onasti KX001 Plastic Step Stool Instruction Manual

onasti KX001 Plastic Step Stool

Product Information

• Product Name: Plastic Step Stool
• Model: KX001
• Manufacturer: Wenzhou Kexuan Children’s Dream Amusement Equipment Co., Ltd
• Manufacturer Address: Bai Long Industrial Zone, Qiaotou town, Yongjia County, Wenzhou City, Zhejiang Province, China
• Support Email: support@onasti.net
• Country of Origin: Made in China

Product Usage Instructions

1. Assembly and disassembly should be done by adults only.
2. Before assembly, check the steps and rungs of the stool for wear and tear to ensure they are strong and sturdy.
3. Close supervision is necessary when the step stool is being used by children.
4. Ensure that the step stool is clean and dry before using it. Dirty and moisture can cause slipping and falling.
5. Make sure there are no hazards or other dangers in the area where the step stool is being used.

Contents Include

• C – Top reversible step
• I – Riser
• F – Anti-slip pad x 6
• J – Screwdriver
• A&B – Right leg & Left leg
• D&E – Bottom step & Mid step
• G – Barrel nut x 2
• H – Screw x 12

Installation Method

Step 1:

Install the bottom step (D), the mid step (E), the barrel nut (G), the riser (I) to Part A with screws (H) using the screwdriver (J).

Step 2:

Install the top step (C) to Part A. Press down to fasten the step. No screws are required for this step.

Step 3:

Install Part B with screws (H) using the screwdriver (J). Put on the anti-slip pads (F) on each foot.

• Model : KX001
• Manufacturer : Wenzhou Kexuan Children’s Dream Amusement Equipment Co., Ltd Manufacturer
• Add : Bai Long Industrial Zone, Qiaotou town, Yongjia County, Wenzhou City, Zhejiang Province,China
• Support email :support@onasti.net

MADE IN CHINA

ATTENTION

1. Assembly and disassembly by adults only.
2. Check the steps and rungs of the stool for wear and tear,and make sure they are strong and sturdy.
3. Close supervision is necessary when used by children.
4. Make sure that the steps tool is clean and dry before usingit.Dirty and moisture can cause you to slip and fall.
5. Make sure there are no hazards or other dangers in the area miIn which you are using the steps tool for example oil or water spillages.
6. Make sure the stool is clean and dry before storing.Place it in a cool and dry location.
7. Always remember to checks tool before each use,change screws and retention clips if there is any rust.
8. Always place the steps tool on even ground that has nomobstructions. Floors should be clean,not slippery.
9. Check all nuts and bolts regularly to ensures tool stays sturdy.
10. One person on this stool at a time.
11. Maximum Load: 70 kg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>