Shenzhen Zhixuan Technology 3A Bluetooth Headphone User Manual
- June 12, 2024
- Shenzhen Zhixuan Technology
Table of Contents
Shenzhen Zhixuan Technology 3A Bluetooth Headphone User Manual
On-product information：
Product name: Bluetooth Headphone
model: 3A
Bluetooth version: BT5.0
LED light instructions
- Charging warehouse open cover-The green light is off for 10S
- Charging box cover-Off after the green light turns for 3s
- The cell phone is paired with the headphones-Long press the charging compartment button for 3 seconds, and the white LED indicator light in the charging compartment flashes slowly
- The headphones leave / put into the warehouse-Take the green light once(left and right ears)
- Low power-Orange light flash
- Charging warehouse electricity(Press the key short)-Power> 10%, green light flashing once; power <10%, and orange light flashing four times Connect the charging line-Orange lights are long on for 10S
- Power full grid-Green light is on for 10S
Function Introduction
- starting up：Open the lid of the charging compartment and light on thegreenlight for 10 seconds
- power off：When the headset is back in the charging compartment, close the lid
- The headphones are automatically paired：Under the case of closingthecover, under the normal working condition of the battery voltage in the charging compartment, put the headset in the charging compartment, and left ear and the right ear will be matching within 10 seconds. If the left ear and the right ear cannot be paired, put the left ear and the right ear into the charging compartment, the lid, open the lid of the charging compartment, pressthe charging compartment button for more than 3 seconds, the indicator light becomes the white light slow flash 3 times, then complete the ear pairing•Mobile phone pairing Open the lid of the charging compartment and close the Apple phone, the phone will pop up the connection interface, click connect, press the charging compartment button for more than 3 seconds, the white indicator light flash slowly 3 times, wait for a moment. If it is an Android phone, enter the phone Bluetooth interface search device, select Airpods Pro (Apple Phone can operate on the phone, modify the Bluetooth name of the headset) for matching connection
- Automatic back：Open the lid of the charging compartment, if the left and right ears before the team, the left and right ears will first automatically connect, and will be connected after the phone
- Cancel the pairing：Turn off the Bluetooth or close the headset into thecharging compartment, close the cover, cancel the headset in the charging compartment, open the cover, press the charging compartment button for 3 seconds, flash the white light in the charging compartment for 3 times, makeleft / right ear team and send pop-up data
- Refuse to answer the phone：Left / right ear press twice; pressure sensingworks when not in the ear
- Answer / close the call：Left / right ear press once to answer / end the phone; effective
- The last song：Left / right ear presses three times; pressure sensing works when not in the ear
- The next song:Left / right ear press twice; pressure sensing works when not in the ear
- Pause / play:Left / right ear press once to play / pause; the pressure sensing operation is effective when not in the ear
- Start voice assistant：The iPhone, left / right ear press for 1 second, the default is noise reduction, or start Siri (specific functions need to be set by the iPhone;For Android phone, press left ear for 1 second to start Siri; right ear press for 1 second to reduce noise, close, and switch in transparent mode
- In-ear detection function switch：Apple mobile phone can normally set whether the ear function on the phone; Android mobile phone connected to the headset, left / right headset pressed 5 times to switch whether the ear function; single headset into the ear, automatically switch to transparent mode; two year automatically switch to noise reduction mode; noise reduction mode one headset automatically switch to transparent mode; two ear out, will close transparent mode
Product maintenance
- Disassembling your Bluetooth headset can cause damage, and the warranty will expire.
- Please wipe your headphones with a clean, soft, dry cotton cloth.
- Do not place your headset in an overheated or excessively cold environment, otherwise it may be unused.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>