Einhell TC-LW 1000 Hand Lever Hoist Instruction Manual

: June 12, 2024
: Einhell

Einhell TC-LW 1000 Hand Lever Hoist

Einhell-TC-LW--000-Hand-Lever-Hoist-FIG-1

Product Information

The product is a hand lever hoist designed for horizontal movement of loads. It is available in two models: TC-LW 1000 and TC-LW 2000. The hoist comes with original operating instructions in multiple languages, including German, English, Italian, Swedish, Dutch, Spanish, Slovenian, and Greek.

Technical Specifications

Model: TC-LW 1000 / TC-LW 2000
Art.-Nr.: 22.601.40 / 22.601.50
I.-Nr.: 11018

Product Usage Instructions

Safety Instructions

Warning: The lifting of loads is strictly prohibited!

Delivery Contents
Check the package for any packaging or transport safety devices that may be included.

Before Starting
Ensure that all safety regulations and instructions are read and understood before using the product.

Operation

Warning: Only pull loads horizontally.

Attaching the Hoist to the Load

Attach the rope (9) with the pulley (8) securely to the load to be pulled.
Ensure that the snap lock (10) is closed.

Pulling the Load

Pull the handle down to engage the pawl (4) into the rope pulley (3) by moving the lever (2) down.
Pull the load in the desired direction.
To release the load, move the stop lever (2) down and relax the tension lever.

Cleaning, Maintenance, and Spare Part Ordering

Refer to the user manual for instructions on cleaning, maintenance, and ordering spare parts.

Disposal and Recycling

Follow proper disposal and recycling procedures for the product.

Storage

Store the product in a safe and appropriate location when not in use.

Warranty

Refer to the warranty certificate for warranty information.
We look forward to your visit online at www.isc-gmbh.info!

SYMBOLS

Danger!
When using the equipment, a few safety pre-cautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the in-formation is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety instructions.

Safety regulations

Danger!
- Read all safety regulations and instructions. Any errors made in following the safety regula-tions and instructions may result in an electric shock, ﬁ re and/or serious injury.
- Keep all safety regulations and instructions in a safe place for future use.
Warning:
The lifting of loads is strictly prohibited!
Warning:
The equipment may only be used for pulling loads.
Warning:
There is a risk of crush injuries to ﬁngers!

1. Wear protective clothing which is suitable for the particular environment for the whole time while carrying out your work and take safety precautions appropriate for the particular environment to prevent accidents.
2. Wear gloves at all times while working with the equipment.
3. The equipment is only allowed to be opera-ted by persons who have carefully read and understood these instructions; the equipment is not allowed to be operated by persons who have not been given appropriate instruction or who have health issues.
4. The equipment is only allowed to be operated by a single person. No other persons are allowed to be within the work area.
5. Never allow children to come anywhere near the equipment.
6.  The equipment may only be used for pulling loads horizontally. The weight is not allowed
7. Take care at all times to make sure that you never allow any parts of your body such as,

e. g. ﬁngers, to get into rotating parts or parts under tension.

8. Before starting the work you intend to carry out, always check the equipment each time to ensure that all its components are in perfect working order. In particular, check that all screw connections are secure and that the carabiner hooks are in perfect condition, to prevent the unintended release of the hook.
9. Never use the equipment if it is defective or damaged. If the cable has any fractures or is damaged in any other way, it must be repla-ed. In this case, immediately contact the manufacturer or arrange for the equipment to be checked and repaired by a qualiﬁed expert.
10. Always exercise care and due caution while working. Do not apply excessive force.
11. Operate the hand lever smoothly to avoid abrupt jolts or tangling.
12. Do not increase the leverage eﬀect of the hand lever by using an extension tube or other aid.
13. Look out for any defects occurring during use. In the event of any anomalies during use, stop using the equipment immediately.
14. Never use the equipment as a pulley block or similar.
15. Never use any electrical devices to operate the equipment. This equipment is designed for manual operation only.
16. Never wind the cable around an object like a loop in order to hang the hook in the cable. Never run the cable around corners and never draw it over edges.
17. Never use the equipment as a tow rope.
18. Store the equipment only in a dry room.
19. Never use the equipment in an explosive environment or in damp locations.
20. The ambient temperature for operation must be between -10°C and +50°C.

Layout and items supplied

Layout (Fig. 1a/1b)

Einhell-TC-LW--000-Hand-Lever-Hoist-FIG-2

Fastening hook
Stop lever
Pulley
Retaining catch
Tensioning spring
Clamping lever
Load hook
Guide roller
Wire cable
Snap lock

Items supplied

Open the packaging and take out the equip-ment with care.
Remove the packaging material and any packaging and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, please keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suﬀocating!
Original operating instructions

Proper use

The hand lever hoist is a device for moving loads horizontally.
The equipment is to be used only for its prescri-bed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or inju-ries of any kind caused as a result of this.
Please note that our equipment has not been de-signed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

TC-LW 1000
- Max. tensile load in kg: 1000
- Cable length in m: 2.2
- Cable diameter in mm : 4.8
- Max. eff ective distance in m: 1.2
TC-LW 2000
- Max. tensile load in kg: 2000
- Cable length in m: 3.3
- Cable diameter in mm: 6
- Max. eff ective distance in m : 1.6

Before using the equipment

Before you use the equipment to pull a load, you must familiarize yourself with the way in which the equipment works “without a load”.
Make sure the equipment is fastened secu-rely. Be particularly critical when choosing a fastening point, as the fastening point you choose must be capable of withstanding double the load. If you are unsure whether the point you have chosen is the right one, select an alternative point instead.
Fasten the equipment in such a way that it cannot change its position during use.
The snap lock (10) on the fastening hook
(1) and on the load hook (7) must always be closed during operation, to prevent the load being released abruptly.

Operation

Warning: Only pull loads horizontally.
Caution: Wear gloves to protect your hands.

Fastening the hoist to the load (Figs. 1a, 1b, 2, 3, 4)

Attach the load hook (7), which is fastened to the cable (9) by the guide roller (8), securely to the load you intend to pull.
Check that the snap lock (10) is closed.
Push the tensioning spring (5) up and into the release position, which releases the retaining catch (4) from the pulley (3).
By holding the stop lever (2) in the released position, the cable can be unwound and the hoist can be pulled for attaching at the second attachment point.

Pulling a load (Figs. 2, 5)

Push the tensioning spring (5) down and into the pull position, which engages the retaining catch (4) in the pulley (3) again.
Now move the hand lever (6) using pumping movements. This rewinds the cable (9) onto the pulley again and pulls the load to the desi-red position.

Slackening and releasing the hoist (Fig. 6) Danger: It is possible for the load to be re-leased abruptly!

Make sure that the load is fastened securely to prevent it being released unintentionally.
To release the hoist, push the tensioning spring (5) into the release position (upwards), which releases the retaining catch (4).
Press the stop lever (2) down using the clam-ping lever (6).
Hold the stop lever in this position with your finger and release the clamping lever again.
Releasing the clamping lever slackens the cable.
You can now release the load hook (7) and the fastening hook (1) and remove the hand lever hoist.

Cleaning, maintenance and ordering of spare parts

Cleaning and maintenance

For a service life which is as long as possible and to maintain the operational safety of the hand lever hoist, remove dirt from your hand lever hoist at regular intervals, carefully apply grease to the parts after use and store it in a dry location.
Do not undertake any technical modiﬁ cations or repairs to your hand lever hoist yourself. These must be carried out by an expert.
The hand lever hoist must be checked for da-mage at regular intervals.
The hand lever hoist must be checked at regular intervals to ensure that it is in proper working order.

Ordering replacement parts:

Please quote the following data when ordering replacement parts:
- Type of machine
- Article number of the machine
- Identification number of the machine
- Replacement part number of the part required
For our latest prices and information please go to www.isc-gmbh.info

Disposal and recycling

The equipment is supplied in packaging to pre-vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask in your local council oﬃces.

Storage

Store the equipment and accessories in a dark and dry place at above freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original packaging.
The reprinting or reproduction by any other me-ans, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes

Warranty certiﬁcate

Dear Customer,

All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the service number shown. Please note the following terms under which guarantee claims can be made:
1. These guarantee terms apply to consumers only, i.e. natural persons intending to use this product neither for their commercial activities nor for any other self-employed activities. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory rights of guarantee. Your statutory guarantee claims are not aﬀ ected by this guarantee. Our guarantee is free of charge to you.
2. . The warranty services cover only defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below and are limited to either the rectiﬁ cation of said defects on the product or the replacement of the product, whichever we prefer.
  Please note that our devices are not designed for use in commercial, trade or professional applica-tions. A guarantee contract will not be created if the device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by ex-posing the device to abnormal environmental conditions or by lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for ex-ample by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device.
1. The guarantee is valid for a period of 24 months starting from the purchase date of the device. Gu-arantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts ﬁ tted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts ﬁ tted. This also applies if an on-site service is used.
2. To make a claim under the guarantee, please register the defective device at: www.isc-gmbh.info. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identiﬁ cation will not be possible. If the defect is covered by our guarantee, then the item in question will either be repaired immediately and returned to you or we will send you a new replacement.
Of course, we are also happy oﬀ er a chargeable repair service for any defects which are not covered by the scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send the device to our service address.
Also refer to the restrictions of this warranty concerning wear parts, consumables and missing parts as set out in the service information in these operating instructions.