ALTEC LANSING IMW1020 HydraMicro Everythingproof Wireless Speaker User Manual

ALTEC LANSING IMW1020 HydraMicro Everythingproof Wireless Speaker

Product Information

HydraMicro Everythingproof TM Wireless Speaker IMW1021

Product Usage Instructions

Powering On/Bluetooth Pairing

1. Press and hold the Power Button for 1-2 seconds to power on the speaker.
2. The LED Indicator Light will start flashing blue, indicating that the speaker is in pairing mode.
3. Connect your Bluetooth-compatible device to the speaker by selecting “HydraMicro” from the available Bluetooth devices list.
4. Once paired, the LED Indicator Light will stay solid blue.

Battery Charging

1. Connect the provided USB-C Charging Cable to the charging port of the speaker.
2. Connect the other end of the cable to a USB power source.
3. While charging, the LED Indicator Light will be red.
4. When charging is complete, the LED Indicator Light will turn off.

Speaker Controls

• Play/Pause: Press the Play/Pause button to play or pause audio playback.
• Volume Up/Next Track: Press the + button to increase volume or skip to the next track.
• Volume Down/Previous Track: Press the – button to decrease volume or go back to the previous track.
• Answer & End Call: Press the button to answer an incoming call or end an ongoing call.
• Reject Incoming Call: Press and hold the button for 2 seconds to reject an incoming call.

True Wireless Pairing

To pair two speakers for true wireless stereo (TWS) playback:

1. Turn on the first speaker and connect it with a Bluetooth-compatible device.
2. The LED Indicator Light of the first speaker will start flashing green, indicating pairing mode.
3. Turn on the second speaker and press and hold both the + and – buttons for 1-2 seconds.
4. Press and hold the + and – buttons for 1-2 seconds on the first speaker.
5. The first speaker will now connect to the second speaker, and they will play in sync.
6. The Indicator LEDs on both speakers will illuminate green.
7. To end TWS playback, press and hold the power button on either speaker.

Answering Calls

To answer an incoming call:
Press the Answer & End Call button once to answer the call.

To end a call:
Press the Answer & End Call button again to end the ongoing call.

Voice Assistant / Reset

To activate Voice Assistant (Siri or Google Assistant) when connected to a phone:

Press the Volume Up and Volume Down buttons simultaneously twice.

To reset the speaker:

Disconnect Bluetooth: Press and hold the Volume Up and Volume
Down buttons for ten seconds, and the speaker will beep.

Reset All Connections: Press and hold the Volume Up and Volume Down buttons for ten seconds, and the speaker will power off. All pairing information is reset.

Note: The speaker is compatible with IMW1000 HydraMini, IMW1050 HydraOrbit, and IMW1100 HydraMotion.

Overall battery performance may vary depending on usage settings and environmental conditions.

REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty information and more please register your product at alteclansingsupport.com

WELCOME
Thank you for purchasing an Altec Lansing product.
It’s our goal to make sure you are happy. Share your happiness with our customer concierge.

JUST LISTEN

HydraMicro Everything proof™
Wireless Speaker
IMW1021
QUICK START GUIDE

In the Box

A Closer Look

Charging

Battery Warning:
When power is low, the light indicator will flash red 3 times.

Powering On/Bluetooth Pairing

Speaker Controls

True Wireless Pairing

• Turn on the first speaker and connect It with a Bluetooth-compatible device.
• Turn on the second speaker and press and hold its and buttons for 1-2 seconds.
• Press and hold the & buttons for 1-2 seconds on the first speaker. The first speaker will now connect to the second so they both play in sync.
  The Indicator LEDs will illuminate green.
  “To end TWS press & hold the power button on either speaker”

Using True Wireless Pairing, this speaker will also pair with IMW1000 HydraMini, IMW1050 HydraOrbit,and IMW1100 HydraMotion.

Voice Assistant / Reset

Press x2
To activate Voice Assistant (Siri or Google Assistant) when connected to phone.

Reset- Press & Hold Volume &

Disconnect Bluetooth: Press and hold for ten seconds and the speaker will beep
Reset All connections: Press and hold for ten seconds and the speaker will power off. All pairing information is reset.

Blue and red lights will flash from the light indicator while speaker resets.
Overall battery performance varies dependent upon use setting, and environmental conditions. For further information, please visit www.alteclansing.com

Answering Calls

Specifications

• Battery 3.7V/400mAh
• Charging Voltage 5V
• Charging Current 350mA
• Bluetooth version V5.0
• Bluetooth Range ≥10m or 33ft
• Waterproof Rating IPX7
• Charging Time Approx. 2 Hours
• Play Time Approx. 6 Hours

When volume is played at 50% or lower

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com

follow us
@alteclansingofficial

follow us
@alteclansing

follow us
@alteclansingofficial

12 Month Limited Warranty
All Altec Lansing products come with
12 month limited warrant from the date of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec
Lansing. If you need
assistance, please call us at 1.855.292.4087 or e-mail alsupport@sakar.com
www.alteclansing.com

IMPORTANT
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!
STOP
Call us 24/7 at 1-855-292-4087
E-mail us at support@alteclansing.com or visit us at alteclansing.com

References

• Altec Lansing | Top Speakers, Headphones, and Electronics Since 1927

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>