LLURIA CN4-8-23 Water Resistant Comet 4,8W-m Flex LED Strip Light Owner’s Manual
- July 30, 2024
- LLURIA
Table of Contents
LLURIA CN4-8-23 Water Resistant Comet 4,8W-m Flex LED Strip Light
Specifications
- Product Name: Water Resistant IP65 Comet New 4,8W/m CN4,8 Flex LED strip
- Light Quality: Good
- Usage: Indoor and outdoor
- Available CCT Options: 2300K, 2700K, 3000K, 4000K, 6000K
- Lumens per meter: 395, 405, 410, 425, 455
- Lumens per Watt: 82, 84, 85, 89, 95
- Power: 4.8W/m, 24W total
- Voltage: 24V
- LED Type: 2835
- Length: Up to 20m
- IP Rating: IP65
Product Usage Instructions
Installation
- Ensure the surface is clean and dry before applying the LED strip.
- Connect the strip according to the series connection diagram provided. – For outdoor use, ensure proper weatherproofing measures are taken.
FAQs
Q: Can this LED strip be cut to a specific length?
A: Yes, the LED strip can be cut at designated cutting points to achieve a
custom length.
Q: Is this LED strip suitable for outdoor use?
A: Yes, this LED strip is water-resistant with an IP65 rating, making it
suitable for outdoor installations.
Water Resistant IP65
Flex LED strip with good light quality. Ideal for small or decorative
installations.
For indoor and outdoor use.
Technical data
Technical data|
---|---
Power| 4,8W/m
Roll power 5m| 24W
IP| 65
CRI| >90
R9| >60
Voltage| 24V
LED type| 2835
LEDs/m| 60
Pitch| 16,7mm
Beam angle| 120º
Min. cutting lenght| 100mm
Roll length| 5m/30m
Life time| 50.000h
Ambient temperature| -20~50ºC
**** Storage temperature| -40~80ºC
Warranty years| 8
Dimmable| Sí Yes
Needs heatsink| No
3 MacAdam steps
Dimensions
Circuit diagram
Respect the maximum lengths to avoid drops voltage and variations in light intensity.
Cable section
Distancia LED – Perfil
Minimum distance that should be left at the ends, both sides, between LED strip and profile.
Assembly detail
Lifetime
The life time of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system.
Off cycles are recommended to extend the life of the LEDs.
Warnings
- To ensure the life of the LED, it is request to place on a surface that dissipates the heat they generate.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If diffuser is used with the dissipating profile, there may be variations in the color temperature.
Lluria reserves the right to modify specifications.