Sensata MM Series Inverter or Charger Owner’s Manual
- June 12, 2024
- Sensata
Table of Contents
Sensata MM Series Inverter or Charger
Introduction
The MM Series Inverter / Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system. Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Features
- Versatile mounting – Mount the MM Series on a shelf, wall, or even upside down.
- Fan cooled – The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Low battery protection – If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.
- High battery protection – If your battery voltage reaches over the cut-out setting the MM Series will shut down.
- Current overload protection – The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Convenient switches – The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
- Circuit breaker protection – Every model comes with built in input and output circuit breakers for ease of installation.
- Battery temp sensor – The standard battery temp sensor monitors temperatures from 0 – 50° C.
- Buy with ease – The MM Series is backed by a two-year (24-month) parts and labor warranty
Model Numbers
- MM1212-U
- MM1212-F
Available For
- Marine Systems
- RV Systems
Available Accessories
-
DC Load Disconnect
-
Fuse Blocks
MagWeb -
Remote – ME-ARC
-
Remote – ME-RC
-
Remotes – MM-R & MM-RC
Modified Sine Wave
Battery Voltage Options
Continuous Output Options
SPECIFICATIONS
|
MM1212
---|---
INVERTER SPECIFICATIONS
Input battery voltage range| 9 to 16 VDC
Nominal AC output voltage| 120 VAC ± 5%
Output frequency and accuracy| 60 Hz ± 0.1 Hz
1 msec surge current (amps AC)| 42
100 msec surge current (amps AC)| 23
5 sec surge power (real watts)| 2100
10 sec surge power (real watts)| 1900
30 sec surge power (real watts)| 1750
5 min surge power (real watts)| 1450
30 min surge power (real watts)| 1375
Continuous power output at 25° C (with 1.0 PF)| 1200 VA
Continuous current output| 10 AAC
Maximum continuous input current| 160 ADC
Inverter efficiency (peak)| 95%
Transfer time| 16 msecs
Search mode (typical)| 5 watts
No load (120 VAC output, typical)| 18 watts
Waveform| Modified Sine Wave
CHARGER SPECIFICATIONS
Continuous output at 25° C| 70 ADC
Charger efficiency| 88%
Power factor| > .95
Input current at rated output (AC amps)| 9
GENERAL FEATURES AND CAPABILITIES
Transfer relay capability| 20 AAC (input current for charging and pass
through)
Battery temperature compensation| Yes, on models with chargers: 15 ft
Battery Temp Sensor standard
Internal cooling| 0 to 59 cfm variable speed
Overcurrent protection| Yes, with two overlapping circuits
Overtemperature protection| Yes, on transformer and MOSFETS
On/Off with status indicator| Yes, front mounted and easily accessible
Low battery cutout| 10 VDC, adjustable on most models with the ME-RC
remote
AC output/AC input| Hardwire
Output circuit breaker/Input circuit breaker| 15A/20AAC
Listings| ETL Listed to UL/cUL458, CSA C22.2 #107.1-01
Warranty| Two years
ENVIRONMENTAL SPECIFICATIONS
Temperature (Operating/Non-operating)| -20° C to +60° C (-4° F to 140°
F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity| 0 to 95% RH non-condensing
PHYSICAL SPECIFICATIONS
Dimensions (l x w x h)| 16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm)
Mounting| Shelf (top or bottom up) or bulkhead (vents up)
Weight| 20 lb (9 kg)
Shipping weight| 23 lb (10.5 kg)
Max operating altitude| 15,000’ (4570 m)
Construction| ABS plastic top and cast aluminum bottom
GENERAL NOTES
Testing for specifications at 25° C.
Specifications subject to change without notice.
AGENCY APPROVALS & CERTIFICATIONS
- ETL Listed to UL/cUL458, CSA C22.2 #107.1-01
Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.
All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>