Gl Technologies MIFIC4-EXT 4G Smart Router User Guide

: June 4, 2024
: Gl Technologies

Table of Contents

Gl Technologies MIFIC4-EXT 4G Smart Router
SETTING UP
Connect via Wi-Fi
Connect via LAN
Set up Router
SUPPORT
Technical Supports
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Gl Technologies MIFIC4-EXT 4G Smart Router

SETTING UP

Insert Cards & Power On
When powered up, your MiFi router will broadcast Wi-Fi signal with the SSID: GL-MIFI-xxx.
Note: Hot plug for TF card and MicroSIM card are not supported for this router

Connect via Wi-Fi

Connect to the Wi-Fi called GL-MIFI-xxx, and input the default Wi-Fi password goodlife, which is also printed on the bottom of the router.

Connect via LAN

Set up Router

Visit http://192.168.8.1 in your browser to set up your router; start by choosing your preferred language.

Product name MIFI user manual

Size 105*140ｍｍ
Print Double / Color
Material 200g coated paper
Remarks 5mm
Last updated 2022/08/24

SUPPORT

Repair / Reset
If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button:

Press and hold for 3 seconds, and then release to repair your network.
Press and hold for 10 seconds, and then release to reset the router to factory settings. All user data will be cleared.

Technical Supports

For more detailed and updated instructions, please visit our website docs.gl- inet.com For further questions, you can get help from the following ways:

Email to support@gl-inet.com
Message us on our Facebook: facebook.com/gl.inet.wifi/
Post questions in our forum: forum.gl-inet.com
Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites

WARRANTY

We provide one year limited warranty for routers and 3-month limited warranty for accessories.
Extra warranty may apply according to the local law in which the product purchase took place.
Highly recommend using the included 5V/2A power adapter.
Any damage to the router caused by not following the instructions will render this warranty null and void.
Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
Issues caused by the use of third-party firmware may not get official support from us.
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void.
Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.

FCC ID: 2AFIW-MIFIC4-EXT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement.

FCC Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: 4G Smart Router (FCC ID: 2AFIW-MIFIC4-EXT) has also been tested against this SAR limit. SAR information on this and other pad can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided

The Equipment named above is confirmed to comply with the requirements setout in the European Council Directive on the Approximation of the Laws of the Member States relating to RED (2014/53/EU). The equipment passed the test which was performed according to the following European standards:
EN 301 489-1 V2.2.3 (2019-11); EN 301 489-17 V3.2.3 (2020-07);
EN 301 489-52 V1.1.0 (2016-11)
EN 55032:2015; EN 55035:2017; EN 300 328 V2.2.2 (2019-07);
EN 301 908-1 V13.1.1 (2019-11); EN 301 908-2 V13.1.1 (2020-06);
EN 301 908-13 V13.1.1 (2019-11); EN 62311:2020
EN62368-1:2014+A11:2017
ver. 20220824
This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz;
The Product comply with Directive 2011/65/EU and its amendment directive 2015/863/EU (Rohs2.0)

Hong Kong Office