YOUNGSTAR DS868 Karaoke Microphone Speaker Instruction Manual

YOUNGSTAR DS868 Karaoke Microphone Speaker

Karaoke Microphone Speaker

Basic Button Operation

1. Long Press : ON/OFF Short Press: BT/FM/AUX-IN

2. ▲
   Short Press : the previous song

3. ▼
   Short Press : the next song long press: Take photo(under Bluetooth connected)

4. Short Press : Play/Pause

5. Short Press : original sound/accompany sound Press Twice: LED light on/off
   (when LED light on, the color change automatically with the music) Long Press : Magic Sounds (Four magic sounds optional)

6. “VOL+”
   Increase music volume

7. “VOL – ”
   Decrease music volume

8. “MIC + ” and “MIC – ”
   Gradually push to adjust the sound of mi

9. REMIX
   Gradually push to make your voice better

WIRELESS KARAOKE

1. Turn on the power: long-press the button to turn on
2. Bluetooth connection: Turn on the mobile phone’s Bluetooth, search for the device name “0S868”, click to pair and connect, the travel tone indicates that the connection is successful.
3. Turn on the music on your phones or pads,(Don’t need to download a special APP, just use some normal audio software, such as Spotify, iTunes, YouTube etc … )
4. 0pen the Karaoke software with recording function on the mobile phone, record the song according to the instructions of music software, then select your favorite songs and start singing.
5. Start Karaoke song ,you can adjust some settings according to the basic button operation.

MOBILE PHONE RECORDING

1. After your phone is paired with the Bluetooth name”DS868″
2. Open the karaoke song software on the mobile phone. Most music apps and karaoke music apps are supported. Choose your favorite song and use the above singing method to start recording the song.
3. Debug and keep the song: follow the instructions of the software on the app you are using.

SELFIE FUNCTION

1. Turn on the Bluetooth of the mobile phone, search for the device name “0S868” and dick connect.
2. Turn on the camera function of the phone, and long-press the button ▼ of the connected machine to take a photo or video .

Android system requires 4.2.2 or above, 1OS requires 6.0 or above, mobile phones and independent camera physical buttons are generally not supported.

BLUETOOTH SPEAKER FUNCTION

Plug the TF card with music and play music, the microphone can be used as a Bluetooth speaker.

LED FUNCTION

The lights change color automatically with the music, switching between red, blue, green and white color.
We also can close LED light by press twice “LED” button; Press twice again to open it.

TECHNICAL PARAMETERS

Model

| DS868| Battery Type| 18650 Li battery
---|---|---|---
Output power| 4 Ω 5W| Charge|

DC-5V

Frequency Range

| 100HZ-10KHZ| Reverberation| Sound effect
Battery Capacity| 1200mAh| Mode|

BT/FM/AUX-IN

FCC INSTRUCTIONS

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• ‐Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>