SIEMENS CAB2, CAB3 Series Medium and Large Transponder Doors Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
SIEMENS CAB2, CAB3 Series Medium and Large Transponder Doors
Installation Instructions
Models CAB2-XBD / CAB3-XBD / CAB2-XRD / CAB3-XRD
Medium and Large Transponder Doors
INTRODUCTION
The Models CAB2-XBD / CAB2-XRD and CAB3-XBD / CAB3-XRD Transponder Doors from
Siemens Industry, Inc., are outer doors for CAB2-BB/-RB and CAB3-BB/-RB
Enclosure Backboxes respectively. (Refer Figure 1.) CAB2-XBD and CAB3-XBD
doors are black; CAB2-XRD and CAB3-XRD doors are red. Use the Transponder
Doors with louvered vents when visual indication of the system is not
required. They attach to the backbox by hinge pins. CAB2-XBD and CAB2-XRD
doors secure to the backbox with one keyed latch; CAB3-XBD and CAB3-XRD doors
secure to the backbox with two keyed latches.
CAB2-XBD / CAB2-XRD and CAB3-XBD / CAB3-XRD Transponder Doors are for indoor
use only in dry environments.
INSTALLATION
- Insert the hinge pins on the door in the hinges on the backbox. (Refer to Figure 2.)
- Install the ground strap by fastening it to the door and the backbox. (Refer to Figure 3.)
- Close the door and secure with the key latch.
COMPATIBILITY
- The CAB2-XBD / CAB2-XRD can be used on CAB2-BB/-RB backboxes only.
- The CAB3-XBD / CAB3-XRD can be used on CAB3-BB/-RB backboxes only.
SPECIFICATIONS
- CAB2-XBD : 26-1/8 W x 1 D x 44-3/4 L
- CAB3-XBD: 26-1/8 W x 1 D x 62-1/2 L
Siemens Industry, Inc. Building Technologies Division Florham Park, NJ
Siemens Building Technologies, Ltd. Fire Safety & Security Products
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada