Shenzhen Ruibosi Electronic RBX-S40 4G Intelligent Solar Energy Alert PTZ Camera User Manual

June 4, 2024
Shenzhen Ruibosi Electronic

Shenzhen LOGO 4G Intelligent Solar Energy Alert PTZ Camera
User ManualShenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy
Alert PTZ Camera V2.2

PRODUCTS & PACKING LIST

1.1 Product picture:Shenzhen Ruibosi Electronic RBXS40 4G Intelligent
Solar Energy Alert PTZ Camera - FIG 1

1.2 Packing list:

Product DiagramShenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar
Energy Alert PTZ Camera - FIG 3 1.3 Quick Setup
1.3.1 Insert the USB cable of the solar panel to the”USB” Silicon Flap on the bracket base for battery charging.
1.3.2 Press the Power switch to turn ON/OFF the camera,
1.3.3 Wait for the voice prompt step by step for pairing the camera with the APP.
l.4 Note:
1.4.1 Before you turn on the camera, please close the silicon flap to avoid rain leakage.
1.4.2. Make sure your phone is connecting to the 2.4Ghz wifi first before you pair the camera.

INSTALLATION

APP INSTALLATION

3.1. Scan the following OR codes or search for “UBox “from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.

http://app.ubianet.com/app/ubox/

3.2. APP REGISTRATION
3.2.1. 0pen the app then input your E-mail address then press ‘Register’. Check and select to agree on the agreement then your E-mail box will get a verification code. ( For better user experience. please allow the opening of all permissions to avoid missing any notifications from the app.)
3.2.2. Input the “Verification code” and press ‘Next’. (if you did not find the mail you might find the code in your email spam box. )
3.2.3. Set the login password and confirm the login password. Then press ‘Register’ to the next step. (For your password safety, the password requires more than 8 characters plus a combination of letters)
3.2.4. Enter your E-mail address, and input your login password. Then press ‘Login’.

Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy Alert
PTZ Camera - FIG 5

WI-FI CONNECTION

4.1. Press ‘Add Family’ then set the room or position as per reminders.
4.2. Enter your family name and then press ‘Next’.
4.3. Input the necessary information just like Country, Province, then press ‘Done’.
4.4. Press ‘Add a device’ to add a smart device

Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy Alert PTZ
Camera - FIG 6| Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy
Alert PTZ Camera - FIG 7
---|---

4.5. insert the SIM card into the device then put the battery into the device, some models need to install the antenna.
4.6. After the power on the device, wait for about 1 minute for the device’s blue LED to light up Then press next.
4.7. If the device’s blue LED does not light up, please check below config notes.
4.8. Find the UID QR code on the drive, then use APP scan the QR code.Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy Alert
PTZ Camera - FIG 8

4.9. APP are search the device on the internet it may take 5-60 seconds.
4.10. Select the name and device location then press ‘Done.’

Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy Alert PTZ
Camera - FIG 9

4.11. The device will enter into the device list automatically. Setup success! The device is ready to use.
4.12. Notes about PIR detection
User can change the PIR detection sensitivity in device settings. we recommend setting sensitivity at “Disabled” or “Low” to reduce false alerts and save battery power in noisy environments.
Disabled: disabled PIR detection.
Low: delay 7 seconds PIR detects a moving.
Medium: delay 5 seconds PIR detects a moving.
*High: delay 1 second PIR detects a moving.

DEVICE SETTING

Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy Alert PTZ
Camera - FIG 10| Shenzhen Ruibosi Electronic RBXS40 4G Intelligent Solar Energy
Alert PTZ Camera - FIG 11
---|---

SPECIAL NOTES!

6.1 The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device’s wake-up time and the number of wake-ups. Therefore, the PIR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times and extend battery life. When the battery is low, please charge the battery immediately.
6.2. Keep the device in the range of your router. Make sure the device is placed close to the Wi-Fi router. If there have to be thick or insulated objects between the device and the Wi-Fi router, which may lead to a weak Wi- Fi signal, please make sure the Wi-Fi signal is at a good level before you start using the device.
6.3. It is a delicate device with a low power consumption design. Every time the device is awakened and will work for a few seconds. After that, the device will enter standby mode to save power. You can set the work time in the app settings.
6.4. Because mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function on your phone to receive push messages.
6.5. This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals