RAYMATE R12 Cyberpunk Hero Wireless Speaker
- June 12, 2024
- RAYMATE
Table of Contents
RAYMATE R12 Cyberpunk Hero Wireless Speaker
Button Configuration
How to Use
Wireless Connection
Raymate R12
How to Enter/Exit Stereo Pairing
- Turn on two speakers and make sure they haven’t connected with any device.
- Long Press once on either speaker(Host Speaker) to enter stereo pairing mode. The host and the vice speaker are blinking white light
- If paired successfully, the stereo pairing indicator of the host speaker will stay white while vice one will blink white
- Search & click ‘ Raymate R12’ to connect.
- Press ‘It once on either speaker to exit stereo pairing mode.
Thank you for purchasing the Raymate R12 Cyberpunk Hero Speaker. Please read the user manual before use and keep it handy for future reference. If you have any additional questions or comments, please feel free contact us.
Package Contents
1 x Cyberpunk Hero Speaker Speaker
1 × 3.5mm Audio Cable
1 x Type-C Charging Cable
1 × User Manual
USB-A Power Bank Function
This speaker carries a USB charge-out function that will automatically detect
your device and begin to charge it when the charging cable is plugged into the
USB-A port under powering-on mode.
Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio
jack cable.
Note: After plugging in an audio cable, the speaker will automatically switch
to Aux-in mode.
TF Card Slot Mode
The speaker will play the music from your TF/Micro SD card when plugging the
card into the slot.
USB Flash Drive Mode
The speaker will play the music from your U-disk when plugged into the slot.
Auto Power off
- There is no operation after startup, and it will automatically shut down in 30 minutes.
- When on low battery
- When the speaker is powered on and without any device connection After charging the device for 30 minutes, the speaker will also automatically power off.
Specifications
Care & Maintenance
- Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable.
- Do not disassemble this product. It contains no user-serviceable parts.
- Do not drop or jump on it and treat it with care for the best performance.
- Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept at an unfriendly place.
- Do not dispose of this product in a fire or the batteries may explode or leak.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Warning Statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.