FW MURPHY EICS Engine Integrated Control System Instruction Manual
- June 4, 2024
- FW MURPHY
Table of Contents
FW MURPHY EICS Engine Integrated Control System
Engine Integrated Control System
Optimizing your engine’s performance and maintaining emission compliance is easier than ever with the FW Murphy Engine Integrated Control System (EICS). It is a complete integration package pre-calibrated specifically for your engine model. EICS combines key components – ignition system (powered by FW Murphy’s IntelliSpark® Ignition technology), air/fuel control, speed governing, interface and diagnostics, sensors, harnesses, catalyst and engine control unit (ECU) – in one package, saving you money and man-hours associated with the installation and setup of separate engine components. The EICS has been pre configured for your convenience, ensuring your engine will run at optimum performance without the need for manual field adjustments. Its D-EPR valve accommodates wide variations in fuel composition and speed/load ranges, maintaining efficiency with load following technology for even the toughest gas lift applications. In addition, the EICS eliminates the need for pretest site visits by maintaining emissions saving you time and money. With EICS you can be certain your site will pass required testing, like Quad J testing, without the need for pretesting to get dialed in.
Features
- An OEM approach to an after-market application
- Two packages available: performance/efficiency package, optional emissions package (includes catalyst)
- One unit, three integrated functions – CD Ignition, air/fuel control and electronic governing speed control
- Pre-calibrated and dyno tested for specific engine models
- Advanced electronic air-fuel ratio control
- Lightning fast response to engine speed/load variations and fuel quality changes
- FW Murphy’s IntelliSpark Ignition Coils for expanded engine diagnostics and dynamic spark adjustment
- Graphical color user interface
- Data sharing via Modbus RS485
- Data logging
Benefits
- Integrated system = simplified installation compared to separate components
- The integrated approach makes more advanced diagnostics possible
- No more setup of generic boxes – EICS is engine specific
- No more dialing in – it’s pre-calibrated
- Optimization of your engine’s performance
- Maintains emissions compliance between testing -no tweaking necessary
- Eliminates magneto failures and premature spark plug changes
- Reduces engine failure diagnostic time
- Reduces costs associated with the engine’s operation
How To Order
An EICS Package is Available for Engine Models
Arrow VRG330CF and VRG 330/A54
Caterpillar G3300 Series
Caterpillar G3406
Cummins G5.9
Cummins G8.3
Cummins KTA19GC (380 & 420 HP)
Waukesha 7042GU & 7042GSI
Waukesha 5794GSI
Waukesha 7044GSI
Contact your FW Murphy sales representative for any details and how to
purchase
- Additional engine configurations may be available.
- Kits are available with magneto conversion for older engines.
- Kits are also available with shielded ignition components.
Step 2 – Determine display variant
Every EICS Engine Kit Requires One Display – Choose One Variant Below
- P/N 48700017 – In Panel Mount Display Kit, Display + EICS Pigtail + RS485 Pigtail
- P/N 48700021 – Remote Mount Display Panel with Switches, in Enclosure
Step 3 – Add optional hardware if desired
Add Optional Emissions Package:
- Emissions kits are available for each engine.
To Add Optional Suction/Discharge Pressure Based Speed Control:
Order the key below and add a standard FW Murphy PXT 4-20ma Pressure Sensor to complete P/N 48700031 – Suction Control/Discharge Control Software Key (requires FW Murphy PXT sensor)
Contact FW Murphy
Contact your FW Murphy sales representative:
- To purchase products and systems
- To view a full list of supported engine models
- To let us know which engine models you would like to see mapped next Contact your FW Murphy sales representative at www.fwmurphy.com.
Diagram of System Overview
References
- FW Murphy Production Controls
- Warranty & Terms of Sale - FW Murphy Production ControlsFW Murphy Production Controls