NAS ISO-130 Speaker Stand Instruction Manual
- October 30, 2023
- NAS
Table of Contents
NAS ISO-130 Speaker Stand
Product Information
The speaker stand is a sturdy and reliable accessory designed to securely hold speakers. It consists of two sections – a base piece and a top piece. The stand is easy to assemble and provides a stable platform for your speakers, ensuring optimal sound quality.
Product Usage Instructions
- Place the base piece on a firm and flat surface, ensuring stability.
- Insert the spacers into the designated slots on the base piece.
- Carefully align the top piece with the spacers, ensuring proper positioning.
- Gently push down on the corners of the top piece to join it with the base piece.
- Ensure that both sections are securely connected without any gaps or misalignment.
- Once assembled, place your speaker on the top piece of the stand, ensuring it is centered and balanced.
- Adjust the height of the stand if necessary, according to your preference.
- Connect the speaker cables to your audio source and enjoy high-quality sound.
Please note that it is important not to squeeze or force the top and bottom sections together during assembly, as this may cause breakage. Follow the provided instructions carefully to ensure proper assembly and functionality of the speaker stand.
Assembly Instructions
Attention
- Do not squeeze the top and bottom sections together as this may cause breakage.
Instead
- Place the base piece on a firm, flat surface; insert the spacers and carefully line up the top piece (Fig. 1). Then, gently push down the corners to join the sections together (Fig. 2).
Contacts
Head Office
- 127 Merrindale Drive
- Croydon, VIC 3136 Australia
- T: (03) 8756 2600
- E: sales@nas.solutions
- W: www.nas.solutions
NSW Office
- Unit 7, 287 Victoria Road Rydalmere, NSW 2116 Australia
- T: (02) 9898 0670
- E: sales@nas.solutions
Auckland Office
- 7F Douglas Alexander Parade Rosedale, Auckland 0632 New Zealand
- T: +61 (0)9 414 4220
- E: salesnz@nas.solutions
Read User Manual Online (PDF format)
Loading......