Makerfire LST-009 Mini FPV Goggles User Manual
- June 4, 2024
- MakerFire
Table of Contents
Makerfire LST-009 Mini FPV Goggles
Feature:
- Small size and light weight;
- Low power consumption, Working current 360~400mA;
- Double antenna reception to make the signal more stable;
- RaceBand 40 channel, Auto-Searching;
- 3.0 Inch 480*320 dot high brightness LCD screen;
- Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
- Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
- Universal USB charging interface;
- Real-time video return, Very low time-delay;
- Bilingual menu in support of Chinese and English;
- Support external video signal input;
- Support AV signal output (Connect external DVR);
Specification:
Controls Diagram:
Description
- Key 1: Short press for MENU mode; Long press (More than 3 sec) for Power ON/OFF.
- Key 2: Short press for Auto-Searching (Automatic selection of the strongest channel).
- Key 3: Short press for Band+ (Change bands A-B-E-F-R circularly).
- Key 4: Short press for Channel+ (Change channels 1-2-3-4-5-6-7-8 circularly).
- Eye ring: protect the surrounding parts of the eyes, so that the wear more comfortable.
- Micro-USB Charging port: Supports DC5V only.
- Antenna port A: RP-SMA male.
- Charging indicator: Red light when charging light; full power, the indicator goes off.
- Antenna port B: RP-SMA male.
- AV Jack: In RF receiving mode can output AV signal; In AV mode can enter the video signal.
- Head band: Adjustable headband.
Menu Operation Instructions
In normal mode, press Key 1 to enter the MENU mode. In MENU mode:
- Key 1: Select the option bar.
- Key 2: Return to normal mode.
- Key 3: Value -.
- Key 4: Value +.
AV port Instructions
Dimension Diagram
Not included antennas and headband.
Safety instruction
- Read the entire instruction manual to become familiar with the features of the product before operating.
- Age Recommendation: Over 14 years old. Using any near eye displays on children under 14 can cause eye development problems. This is not a toy.
- Please avoid wet or humid environments.
- Please use standard USB charger, charging voltage can only be 5V.
- AV output and Video input cannot work at the same time, It is forbidden to insert external video in RF receiving mode.
Read User Manual Online (PDF format)
Loading......