V-TAC VT-6310-2 Rechargeable Trolley Speaker Instruction Manual

V-TAC VT-6310-2 Rechargeable Trolley Speaker

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC products. V-TAC will serve you the best. Please read these instructions carefully & keep this user manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at their best.

Multi-Language Manual QR CODE
Please scan the QR code to access the manual in multiple languages.

TECHNICAL SPECIFICATIONS

• Frequency Range: 2.4-2.48Ghz
• Working Distance: up to 15 meters in open space.
• Supporting: USB/TF card play
• FM Radio: Frequency 87.5 1080MHz
• Remote Control: up to 5m in open space.
• LED light with on/off Switch
• P.M.P.O power: 2000w
• Distortion 1.0%
• Frequency response: 180Hz-20Khz
• Microphone sensitivity: -40dB
• Working time: Music time 2 to 4 hours
• Input jack: Aux input, wired microphone input
• Charging input power: DC 15V INPUT (Power Adaptor- AC:100-240V)
• Charging time: 5 to 6 hours

CHARGING INDICATOR

• Charging: The led light will be in red color
• Full: When full-charged the led light will be in green color.
• Charging Time: 5 to 6 hours
• Working Time: 2 to 4 hours

PANEL FUNCTION

1. USB/ TF/AUX INPUT
   GUITAR/MICROPHONE1/MICROPHONE2 INPUT JACK

2. MAIN VOLUME/GUITAR VOLUME/ MICROPHONE VOLUME/ECHO VOLUME

3. MIC: short press then adjust the volume to control mic volume short press again and adjust the volume to control mic echo

   • GUITAR: press then adjust the volume to control guitar volume REC

4. EQ/MIC PRIORITY/LIGHT SW

5. TREBLE/BASS

6. REPEAT

7. PREVIOUS SONG

8. PAUSE/PLAY

9. NEXT SONG

10. MODE(FM/AUX/BLUETOOTH/USB/TF/TWS MODE)

11. DC 15V INPUT

12. EXT DC 12V INPUT

13. POWER ON/OFF

REMOTE FUNCTION

REMOTE FUNCTION DECLARATION

1. MUTE/MODE (LINE IN/USB/TF/AUX/BLUETOOTH/FM)
2. 0-9
3. ECHO+/ECHO-/EQ/GUITAR VOLUME+/GUITAR VOLUME-
4. TREBLE+/TREBLE-
5. VOLUME+/VOLUME-/MIC VOLUME+/MIC VOLUME-/LIGHT SW
6. BASS+/BASS-
7. PREVIOUS SONG/CHANNEL PAUSE/PLAY NEXT SONG/CHANNEL
8. MIC PRIORITY/REPEAT/REC/FOLDER

REC FUNCTION

HOW TO USE THE RECORDING FUNCTION:

• STEP 1: Make sure the unit is switched on, and there is a USB memory stick or TF card inserted in the slot.
• STEP 2: Plug and test the microphone upon plugging. The device is ready to record once your v oice is audible from the speaker.
• STEP 3: Press the button ‘REC’ on the remote control to start/stop recording, you are freely to rec what you want.

Press the button ‘REC’ to play your recording.

TWS FUNCTION

You can connect your one speaker with another speaker and enjoy a True Wireless Stereo experience.

1. Turn ON speaker NO.1 (Master speaker).
2. Press the MODE button to interchange the Bluetooth function (screen message bLUE).
3. Turn ON speaker NO.2 (Slave speaker).
4. Press the MODE button (Slave speaker) to interchange Bluetooth function (screen message bLUE).
5. Keep pressing the “NEXT” button (Slave speaker) until the “BLUETOOTH CONNECTED” voice, The speakers will pair automatically.
6. Connect your audio device to the MASTER speaker and enjoy the TRUE WIRELESS STEREO sound.

WIRELESS FUNCTION

• STEP 1: Press the mode button on the front panel to launch the Bluetooth application. This will show the Bluetooth logo shows on the screen.
• STEP 2: Toggle the Bluetooth switch on to activate. The device will automati-cally begin to scan for nearby Bluetooth devices.
• STEP 3: Tap “V-TAC VT-6310-2” on your list of devices. Depending on the device you are trying to connect the speaker to, it may be necessary to enter a passcode. Enter the default passcode “0000” if prompted by the device. Then, wait for your device to be connected successfully.
• STEP 4: Tap the entry for Bluetooth accessory when it is detected by the smartphone or computer and displayed on the screen. Then it can use Bluetooth to operate in conjunction with the accessory.

INSTRUCTIONS

1. This unit uses a rechargeable battery. When the battery power is depleted, please plug the device to an electric socket with the correct input voltage.
2. When the unit is charging, please make sure to switch on the AC/DC option, then safely unplug when finished.
3. On first use, the battery must be charged for 10 to 12 hours.
4. The unit’s battery working time lasts up to 2 to 4 hours, depending on the usage.

ATTENTION

1. To maintain battery life, please charge the battery every time the power is completely depleted. Damage may occur if the battery is not charged for longer periods, so please use and charge the battery at regular intervals.
2. Our company reserves the right to update the product without any notice.
3. If you have any issue with the product, kindly contact a professional technician. Do not open the unit yourself.
4. For safety reasons, keep the device away from children.

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>