sequence if the controlled color is different from the actual color. The default sequence is usually RGB (Red, Green, Blue).

For multiple lights to change color synchronously, follow these steps:

1. In the color-matching interface, click on the “LED Quantity” setting and enter 24 for the desktop model (50CM) or enter 60 for the floor lamp model (110CM).
2. Confirm the settings to enable color synchronization.

In the mode interface, you can choose from dozens of luminous colors and dynamics. The speed and brightness can also be adjusted to your preference. In microphone mode, the lamp can change color according to the rhythm of ambient sound. You can also select different modes and adjust the sensitivity.

Product Usage Instructions
To use this product:

1. Scan the provided code and download the App on your mobile phone.
2. Ensure that the lamp is connected to a power supply using the USB cable.
3. Turn on the lamp by pressing the button on the lamp for 3 seconds or using the remote control.
4. If using the App control, turn on the Bluetooth function on your mobile phone and search for “miracles star” to connect to the lamp.
5. Adjust the color sequence in the App if needed.
6. In the color-matching interface, set the LED Quantity to 24 for the desktop model (50CM) or 60 for the floor lamp model (110CM), then confirm the settings for color synchronization.
7. In the mode interface, choose your desired luminous color, dynamics, speed, and brightness.
8. In microphone mode, select the desired mode and adjust the sensitivity.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer may void your authority to operate this equipment.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of between the radiator and your body.

Scan the code and download the App

Instructions

This product uses a USB power supply. After turning on the bracket and fixing the lamp, you can connect the USB cable to the power supply with a USB interface (such as a computer, mobile phone charger, Power Bank, USB socket, etc.). After powering on, the light will be on, and the default is 7 color cycle change color.

Three Control modes:

1. Button on the lamp: press once to switch a luminous mode, and press for 3 seconds to turn it on or off.
2. remote control: use the infrared remote control to press the required function key to control the lamp.

Different sizes of remote controllers may be provided according to different packaging boxes.

3 App control
after downloading the App from the mobile phone, turn on the Bluetooth function of the mobile phone and turn on miracles star.

• 0 / 1 in the upper left corner is the Bluetooth connection, 0 is not connected and can be connected manually. 1 is already connected. It can be connected to control multiple lights at the same time.
• The hexagonal symbol in the upper right corner is the debugging color sequence, usually RGB. If the color controlled is different from the actual, you can change other sequences.
• In the color matching interface, click the LED Quantity setting, enter 24 and confirm the desktop model(50CM), and enter 60 and confirm the floor lamp model(110CM). The above steps are necessary for multiple lights to change color synchronously
• In the mode interface: there are dozens of luminous colors and dynamics for you to choose from, and the speed and brightness can also be adjusted.

In microphone mode: you can change color according to the rhythm of ambient sound, and also select different modes and sensitivity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>