iFi audio LAN iSilencer Ethernet Noise Filter Owner’s Manual
- June 12, 2024
- iFi Audio
Table of Contents
iFi audio LAN iSilencer Ethernet Noise Filter
Product Information
| Product Name: | LAN iSilencer |
|---|---|
| Contents: | 1 x LAN iSilencer, 1 x Quick Start Guide, 1 x Instruction |
card
Input:| RJ45 Socket
Output:| RJ45 Plug
Speed:| 1000/100/10 Mbps
Supported Devices:| Notebook, switch, router, wireless device, etc
Dimensions:| 73.5 x 19 x 16 mm (2.9 x 0.7 x 0.6 inches)
Net Weight:| 17g (0.6 oz)
Limited Warranty:| 12 months* (12 months typical or as permitted/required by
local
reseller laws)
Technology:| Licensed from AMR (UK)
Assembled in:| China
Version:| Ver1.0
Product Usage Instructions
The LAN iSilencer is an Ethernet signal purifier designed for network audio streamers. It helps to filter RF noise and improve the quality of your audio stream. Follow the steps below to use the LAN iSilencer:
- Locate the RJ45 socket on your device (notebook, switch, router, wireless device, etc) where you want to connect the LAN iSilencer.
- Insert the RJ45 Plug of the LAN iSilencer into the RJ45 socket of your device.
- Ensure a stable and secure connection between the LAN iSilencer and your device.
- Once connected, the LAN iSilencer will start purifying the Ethernet signal and reducing RF noise for better audio streaming performance.
Please note that specifications are subject to change without notice. For any warranty claims or further assistance, refer to the provided Quick Start Guide and Instruction card or contact your local reseller.
If you use an Ethernet cable to connect a network audio streamer to a LAN port on your broadband router, you need the LAN iSilencer. These connections are inherently ‘noisy’ – the LAN iSilencer removes electrical noise that distorts the audio signal to unleash the connected audio equipment’s full sonic potential
FEATURES
- Advanced filtration prevents noise from interfering with the digital signal
- Transient Voltage Suppressor (TVS) protects against surges and voltage transients
- Supports Gigabit Ethernet with no speed restrictions
- Network transformer delivers complete electrical isolation
- Shielded case with integral ground wire blocks external interference, minimizes packet loss, and ensures stable signal transmission
- Uses standard RJ45 Ethernet cable connections
- Connect between your broadband router and network audio streamer
CONTENTS
- 1 x LAN iSilencer
- 1 x Quick Start Guide
- 1 x Instruction card
SPECIFICATIONS
- Input: RJ45 Socket
- Output: RJ45 Plug
- Speed: 1000/100/10 Mbps
- Supported General-purpose,
- Devices: notebook, switch, router, wireless device, etc
- Dimensions: 73.5 x 19 x 16 mm 2.9″ x 0.7″ x 0.6″
- Net Weight: 17g (0.6 oz)
- Limited Warranty: 12 months
12 months typical or as permitted/required by local reseller laws.
Specifications are subject to change without notice.
Abbingdon Global Limited 79 Scarisbrick New Road, Southport, PR8 6LJ UK
ABBINGDON EU BV Mercatorweg 28 Arnhem 6827 DC Netherlands
Technology licensed from AMR (UK) Assembled in China. Ver1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>