eufy E340 Floodlight Camera User Guide

eufy E340 Floodlight Camera

Product Information

• Product Name: Floodlight Cam E340
• Manufacturer: Anker Innovations Limited
• Trademark: eufy Security
• Model: T8425
• Compatible microSD Card: Class 10 with a maximum of 128 GB

  ---

Product Usage Instructions:

1. Download and install the eufy Security app on your smartphone or tablet. If you don’t have an account, create one or sign in to your existing account.
2. Connect the floodlight camera to a power source using the provided USB-C charging cable and a 5V/1A USB power adapter. Make sure to close the USB port cover properly to prevent water from entering the camera.
3. Open the eufy Security app and tap on the “+” icon to add a new device. Follow the in-app instructions to complete the setup process.
4. If you want to store recordings, insert a microSD card (not provided) into the microSD card slot on the camera. Make sure to use a Class 10 microSD card with a maximum capacity of 128 GB.
5. Before installing the floodlight camera, ensure that you have shut off power at the breaker for the floodlight circuit. If you are unsure about this, consult with a licensed electrician.
6. Separate the mounting bracket from the camera and keep it aside for later installation.
7. Select a suitable location for mounting the camera. You can choose to mount it vertically on a wall or hang it from an overhang. Make sure to disconnect power at the fuse or circuit breaker before starting the installation process.
8. Always follow local code standards when installing wired connections. If you are outside of North America, it is recommended to have installation and wiring performed by a licensed electrician.
9. For overhang mounting, reinstall the mounting base first.
10. Mount the camera at a recommended height of 8 ft (2.44 m) above the ground to achieve up to 40 ft (12 m) of motion detection range.
11. Install the mounting bracket securely, following the provided instructions in the user manual.

Note: Do not use a dimmer switch or timer for this product. Please refer to the user manual for more detailed instructions and safety information.

SAFETY INSTRUCTIONS

•  This equipment is not suitable for use in locations where children are likely to be present. This equipment is not intended for use by children.
• Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
• User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will
  not be responsible for any violators’ legal liability under any circumstances.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED

• MIN 90°C SUPPLY CONDUCTORS

WHAT’S IN THE BOX

WHAT YOU NEED (Not Provided)

AT A GLANCE

1. Floodlight
2. Speaker
3. Motion Sensor Component
4. System Indicator
5. Telephoto Camera
6. Wide Angle Camera
7. Infrared Component
8. Power Input (For Quick Setup)
9. SYNC Button
10. microSD Card Slot
11. Insert a microSD card* (not provided) to store recordings
12. Mounting Bracket
13. Mounting Base

*Use at least a Class 10 microSD card with a maximum of 128 GB.

SETTING UP THE SYSTEM

1. Download and install the eufy Security app, then sign in or create an account.
2. Power on the floodlight camera by using the USB-C charging cable and a power adapter (5V/1A, not provided).
   • To avoid scratching the floodlight camera, do not peel off the protective film for the time being
   • The floodlights will only light up when in wired power mode. The USB-powered connection is used for setting up the camera safely inside your home.
   • Make sure you can stream video from your floodlight camera BEFORE INSTALLATION.
3. Tap + in the app and follow the in-app instructions to add the camera.
4. Disconnect from the power adapter, then close the USB port cover.

The USB port cover must be closed to prevent water from entering the floodlight camera.

PREPARING FOR INSTALLATION (IMPORTANT)

Check local laws for installation
If you are outside of North America, installation and wiring must be performed by a licensed electrician. Always follow code standards when installing wired connections.
Shut Power Off at the Breaker

Risk of Electrical Shock

•  Turn off the power at your circuit breaker or fuse box before continuing, consult with a licensed electrician if needed.
• Switch on/off the lights to make sure the electricity to the installation area is shut off.
• Verify that the power supply is a 100~240 VAC 50/60 Hz power source.
• Keep the breaker off at any time during the installation process.

NOTE: Do not use a dimmer switch or timer for this product.

INSTALLING YOUR FLOODLIGHT CAMERA

Separate the Mounting Bracket
Separate the mounting bracket from the camera and set it aside for later installation.

Select a Location
You can mount the floodlight camera vertically on a wall or hang it from a ceiling. With the power off at the breaker, remove the existing floodlight if you have one.

For overhang mounting, reinstall the mounting base first.

Recommended Height
We recommend mounting the camera 8 ft (2.44 m) above the ground to achieve up to 40 ft (12 m) of motion detection range.

Install the Mounting Bracket

1.  Run the existing wires through the hole of the junction box.
2.  Hold the mounting bracket onto the junction box, align the screw holes, remove the foam from the holes, then secure the mounting bracket on the wall or ceiling with the Bracket Screws (Bag C).

Wall Mounting

Overhang Mounting

Connect Wires

1. Hang your camera on the bracket with the provided hook while connecting the wires.
2. Separately connect the junction box’s ground wire (bare copper /green / green & yellow), live wire (black), and neutral wire (white) to the floodlight camera’s ground wire (green & yellow), live wire (black), and neutral wire (white) using wire connectors, then secure the connections with a screwdriver.
   • If the existing ground wire has been connected to the junction box, or if there is no ground wire, connect the floodlight camera’s ground wire directly to the junction box or mounting plate.

Never cross-connect. The wires must be connected with matching colors. If you have problems with the proper operation of the floodlight camera, consult a licensed technician.

Place the Camera on the Mounting Bracket

1. Remove the hook, snap the mounting base onto the mounting bracket, align the holes, and secure it with 2 Base Screws (Bag B).
2. Remove the label and protective film from the floodlight.

Clean the camera with a lens cleaning cloth.

ADJUSTING THE LIGHTING ANGLE

Manually pull up and down or left and right to adjust the floodlight vertically or horizontally.

RESTORING POWER

1. Switch on the main circuit breaker in the house. In case the floodlight camera is not powered on, switch off the circuit breaker before checking the wiring of the floodlight camera.
2. Now you can access various features and change settings in the eufy Security app.
   For troubleshooting, check the Help section in the eufy Security app.

LED LIGHT GUIDE

NOTICE

NOTICE (United States of America)

FCC Statement
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party

• Company Name: POWER MOBILE LIFE, LLC
• Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
• Telephone: 1-800-988-7973

IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
5150~5250 MHz can be used indoor only.
5150~5250 MHz

NOTICE
Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the device and accessories is -20°C to 40°C.
It is recommended to supply the device in an environment with a temperature that ranges from 5°C~25°C.
When supplying, please place the device in an environment that has a normal room temperature and good ventilation.

Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

Customer Service

12-month limited warranty
(US) +1 800-988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
( 中国 ) +86 400 0550 036
( 日本 ) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030

Email: [email protected]

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Facebook: @EufyOfficial
Twitter: @EufyOfficial
Instagram: @EufyOfficial

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>