GREENJOY GOLFWAVER Golf Radar Sensor User Manual

GREENJOY GOLFWAVER Golf Radar Sensor

Product Information

• User Manual
• Version: V1.0
• PM N: GOLF Waver Launch Monitor
• 2023-03

Revision History

Catalogue

1. Summarize
2. Product specifications
3. Product Appearance description
4. Packing List

Summarize

The radar sensor is mainly used in the swing parameters and flight parameters of golf shots. It is connected with the Bluetooth of the Yueqiu APP on the mobile phone to display related parameters of golf, so as to facilitate customers to evaluate their own shots and provide reference data for improving their own level.

System Description

Radar sensor system

Radar sensor system: including 5V2A power adapter, 1m Type-C Charging cable, Radar sensor;

Product Application scope: used in indoor and outdoor golf amateur and professional personnel to provide data for the evaluation of the reference, to raise their level and professional.

Product specifications

Specifications

Hardware characteristics

• CPU: Based on STC12C5A6052 MCU
• Radar: radio Infineon’s BGT24MTR11BGT24MR2 radar scheme is frequency module adopted
• WiFi/BT module: ESP32-WROOM-32E
• WiFi module: ESP8266-12F
• Battery: 18650, 2600 mAh rechargeable lithium battery
• Charging interface: 5V/2A
• Machine power: 2W

Software characteristics

• Operating system: RT-Thread

Interface Description

General Specifications

• Adapter power supply: 5V/2A
• Full load power: 2.5W
• Working environment temperature: 0°C – 50°C
• Storage Temperature:

Product Appearance description

• Appearance
• Device Usage
• Packing List

Revision History

Summarize

The radar sensor is mainly used in the swing parameters and flight parameters of golf shots. It is connected with the Bluetooth of the Yueqiu APP on the mobile phone to display related parameters of golf, so as to facilitate customers to evaluate their own shots and provide reference data for improving their own level.

System Description

Radar sensor system

• Radar sensor system: including 5V2A power adapter, 1m Type C Charging cable ,

Radar sensor

Figure 1. Block diagram of radar sensor system

Product Application scope

• used in indoor and outdoor golf amateur and professional personnel to provide data to the evaluation of the reference, to raise their level and professional.

Product specifications

Specifications

Hardware characteristics

CPU| Based on STC12C5A6052 MCU

• Radar radio frequency module

| Infineon’s BGT24MTR11\BGT24MR2 radar scheme is adopted
WiFi/BT module| ESP32-WROOM-32E
WiFi module| ESP8266-12F
Battery| 18650,2600 mAh rechargeable lithium battery
Charging interface| 5V/2A
Machine power| ≤2W
Software characteristics
Operating system| RT-Thread

Interface Description

General Specifications

Adapter power supply

Working environment
Temperature| 0℃ ～ 50℃
Storage Temperature| -20℃ ～ 70℃
Humidity| 20% ～ 70%
Mechanical parameter
Size (LWH)| 17010029mm

• Net fuselage
• weight

| 230g
Shell| Painted plastic case (Yellow , Grey , Silver , Black)

Product Appearance description

Appearance

Device Usage

The device interface contains the following configurations

1. A: TYPE-C Indicates the interface
   Used to connect the 5V2A adapter to charge the radar sensor

2. Power button
   Press the power button to turn on the machine, and the buzzer will sound 3 times. Press the power button to turn off the machine, and the buzzer will sound 1 times.

3. Positioning laser start button Button press, line laser light 20S, according to the direction of play set up radar sensor;

Top LED and other display instructions

1. On the startup display, if 4 green LED lights are on, the electricity quantity is
   greater than 85%; if 3 green LED lights are on, the electricity quantity is greater
   than 50%; if 2 green LED lights are on, the equal circuit is greater than 25 %;

2. Plug in the charging cable, the first light on the right is blue, indicating that the
   radar sensor is in the charging state;
   If the blue indicator is blinking, the
   battery is not installed or there is no battery.
   

3. During normal operation, the middle two lights are lit
   

4. The red light on the LED on the left indicates that the battery is installed backwards and needs to be installed again in the correct way
   

5. Instructions for radar battery warehouse

Instructions for use

1. Download and install APP
   

2. Turn on the radar, the radar LED lights up two green lights in the middle (as shown in Figure 8);

3. Place the radar 2 meters away from the TEE position, turn on the positioning laser (start with the button on the body or start the laser in the APP), align the laser line with the center of the golf ball at the tee position, and keep the laser line in a straight line with the direction of the shot
   
   Figure 12

4. APP Turn on the Bluetooth of the mobile phone and open the APP
   

5. Click the upper right corner to search for the device, click the corresponding Bluetooth number, the link is successful
   Figure1 4 Search for a device and click the corresponding device
   Figure15 Successful connection

6. Check the relevant information of radar, check the version number, upgrade the radar, APP start the positioning laser switch Figure 16 View information about connected devices
   Figure 16 Top right check radar power

7. Open the driving range and other scenes, each successful shot will have the relevant parameters of golf flight
   Figure 17 View the motion parameters and trajectory of the golf ball

Figure 18 See more motion parameters and trajectories of golf balls

Packing List

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Canada compliance statements
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>