onn 100094794 Wireless Bone Conduction Headphones User Guide
- June 12, 2024
- Onn
Table of Contents
Wireless Bone Conduction Headphones
Quick Start Guide
Get to Know your Headphones
- Model: 100094794
- Speakers: Bone Conduction vibrational speaker drivers x2
- 8 hours of total playtime
- 1P67 waterproof rating
- Magnetic connector to USB charging cable: 400mm(minimum)
What’s in the Box?
Check to make sure you have everything below
- Wireless Bone Conduction Headphones x1
- Charging Cable With Magnetic Connection x1
- Quick Start Guide x1
- Storage pouch x 1
Let’s Get Started!
Power On
Press and hold power button for 2s until you hear ”power on”.
Power off
Press and hold power button for 2s until you hear ”power off”. Pairing
- Connect to your device through Bluetooth wireless technology, search for the entry ” onn. Bone Conduction “.
- Multipoint connection: Press and hold “volume up” and “volume down” buttons together for 1s to entry pairing model.
Enjoy your Music
Play/Pause
x1 Press power button Siri/Voice Assistant
x2 Press power button
Previous song
Press and hold Volume down
x1 Press
Next song
Press and hold
Volume up
x1 Press
Take a clear Phone call
Answer a call
x1 Press power button
Hang up a call
x1 Press power button
Reject a call
x2 Press power button
Charge your Headphones
Connect USB-A to 5V power adapter. Use the in-box cable to charge
headphone’s
The LED indicator will be
red when charging. The LED indicator will be green when fully charged.
The Fine Print
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
Warning:
Changes or modifications to this unit not espressly approved by the party
responsible for compliance could void the user´s authority to operate the
equipment.
Need help? We’re here for you every day from 7 a.m.-9 p.m. CST. Give us a call
at 1-888-516-2630.
Produced for Walmart Inc.,
Bentonville, AR 72716
Ver.01 12/18/22
FCC ID : 2ALVK-ONN94794
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly worn on the head.
We’d love to hear from you. Scan with your Walmart app and let us know what you think.
366
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>