GIANNI INDUSTRIES INC L-500 Outswing Narrow Frame Door User Manual
- June 12, 2024
- GIANNI INDUSTRIES INC
Table of Contents
GIANNI INDUSTRIES INC L-500 Outswing Narrow Frame Door
Product Information
The product is a Bracket L-500 designed for use with outswing narrow frame doors. It is used in combination with an electromagnetic lock system, specifically the 10010, 10020, 10040, and 10060 Series. The L-500 bracket is suitable for use with magnet grades ranging from 300 lbs to 1200 lbs.
Product Usage Instructions
- Start by drilling the holes marked on the provided template.
- Using an 8 mm drill bit, create a hole through the door. Enlarge the hole to 16 mm from the outside.
- Using a 6.8 mm drill bit, create a hole from the inside. Screw in a M8-1.25 thread into the hole.
- Using an 8 mm drill bit, create a hole through the door. Enlarge the hole to 12.7 mm from the outside. The thickness of the door should be 36 mm.
- Assemble the electromagnet and L bracket using an Allen wrench.
- Turn on the power of the electromagnet and allow it to bond with the armature plate.
- Press the L bracket against the door frame.
- Securely fasten the L bracket to the door frame.
- Test the unit by tapping the plugs into the electromagnet.
For further inquiries or assistance, please contact Gianni Industries, Inc. at:
Tel: +886-2-2267-7986
Fax: +886-2-2267-9876
Email: inquiry1@gianni.com.tw
Website: www.gianni.com.tw
The A value in the table below shows the minimum requirement distance of the door frame for different electromagnetic lock models.
| Magnet Grade | A Value | Option Brackets |
|---|---|---|
| 300 LBS | 38 mm | L-150, L-EM150… |
| 600 LBS | 42 mm | L-300, L-10001ST… |
| 800 LBS | 48 mm | L-750, L-350, L-400… |
| 1200 LBS | 60 mm | L-500, L-600… |
Application for the Electromagnet: 10010, 10020, 10040, 10060 Series.
DIMENSIONS
Installation of L bracket on Outswing Doors
- Fold the mounting template 90º angle along the dotted line.
- Drill the holes marked on the template.
Hollow Metal Door
- Drill a hole 8 mm in diameter through the door. Enlarge the hole to 16 mm from the outside.
Reinforced Door
- Drill a hole 6.8 mm in diameter from the inside. Screw with a M8-1.25 thread.
Solid Door
-
Drill a hole 8 mm in diameter through the door. Enlarge the hole to 12.7 mm from the outside. The thickness of the door is 36 mm.
-
Assemble the electromagnet and L bracket with an Allen wrench.
-
Turn on the power of the electromagnet. Let the electromagnet and the armature plate bond together. Press the L bracket against the door frame.
-
Fasten the L bracket on the door frame.
Finish
- Test the unit. Tap the plugs into the electromagnet.
GIANNI INDUSTRIES, INC
- Tel: +886-2-2267-7986 Fax: +886-2-2267-9876
- www.gianni.com.tw. inquiry1@gianni.com.tw.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>