zelmer ZVC1400WD Vacuum Cleaner User Manual

June 4, 2024
zelmer

zelmer-ZVC1400WD-Vacuum-Cleaner-logo

zelmer ZVC1400WD Vacuum Cleaner

zelmer-ZVC1400WD-Vacuum-Cleaner-product-image

zelmer-ZVC1400WD-Vacuum-Cleaner-01

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING
Please read the instructions for use carefully prior to using the product. store these in a safe place for future reference.

DESCRIPTION

  1. Blowing cover
  2. Rear cover
  3. Handle
  4. Auto cord rewinder
  5. Parking groove
  6. Accessory cover
  7. Speed control board
  8. Power switch
  9. Inhale plug
  10. Hose
  11. Curved tube
  12. Adjustable tube
  13. Double usage brush
  14. Small brush
  15. Small suction nozzle
  16. Combined nozzle
  17. Water barrel
  18. HEPA
  19. Air inhale window

SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard. Plug must be removed from socket-outlet before cleaning or maintaining the appliance.

IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label. The mains connection cable must not be tangled or wrapped around the product during use. Do not pull on the connection cord in order to unplug it. Do not use, connect or disconnect the device to the mains with your hands or feet wet. Proceed according to the conservation and cleaning section of this manual for cleaning. Unplug the product immediately from the mains in the event of any breakdown or damage and contact an authorized Technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand’s Official Technical support service may carry out repairs or procedures on the device. Any incorrect use or improper handling of the product shall render the warranty null and void. Only an authorized technical support service center may carry out repairs on this product. This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial use. In case of misuse or tampering with the product, it will be out of warranty. Do not use the appliance to vacuum liquids (water, etc.), sharp objects (pins, pins, nails, glass, etc), incandescent objects (matches, cigarettes). Never use the turbo brush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc.), flour, cement, plaster, printer or photocopier, toner, etc. Eurogame Sp. zoo. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

OPERATION GUIDANC

  1. Take out the Inhale Plug by pressing the button according to the direction indicated, in the figure at left side.

  2. Open the Rear cover according to the direction indicated in the figure at left side.

  3. After opening the Rear Cover, take out the water barrel by grasping the groove up forward according to the direction indicated out in the figure.

  4. Adding water of proper capacity before operation. Refer to the figure at the left side.
    Note Adding about 0.5 liter water, refer to the figure.

  5. Posit the barrel into the machine after adding water, and make sure that the barrel is setting in proper position in the machine.
    zelmer-ZVC1400WD-Vacuum-Cleaner-18

  6. Replace the Rear Cover.

  7. Plugin the Inhale Plugin to the unit.

  8. Stein the adjust ablative into the Curved Tube and make sure the connection is firm.
    zelmer-ZVC1400WD-Vacuum-Cleaner-22

  • Use of the Telescopic chrome extension tube. Adjust the the tube to a proper length by pressing the control button. And the tube will be lock automatically after releasing the button.

  • Startup and Speed Control Plugin power cord, press the power switch to startup the machine. Presenting switch on the big handle to control speed.4 steps of speed control is available.

  • Suction Power Control It is very easy and convenient to control the suction power by push the pushrod the Curved Tube.

  • Combination nozzle This double-duty brush can be used for cleaning carpet, Adjust the duty of the brush for bare cleaning and carpet cleaning by press the relative button. When the floor nozzle extends out brush, it is for bare floor, if without, for carpet.

  • Press the accessory cover and release, the cover will be open automatically, Take out the accessories. When use, inserter into the telescope picture.

  • Combination nozzles use for cleaning gap, corner, base board and liner gap.

  • The nozzle head can be rotate to the mode of nozzle and brush.

  • Use the small brush can avoid to injuring surface of furniture and carpet.

  • Use for place of dutiful, but the floor nozzle can not reach to.

  • Flowing Function Insert the inhale plug into the rear cover, startup the vacuum cleaner.

  • Stop working of the machine Prestel power switch, pull out the plug from the socket, rewind the power cord by pressing the rewinder switch and hold the plug at the meantime to avoid being injured.

  • Disposal Dispose the hose around the telescopic tube, park the floor nozzle on to the side of machine body by a hook on the floor nozzle.
    Note Avoid to putting the machine under rain or sun.

zelmer-ZVC1400WD-Vacuum-Cleaner-16

DUST EMPTY AND MAINTENANCE

  • DUST EMPTY AND MAINTENANCE

  • Pour out the sew age and rinse the barrel under water.

  • Maintenance Take the filtration rack apart from the machine according to the direction indicated in the figure at left side.

  • Take out the filter, cleaning in water and let it dry naturally. Importance

    1. The filter should be cleaned twice a year. Or if it is visibly dusted, clean it at once.
    2. When operation, filter should be t in.
    3. Check if the filter is fitted improperly or been damaged before use the machine once.
  • After open the back cover, take out the HEPA, dispose dust on the HEPA.
    Note HEPA should be cleaned at least once a year.

  • Open the Air Inhale Window

  • Take out the Air Inhale Window and Air Inhale Filter, clean the filter by water and dry it in air.
    Note: The Air Inhale Filter should be cleaned at least once a year.

  • Fit in the Air Inhale Filter and Window.

TROUBLE SHOOTING

Note Cut power and pull out the plug before starting to get rid of troubles.
If the vacuum power decreases, and sounds abnormally, stop vacuuming or motor over heat. Some vacuum components may be blocked clear the blocked component. Clean or replace if problem persists
If the trouble still persists, please contact our maintenance service department.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection center closest to your home.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals