milwaukee M18FCDDEXL-0 18V Li-Ion RedLithium Cordless SDS Compact Dust Extractor Instruction Manual
- June 12, 2024
- Milwaukee
Table of Contents
- M18FCDDEXL-0 18V Li-Ion RedLithium Cordless SDS Compact Dust Extractor
- TECHNICAL DATA
- ROTARY HAMMER SAFETY WARNINGS
- ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
- SPECIFIED CONDITIONS OF USE
- RESIDUAL RISK
- WORKING INSTRUCTIONS
- CLEANING
- MAINTENANCE
- SYMBOLS
- EC DECLARATION OF CONFORMITY
- Documents / Resources
Nothing but HEAVY DUTY®. M18 FCDDEXL
Original instructions
Picture section with operating description and functional description
M18FCDDEXL-0 18V Li-Ion RedLithium Cordless SDS Compact Dust Extractor
Cleaning
the filter:
Knock off drilling dust from the filter after each drilling process.After
switching off , the dust extractor continues to run for 3-5 seconds.
TECHNICAL DATA
Type | Dust extractor |
---|---|
Production code | 4918 75 01 XXXXXX MJJJJ |
Stroke max. | 96 mm |
Drilling capacity max. | ø 16 / 26 mm |
Drill bit length max. | 160 mm |
Drilling depth max. | 96 mm |
Weight | 1,3 kg |
WARNING
The vibration emission level given in this information sheet has been measured
in accordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future reference.
It is also essential that you read and follow the user manual for the hammer
drill you use.
ROTARY HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can cause
personal injury.
Hold the power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring.
Cutting accessory contacting a „live“ wire may make exposed metal parts of the
power tool „live“ and could give the operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Do not use the dust extractor for drilling work in wood, steel or plastic.
Do not use machines on any material containing asbestos.
The following materials should not be picked up by the vacuum cleaner:
- hazardous dust
- flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)
Despite using the dust extractor, a small amount of dust may still escape.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a suitable dust
protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Only use the appliance if it is in perfect condition.
Never use the dust extractor without a filter, or if the filter is damaged.
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
The dust extractor may only be used as an accessory for the following
machines: Milwaukee M18 FH, M18 FHX, M18 ONEFH, M18 ONEFHX.
Do not use this product in any other way as stated for normal use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may arise in use and the operator should pay special attention to avoid the following:
-
Injury caused by vibration.
Hold the product by designated handles and restrict working time and exposure. -
Exposure to noise can cause hearing injury.
Wear ear protection and limit exposure. -
Injury due to flying debris
Wear eye protection, heavy long trousers, gloves and substancial footwear at all times. -
Inhalation of toxic dusts.
WORKING INSTRUCTIONS
Never use the dust extractor without dust box and HEPA filter in place.
CLEANING
Never use water or compressed air to clean the dust box or HEPA filter.
The ventilation slots of the machine must be kept clear at all times.
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| Please read the instructions carefully before starting
the machine.
---|---
| CAUTION! WARNING! DANGER!
| Remove the battery pack before starting any work
on the machine.
| Always wear goggles when using the machine.
| Wear ear protectors!
| Wear a suitable dust protection mask.
| Wear gloves!
| Accessory – Not included in standard equipment,
available as an accessory.
| Do not dispose of waste batteries, waste electrical and
electronic equipment as unsorted municipal waste. Waste batteries and waste
electrical and electronic equipment must be collected separately.
Waste batteries, waste accumulators and light sources have to be removed from
equipment. Check with your local authority or retailer for recycling advice
and collection point. According to local regulations retailers may have an
obligation to take back waste batteries and Waste electrical and electronic
equipment free of charge. Your contribution to re-use and recycling of waste
batteries and waste electrical and electronic equipment helps to reduce the
demand of raw materials. Waste batteries, in particular containing lithium and
waste Electrical and electronic equipment contain valuable, recyclable
materials, which can adversely impact the environment and the human health, if
not disposed of in an environmentally compatible manner.
Delete personal data from waste equipment, if any.
| European Conformity Mark
| British Confomity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
EC DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulfills all the relevant regulations and directives listed below and that the following harmonized standards have been used.
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product
described under “Technical Data” fulfills all the listed below relevant
regulations and that the following designated standards have been used.
2011/65/EU (RoHS)
2014/30/EU
2006/42/EC
EN 60745-1:2009+A11:2010
EN 60745-2-6:2010
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2022-05-02 Alexander Krug
Managing Director
Authorized to compile the technical file
****| S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2012/3032 (as amended)
BS EN 60745-1:2009+A11:2010
BS EN 60745-2-6:2010
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2022-05-02 Alexander Krug
Managing Director
Authorized to compile the technical fi le:
Techtronic Industries (UK) Ltd
Parkway
Marlow, SL7 1YL
UK
---|---
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
Copyright 2022
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Parkway
Marlow, SL7 1YL
UK
(05.22)
4931 4707 33
Documents / Resources
|
milwaukee M18FCDDEXL-0 18V Li-Ion RedLithium Cordless SDS Compact Dust
Extractor
[pdf] Instruction Manual
M18FCDDEXL-0 18V Li-Ion RedLithium Cordless SDS Compact Dust Extractor,
M18FCDDEXL-0, 18V Li-Ion RedLithium Cordless SDS Compact Dust Extractor, SDS
Compact Dust Extractor, Compact Dust Extractor, Dust Extractor, Extractor
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>